Merge tag 'phy-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
 "New Support:

   - Qualcomm SM8650 UFS, PCIe and USB/DP Combo PHY, eUSB2 PHY, SDX75
     USB3, X1E80100 USB3 support

   - Mediatek MT8195 support

   - Rockchip RK3128 usb2 support

   - TI SGMII mode for J784S4

  Updates:

   - Qualcomm v7 register offsets updates

   - Mediatek tphy support for force phy mode switch"

* tag 'phy-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (34 commits)
  phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J784S4
  phy: ti: gmii-sel: Enable SGMII mode for J784S4
  phy: qcom-qmp-usb: Add Qualcomm X1E80100 USB3 PHY support
  dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add X1E80100 USB PHY binding
  phy: qcom-qmp-combo: Add x1e80100 USB/DP combo phys
  dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document X1E80100 compatible
  dt-bindings: phy: qcom: snps-eusb2: Document the X1E80100 compatible
  phy: mediatek: tphy: add support force phy mode switch
  dt-bindings: phy: mediatek: tphy: add a property for force-mode switch
  phy: phy-can-transceiver: insert space after include
  phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY Settings
  dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: fix path to header
  phy: renesas: phy-rcar-gen2: use select for GENERIC_PHY
  phy: qcom-qmp: qserdes-txrx: Add v7 register offsets
  phy: qcom-qmp: qserdes-txrx: Add V6 N4 register offsets
  phy: qcom-qmp: qserdes-com: Add v7 register offsets
  phy: qcom-qmp: pcs-usb: Add v7 register offsets
  phy: qcom-qmp: pcs: Add v7 register offsets
  phy: qcom-qmp: qserdes-txrx: Add some more v6.20 register offsets
  phy: qcom-qmp: qserdes-com: Add some more v6 register offsets
  ...

Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml

@@ -16,20 +16,8 @@ properties:
   "#phy-cells":
     const: 0
 
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - "#phy-cells"
 
 additionalProperties: false
-
-examples:
-  - |
-    phy@0 {
-          compatible = "amlogic,g12a-mipi-dphy-analog";
-          reg = <0x0 0xc>;
-          #phy-cells = <0>;
-    };

Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml

@@ -9,16 +9,6 @@ title: Amlogic AXG shared MIPI/PCIE analog PHY
 maintainers:
   - Remi Pommarel <repk@triplefau.lt>
 
-description: |+
-  The Everything-Else Power Domains node should be the child of a syscon
-  node with the required property:
-
-  - compatible: Should be the following:
-                "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"
-
-  Refer to the bindings described in
-  Documentation/devicetree/bindings/mfd/syscon.yaml
-
 properties:
   compatible:
     const: amlogic,axg-mipi-pcie-analog-phy
@@ -31,10 +21,3 @@ required:
   - "#phy-cells"
 
 additionalProperties: false
-
-examples:
-  - |
-    mpphy: phy {
-          compatible = "amlogic,axg-mipi-pcie-analog-phy";
-          #phy-cells = <0>;
-    };

Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml

@@ -31,6 +31,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt8188-mipi-tx
+              - mediatek,mt8195-mipi-tx
               - mediatek,mt8365-mipi-tx
           - const: mediatek,mt8183-mipi-tx
       - const: mediatek,mt2701-mipi-tx

Documentation/devicetree/bindings/phy/mediatek,tphy.yaml

@@ -235,6 +235,15 @@ patternProperties:
           Specify the flag to enable BC1.2 if support it
         type: boolean
 
+      mediatek,force-mode:
+        description:
+          The force mode is used to manually switch the shared phy mode between
+          USB3 and PCIe, when USB3 phy type is selected by the consumer, and
+          force-mode is set, will cause phy's power and pipe toggled and force
+          phy as USB3 mode which switched from default PCIe mode. But perfer to
+          use the property "mediatek,syscon-type" for newer SoCs that support it.
+        type: boolean
+
       mediatek,syscon-type:
         $ref: /schemas/types.yaml#/definitions/phandle-array
         maxItems: 1

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml

@@ -36,6 +36,8 @@ properties:
       - qcom,sm8450-qmp-gen4x2-pcie-phy
       - qcom,sm8550-qmp-gen3x2-pcie-phy
       - qcom,sm8550-qmp-gen4x2-pcie-phy
+      - qcom,sm8650-qmp-gen3x2-pcie-phy
+      - qcom,sm8650-qmp-gen4x2-pcie-phy
 
   reg:
     minItems: 1
@@ -147,6 +149,8 @@ allOf:
               - qcom,sm8450-qmp-gen3x2-pcie-phy
               - qcom,sm8550-qmp-gen3x2-pcie-phy
               - qcom,sm8550-qmp-gen4x2-pcie-phy
+              - qcom,sm8650-qmp-gen3x2-pcie-phy
+              - qcom,sm8650-qmp-gen4x2-pcie-phy
     then:
       properties:
         clocks:
@@ -189,6 +193,7 @@ allOf:
           contains:
             enum:
               - qcom,sm8550-qmp-gen4x2-pcie-phy
+              - qcom,sm8650-qmp-gen4x2-pcie-phy
     then:
       properties:
         resets:

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml

@@ -32,6 +32,7 @@ properties:
       - qcom,sm8350-qmp-ufs-phy
       - qcom,sm8450-qmp-ufs-phy
       - qcom,sm8550-qmp-ufs-phy
+      - qcom,sm8650-qmp-ufs-phy
 
   reg:
     maxItems: 1
@@ -112,6 +113,7 @@ allOf:
               - qcom,sm8250-qmp-ufs-phy
               - qcom,sm8350-qmp-ufs-phy
               - qcom,sm8550-qmp-ufs-phy
+              - qcom,sm8650-qmp-ufs-phy
     then:
       properties:
         clocks:

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml

@@ -32,6 +32,7 @@ properties:
       - qcom,sm8150-qmp-usb3-uni-phy
       - qcom,sm8250-qmp-usb3-uni-phy
       - qcom,sm8350-qmp-usb3-uni-phy
+      - qcom,x1e80100-qmp-usb3-uni-phy
 
 
   reg:
@@ -135,6 +136,7 @@ allOf:
               - qcom,sm8150-qmp-usb3-uni-phy
               - qcom,sm8250-qmp-usb3-uni-phy
               - qcom,sm8350-qmp-usb3-uni-phy
+              - qcom,x1e80100-qmp-usb3-uni-phy
     then:
       properties:
         clocks:
@@ -171,6 +173,7 @@ allOf:
             enum:
               - qcom,sa8775p-qmp-usb3-uni-phy
               - qcom,sc8280xp-qmp-usb3-uni-phy
+              - qcom,x1e80100-qmp-usb3-uni-phy
     then:
       required:
         - power-domains

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml

@@ -27,6 +27,8 @@ properties:
       - qcom,sm8350-qmp-usb3-dp-phy
       - qcom,sm8450-qmp-usb3-dp-phy
       - qcom,sm8550-qmp-usb3-dp-phy
+      - qcom,sm8650-qmp-usb3-dp-phy
+      - qcom,x1e80100-qmp-usb3-dp-phy
 
   reg:
     maxItems: 1
@@ -62,12 +64,12 @@ properties:
   "#clock-cells":
     const: 1
     description:
-      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+      See include/dt-bindings/phy/phy-qcom-qmp.h
 
   "#phy-cells":
     const: 1
     description:
-      See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
+      See include/dt-bindings/phy/phy-qcom-qmp.h
 
   orientation-switch:
     description:
@@ -128,6 +130,8 @@ allOf:
             - qcom,sc8280xp-qmp-usb43dp-phy
             - qcom,sm6350-qmp-usb3-dp-phy
             - qcom,sm8550-qmp-usb3-dp-phy
+            - qcom,sm8650-qmp-usb3-dp-phy
+            - qcom,x1e80100-qmp-usb3-dp-phy
     then:
       required:
         - power-domains

Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml

@@ -18,6 +18,8 @@ properties:
       - items:
           - enum:
               - qcom,sdx75-snps-eusb2-phy
+              - qcom,sm8650-snps-eusb2-phy
+              - qcom,x1e80100-snps-eusb2-phy
           - const: qcom,sm8550-snps-eusb2-phy
       - const: qcom,sm8550-snps-eusb2-phy
 

drivers/phy/mediatek/phy-mtk-tphy.c

@@ -185,6 +185,10 @@
 #define P3D_RG_CDR_BIR_LTD1		GENMASK(28, 24)
 #define P3D_RG_CDR_BIR_LTD0		GENMASK(12, 8)
 
+#define U3P_U3_PHYD_TOP1		0x100
+#define P3D_RG_PHY_MODE			GENMASK(2, 1)
+#define P3D_RG_FORCE_PHY_MODE		BIT(0)
+
 #define U3P_U3_PHYD_RXDET1		0x128
 #define P3D_RG_RXDET_STB2_SET		GENMASK(17, 9)
 
@@ -327,6 +331,7 @@ struct mtk_phy_instance {
 	int discth;
 	int pre_emphasis;
 	bool bc12_en;
+	bool type_force_mode;
 };
 
 struct mtk_tphy {
@@ -768,6 +773,23 @@ static void u3_phy_instance_init(struct mtk_tphy *tphy,
 	void __iomem *phya = u3_banks->phya;
 	void __iomem *phyd = u3_banks->phyd;
 
+	if (instance->type_force_mode) {
+		/* force phy as usb mode, default is pcie rc mode */
+		mtk_phy_update_field(phyd + U3P_U3_PHYD_TOP1, P3D_RG_PHY_MODE, 1);
+		mtk_phy_set_bits(phyd + U3P_U3_PHYD_TOP1, P3D_RG_FORCE_PHY_MODE);
+		/* power down phy by ip and pipe reset */
+		mtk_phy_set_bits(u3_banks->chip + U3P_U3_CHIP_GPIO_CTLD,
+				 P3C_FORCE_IP_SW_RST | P3C_MCU_BUS_CK_GATE_EN);
+		mtk_phy_set_bits(u3_banks->chip + U3P_U3_CHIP_GPIO_CTLE,
+				 P3C_RG_SWRST_U3_PHYD | P3C_RG_SWRST_U3_PHYD_FORCE_EN);
+		udelay(10);
+		/* power on phy again */
+		mtk_phy_clear_bits(u3_banks->chip + U3P_U3_CHIP_GPIO_CTLD,
+				   P3C_FORCE_IP_SW_RST | P3C_MCU_BUS_CK_GATE_EN);
+		mtk_phy_clear_bits(u3_banks->chip + U3P_U3_CHIP_GPIO_CTLE,
+				   P3C_RG_SWRST_U3_PHYD | P3C_RG_SWRST_U3_PHYD_FORCE_EN);
+	}
+
 	/* gating PCIe Analog XTAL clock */
 	mtk_phy_set_bits(u3_banks->spllc + U3P_SPLLC_XTALCTL3,
 			 XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD);
@@ -1120,6 +1142,9 @@ static void phy_parse_property(struct mtk_tphy *tphy,
 {
 	struct device *dev = &instance->phy->dev;
 
+	if (instance->type == PHY_TYPE_USB3)
+		instance->type_force_mode = device_property_read_bool(dev, "mediatek,force-mode");
+
 	if (instance->type != PHY_TYPE_USB2)
 		return;
 

drivers/phy/phy-can-transceiver.c

@@ -6,11 +6,11 @@
  *
  */
 #include <linux/of.h>
-#include<linux/phy/phy.h>
-#include<linux/platform_device.h>
-#include<linux/module.h>
-#include<linux/gpio.h>
-#include<linux/gpio/consumer.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/mux/consumer.h>
 
 struct can_transceiver_data {

drivers/phy/phy-core.c

@@ -959,7 +959,7 @@ struct phy *phy_create(struct device *dev, struct device_node *node,
 	if (!phy)
 		return ERR_PTR(-ENOMEM);
 
-	id = ida_simple_get(&phy_ida, 0, 0, GFP_KERNEL);
+	id = ida_alloc(&phy_ida, GFP_KERNEL);
 	if (id < 0) {
 		dev_err(dev, "unable to get id\n");
 		ret = id;
@@ -1232,7 +1232,7 @@ static void phy_release(struct device *dev)
 	dev_vdbg(dev, "releasing '%s'\n", dev_name(dev));
 	debugfs_remove_recursive(phy->debugfs);
 	regulator_put(phy->pwr);
-	ida_simple_remove(&phy_ida, phy->id);
+	ida_free(&phy_ida, phy->id);
 	kfree(phy);
 }
 

drivers/phy/qualcomm/phy-qcom-qmp-combo.c

@@ -1203,6 +1203,127 @@ static const struct qmp_phy_init_tbl sc8280xp_usb43dp_pcs_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
 };
 
+static const struct qmp_phy_init_tbl x1e80100_usb43dp_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER1, 0x62),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER2, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0, 0xc2),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1, 0xc2),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_BUF_ENABLE, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_CFG, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x41),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MSB_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MSB_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE1, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE1, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE1, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE1_MODE0, 0xba),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE2_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE1_MODE1, 0xba),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE2_MODE1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x13),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CORE_CLK_DIV_MODE0, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORECLK_DIV_MODE1, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORE_CLK_EN, 0xa0),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x76),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO_MODE1, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_INTEGLOOP_GAIN0_MODE0, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_INTEGLOOP_GAIN0_MODE1, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAXVAL2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SVS_MODE_CLK_SEL, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_BG_TIMER, 0x0a),
+};
+
+static const struct qmp_phy_init_tbl x1e80100_usb43dp_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_TX_LANE_MODE_1, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_TX_LANE_MODE_2, 0x50),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_TX_LANE_MODE_3, 0x50),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_TX_RES_CODE_LANE_OFFSET_TX, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_TX_RES_CODE_LANE_OFFSET_RX, 0x0a),
+};
+
+static const struct qmp_phy_init_tbl x1e80100_usb43dp_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_SIGDET_CNTRL, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_SIGDET_ENABLES, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_MODE_RATE_0_1_B0, 0xc3),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_MODE_RATE_0_1_B1, 0xc3),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_MODE_RATE_0_1_B2, 0xd8),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_MODE_RATE_0_1_B3, 0x9e),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_MODE_RATE_0_1_B4, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_MODE_RATE_0_1_B5, 0xb6),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_MODE_RATE_0_1_B6, 0x64),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_MODE_RATE2_B0, 0xd6),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_MODE_RATE2_B1, 0xee),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_MODE_RATE2_B2, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_MODE_RATE2_B3, 0x9a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_MODE_RATE2_B4, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_MODE_RATE2_B5, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_MODE_RATE2_B6, 0xe3),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_IVCM_CAL_CODE_OVERRIDE, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_RX_IVCM_CAL_CTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_RX_SUMMER_CAL_SPD_MODE, 0x2f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_UCDR_PI_CONTROLS, 0x15),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_UCDR_PI_CTRL1, 0xd0),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_UCDR_PI_CTRL2, 0x48),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_UCDR_SB2_GAIN2_RATE2, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_RX_IVCM_POSTCAL_OFFSET, 0x7c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_VGA_CAL_CNTRL1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_VGA_CAL_MAN_VAL, 0x04),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_DFE_DAC_ENABLE1, 0x88),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_DFE_3, 0x45),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_GM_CAL, 0x0d),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_UCDR_FO_GAIN_RATE2, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_UCDR_SO_GAIN_RATE2, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_Q_PI_INTRINSIC_BIAS_RATE32, 0x2f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_N4_RX_RX_BKUP_CTRL1, 0x14),
+};
+
+static const struct qmp_phy_init_tbl x1e80100_usb43dp_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG1, 0xc4),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG2, 0x89),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG3, 0x20),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG6, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_REFGEN_REQ_CONFIG1, 0x21),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_RX_SIGDET_LVL, 0x55),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_CDR_RESET_TIME, 0x0a),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG1, 0xd4),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG2, 0x30),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_PCS_TX_RX_CONFIG, 0x0c),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG1, 0x4b),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG5, 0x10),
+};
+
+static const struct qmp_phy_init_tbl x1e80100_usb43dp_pcs_usb_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
 /* list of regulators */
 struct qmp_regulator_data {
 	const char *name;
@@ -1682,6 +1803,51 @@ static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = {
 	.regs			= qmp_v5_5nm_usb3phy_regs_layout,
 };
 
+static const struct qmp_phy_cfg x1e80100_usb3dpphy_cfg = {
+	.offsets		= &qmp_combo_offsets_v5,
+
+	.serdes_tbl		= x1e80100_usb43dp_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(x1e80100_usb43dp_serdes_tbl),
+	.tx_tbl			= x1e80100_usb43dp_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(x1e80100_usb43dp_tx_tbl),
+	.rx_tbl			= x1e80100_usb43dp_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(x1e80100_usb43dp_rx_tbl),
+	.pcs_tbl		= x1e80100_usb43dp_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(x1e80100_usb43dp_pcs_tbl),
+	.pcs_usb_tbl		= x1e80100_usb43dp_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(x1e80100_usb43dp_pcs_usb_tbl),
+
+	.dp_serdes_tbl		= qmp_v6_dp_serdes_tbl,
+	.dp_serdes_tbl_num	= ARRAY_SIZE(qmp_v6_dp_serdes_tbl),
+	.dp_tx_tbl		= qmp_v6_dp_tx_tbl,
+	.dp_tx_tbl_num		= ARRAY_SIZE(qmp_v6_dp_tx_tbl),
+
+	.serdes_tbl_rbr		= qmp_v6_dp_serdes_tbl_rbr,
+	.serdes_tbl_rbr_num	= ARRAY_SIZE(qmp_v6_dp_serdes_tbl_rbr),
+	.serdes_tbl_hbr		= qmp_v6_dp_serdes_tbl_hbr,
+	.serdes_tbl_hbr_num	= ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr),
+	.serdes_tbl_hbr2	= qmp_v6_dp_serdes_tbl_hbr2,
+	.serdes_tbl_hbr2_num	= ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr2),
+	.serdes_tbl_hbr3	= qmp_v6_dp_serdes_tbl_hbr3,
+	.serdes_tbl_hbr3_num	= ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr3),
+
+	.swing_hbr_rbr		= &qmp_dp_v5_voltage_swing_hbr_rbr,
+	.pre_emphasis_hbr_rbr	= &qmp_dp_v5_pre_emphasis_hbr_rbr,
+	.swing_hbr3_hbr2	= &qmp_dp_v5_voltage_swing_hbr3_hbr2,
+	.pre_emphasis_hbr3_hbr2 = &qmp_dp_v5_pre_emphasis_hbr3_hbr2,
+
+	.dp_aux_init		= qmp_v4_dp_aux_init,
+	.configure_dp_tx	= qmp_v4_configure_dp_tx,
+	.configure_dp_phy	= qmp_v4_configure_dp_phy,
+	.calibrate_dp_phy	= qmp_v4_calibrate_dp_phy,
+
+	.reset_list		= msm8996_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v45_usb3phy_regs_layout,
+};
+
 static const struct qmp_phy_cfg sm6350_usb3dpphy_cfg = {
 	.offsets		= &qmp_combo_offsets_v3,
 
@@ -3518,6 +3684,14 @@ static const struct of_device_id qmp_combo_of_match_table[] = {
 		.compatible = "qcom,sm8550-qmp-usb3-dp-phy",
 		.data = &sm8550_usb3dpphy_cfg,
 	},
+	{
+		.compatible = "qcom,sm8650-qmp-usb3-dp-phy",
+		.data = &sm8550_usb3dpphy_cfg,
+	},
+	{
+		.compatible = "qcom,x1e80100-qmp-usb3-dp-phy",
+		.data = &x1e80100_usb3dpphy_cfg,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qmp_combo_of_match_table);

drivers/phy/qualcomm/phy-qcom-qmp-pcie.c

@@ -1909,6 +1909,35 @@ static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
 	QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_G4_FOM_EQ_CONFIG5, 0xf2),
 };
 
+static const struct qmp_phy_init_tbl sm8650_qmp_gen4x2_pcie_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_PI_CONTROLS, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_IVCM_CAL_CTRL2, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_DFE_3, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_VGA_CAL_MAN_VAL, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_GM_CAL, 0x0d),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_EQU_ADAPTOR_CNTRL4, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_SIGDET_ENABLES, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_PHPRE_CTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B0, 0xd3),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B1, 0xd3),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B3, 0x9a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B4, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B5, 0xb6),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B6, 0xee),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B0, 0x23),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B1, 0x9b),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B2, 0x60),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B3, 0xdf),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B4, 0x43),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B5, 0x76),
+	QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B6, 0xff),
+};
+
 static const struct qmp_phy_init_tbl sa8775p_qmp_gen4x2_pcie_serdes_alt_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
 	QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f),
@@ -3047,6 +3076,36 @@ static const struct qmp_phy_cfg sm8550_qmp_gen4x2_pciephy_cfg = {
 	.has_nocsr_reset	= true,
 };
 
+static const struct qmp_phy_cfg sm8650_qmp_gen4x2_pciephy_cfg = {
+	.lanes = 2,
+
+	.offsets		= &qmp_pcie_offsets_v6_20,
+
+	.tbls = {
+		.serdes			= sm8550_qmp_gen4x2_pcie_serdes_tbl,
+		.serdes_num		= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_serdes_tbl),
+		.tx			= sm8550_qmp_gen4x2_pcie_tx_tbl,
+		.tx_num			= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_tx_tbl),
+		.rx			= sm8650_qmp_gen4x2_pcie_rx_tbl,
+		.rx_num			= ARRAY_SIZE(sm8650_qmp_gen4x2_pcie_rx_tbl),
+		.pcs			= sm8550_qmp_gen4x2_pcie_pcs_tbl,
+		.pcs_num		= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_pcs_tbl),
+		.pcs_misc		= sm8550_qmp_gen4x2_pcie_pcs_misc_tbl,
+		.pcs_misc_num		= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_pcs_misc_tbl),
+		.ln_shrd		= sm8550_qmp_gen4x2_pcie_ln_shrd_tbl,
+		.ln_shrd_num		= ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_ln_shrd_tbl),
+	},
+	.reset_list		= sdm845_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
+	.vreg_list		= sm8550_qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(sm8550_qmp_phy_vreg_l),
+	.regs			= pciephy_v5_regs_layout,
+
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.phy_status		= PHYSTATUS_4_20,
+	.has_nocsr_reset	= true,
+};
+
 static const struct qmp_phy_cfg sa8775p_qmp_gen4x2_pciephy_cfg = {
 	.lanes			= 2,
 	.offsets		= &qmp_pcie_offsets_v5_20,
@@ -3820,6 +3879,12 @@ static const struct of_device_id qmp_pcie_of_match_table[] = {
 	}, {
 		.compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy",
 		.data = &sm8550_qmp_gen4x2_pciephy_cfg,
+	}, {
+		.compatible = "qcom,sm8650-qmp-gen3x2-pcie-phy",
+		.data = &sm8550_qmp_gen3x2_pciephy_cfg,
+	}, {
+		.compatible = "qcom,sm8650-qmp-gen4x2-pcie-phy",
+		.data = &sm8650_qmp_gen4x2_pciephy_cfg,
 	},
 	{ },
 };

drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h

@@ -12,6 +12,7 @@
 #define QPHY_V6_PCS_UFS_SW_RESET			0x008
 #define QPHY_V6_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB	0x00c
 #define QPHY_V6_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB	0x010
+#define QPHY_V6_PCS_UFS_PCS_CTRL1			0x020
 #define QPHY_V6_PCS_UFS_PLL_CNTL			0x02c
 #define QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL		0x030
 #define QPHY_V6_PCS_UFS_TX_SMALL_AMP_DRV_LVL		0x038

drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v7.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_USB_V7_H_
+#define QCOM_PHY_QMP_PCS_USB_V7_H_
+
+#define QPHY_V7_PCS_USB3_POWER_STATE_CONFIG1		0x00
+#define QPHY_V7_PCS_USB3_AUTONOMOUS_MODE_CTRL		0x08
+#define QPHY_V7_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR		0x14
+#define QPHY_V7_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL	0x18
+#define QPHY_V7_PCS_USB3_RXEQTRAINING_DFE_TIME_S2	0x3c
+#define QPHY_V7_PCS_USB3_RCVR_DTCT_DLY_U3_L		0x40
+#define QPHY_V7_PCS_USB3_RCVR_DTCT_DLY_U3_H		0x44
+
+#endif

drivers/phy/qualcomm/phy-qcom-qmp-pcs-v7.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V7_H_
+#define QCOM_PHY_QMP_PCS_V7_H_
+
+/* Only for QMP V7 PHY - USB/PCIe PCS registers */
+#define QPHY_V7_PCS_SW_RESET			0x000
+#define QPHY_V7_PCS_PCS_STATUS1			0x014
+#define QPHY_V7_PCS_POWER_DOWN_CONTROL		0x040
+#define QPHY_V7_PCS_START_CONTROL		0x044
+#define QPHY_V7_PCS_POWER_STATE_CONFIG1		0x090
+#define QPHY_V7_PCS_LOCK_DETECT_CONFIG1		0x0c4
+#define QPHY_V7_PCS_LOCK_DETECT_CONFIG2		0x0c8
+#define QPHY_V7_PCS_LOCK_DETECT_CONFIG3		0x0cc
+#define QPHY_V7_PCS_LOCK_DETECT_CONFIG6		0x0d8
+#define QPHY_V7_PCS_REFGEN_REQ_CONFIG1		0x0dc
+#define QPHY_V7_PCS_RX_SIGDET_LVL		0x188
+#define QPHY_V7_PCS_RCVR_DTCT_DLY_P1U2_L	0x190
+#define QPHY_V7_PCS_RCVR_DTCT_DLY_P1U2_H	0x194
+#define QPHY_V7_PCS_RATE_SLEW_CNTRL1		0x198
+#define QPHY_V7_PCS_CDR_RESET_TIME		0x1b0
+#define QPHY_V7_PCS_ALIGN_DETECT_CONFIG1	0x1c0
+#define QPHY_V7_PCS_ALIGN_DETECT_CONFIG2	0x1c4
+#define QPHY_V7_PCS_PCS_TX_RX_CONFIG		0x1d0
+#define QPHY_V7_PCS_EQ_CONFIG1			0x1dc
+#define QPHY_V7_PCS_EQ_CONFIG2			0x1e0
+#define QPHY_V7_PCS_EQ_CONFIG5			0x1ec
+
+#endif

drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h

@@ -22,6 +22,8 @@
 #define QSERDES_V6_COM_DIV_FRAC_START2_MODE1			0x34
 #define QSERDES_V6_COM_DIV_FRAC_START3_MODE1			0x38
 #define QSERDES_V6_COM_HSCLK_SEL_1				0x3c
+#define QSERDES_V6_COM_INTEGLOOP_GAIN0_MODE1			0x40
+#define QSERDES_V6_COM_INTEGLOOP_GAIN1_MODE1			0x44
 #define QSERDES_V6_COM_VCO_TUNE1_MODE1				0x48
 #define QSERDES_V6_COM_VCO_TUNE2_MODE1				0x4c
 #define QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE1		0x50
@@ -48,6 +50,7 @@
 #define QSERDES_V6_COM_VCO_TUNE2_MODE0				0xac
 #define QSERDES_V6_COM_BG_TIMER					0xbc
 #define QSERDES_V6_COM_SSC_EN_CENTER				0xc0
+#define QSERDES_V6_COM_SSC_ADJ_PER1				0xc4
 #define QSERDES_V6_COM_SSC_PER1					0xcc
 #define QSERDES_V6_COM_SSC_PER2					0xd0
 #define QSERDES_V6_COM_PLL_POST_DIV_MUX				0xd8
@@ -56,6 +59,7 @@
 #define QSERDES_V6_COM_SYS_CLK_CTRL				0xe4
 #define QSERDES_V6_COM_SYSCLK_BUF_ENABLE			0xe8
 #define QSERDES_V6_COM_PLL_IVCO					0xf4
+#define QSERDES_V6_COM_PLL_IVCO_MODE1				0xf8
 #define QSERDES_V6_COM_SYSCLK_EN_SEL				0x110
 #define QSERDES_V6_COM_RESETSM_CNTRL				0x118
 #define QSERDES_V6_COM_LOCK_CMP_EN				0x120
@@ -63,6 +67,7 @@
 #define QSERDES_V6_COM_VCO_TUNE_CTRL				0x13c
 #define QSERDES_V6_COM_VCO_TUNE_MAP				0x140
 #define QSERDES_V6_COM_VCO_TUNE_INITVAL2			0x148
+#define QSERDES_V6_COM_VCO_TUNE_MAXVAL2				0x158
 #define QSERDES_V6_COM_CLK_SELECT				0x164
 #define QSERDES_V6_COM_CORE_CLK_EN				0x170
 #define QSERDES_V6_COM_CMN_CONFIG_1				0x174

drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v7.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_COM_V7_H_
+#define QCOM_PHY_QMP_QSERDES_COM_V7_H_
+
+/* Only for QMP V7 PHY - QSERDES COM registers */
+
+#define QSERDES_V7_COM_SSC_STEP_SIZE1_MODE1			0x00
+#define QSERDES_V7_COM_SSC_STEP_SIZE2_MODE1			0x04
+#define QSERDES_V7_COM_CP_CTRL_MODE1				0x10
+#define QSERDES_V7_COM_PLL_RCTRL_MODE1				0x14
+#define QSERDES_V7_COM_PLL_CCTRL_MODE1				0x18
+#define QSERDES_V7_COM_CORECLK_DIV_MODE1			0x1c
+#define QSERDES_V7_COM_LOCK_CMP1_MODE1				0x20
+#define QSERDES_V7_COM_LOCK_CMP2_MODE1				0x24
+#define QSERDES_V7_COM_DEC_START_MODE1				0x28
+#define QSERDES_V7_COM_DEC_START_MSB_MODE1			0x2c
+#define QSERDES_V7_COM_DIV_FRAC_START1_MODE1			0x30
+#define QSERDES_V7_COM_DIV_FRAC_START2_MODE1			0x34
+#define QSERDES_V7_COM_DIV_FRAC_START3_MODE1			0x38
+#define QSERDES_V7_COM_HSCLK_SEL_1				0x3c
+#define QSERDES_V7_COM_INTEGLOOP_GAIN0_MODE1			0x40
+#define QSERDES_V7_COM_INTEGLOOP_GAIN1_MODE1			0x44
+#define QSERDES_V7_COM_VCO_TUNE1_MODE1				0x48
+#define QSERDES_V7_COM_VCO_TUNE2_MODE1				0x4c
+#define QSERDES_V7_COM_BIN_VCOCAL_CMP_CODE1_MODE1		0x50
+#define QSERDES_V7_COM_BIN_VCOCAL_CMP_CODE2_MODE1		0x54
+#define QSERDES_V7_COM_BIN_VCOCAL_CMP_CODE1_MODE0		0x58
+#define QSERDES_V7_COM_BIN_VCOCAL_CMP_CODE2_MODE0		0x5c
+#define QSERDES_V7_COM_SSC_STEP_SIZE1_MODE0			0x60
+#define QSERDES_V7_COM_SSC_STEP_SIZE2_MODE0			0x64
+#define QSERDES_V7_COM_CP_CTRL_MODE0				0x70
+#define QSERDES_V7_COM_PLL_RCTRL_MODE0				0x74
+#define QSERDES_V7_COM_PLL_CCTRL_MODE0				0x78
+#define QSERDES_V7_COM_PLL_CORE_CLK_DIV_MODE0			0x7c
+#define QSERDES_V7_COM_LOCK_CMP1_MODE0				0x80
+#define QSERDES_V7_COM_LOCK_CMP2_MODE0				0x84
+#define QSERDES_V7_COM_DEC_START_MODE0				0x88
+#define QSERDES_V7_COM_DEC_START_MSB_MODE0			0x8c
+#define QSERDES_V7_COM_DIV_FRAC_START1_MODE0			0x90
+#define QSERDES_V7_COM_DIV_FRAC_START2_MODE0			0x94
+#define QSERDES_V7_COM_DIV_FRAC_START3_MODE0			0x98
+#define QSERDES_V7_COM_HSCLK_HS_SWITCH_SEL_1			0x9c
+#define QSERDES_V7_COM_INTEGLOOP_GAIN0_MODE0			0xa0
+#define QSERDES_V7_COM_INTEGLOOP_GAIN1_MODE0			0xa4
+#define QSERDES_V7_COM_VCO_TUNE1_MODE0				0xa8
+#define QSERDES_V7_COM_VCO_TUNE2_MODE0				0xac
+#define QSERDES_V7_COM_BG_TIMER					0xbc
+#define QSERDES_V7_COM_SSC_EN_CENTER				0xc0
+#define QSERDES_V7_COM_SSC_ADJ_PER1				0xc4
+#define QSERDES_V7_COM_SSC_PER1					0xcc
+#define QSERDES_V7_COM_SSC_PER2					0xd0
+#define QSERDES_V7_COM_PLL_POST_DIV_MUX				0xd8
+#define QSERDES_V7_COM_PLL_BIAS_EN_CLK_BUFLR_EN			0xdc
+#define QSERDES_V7_COM_CLK_ENABLE1				0xe0
+#define QSERDES_V7_COM_SYS_CLK_CTRL				0xe4
+#define QSERDES_V7_COM_SYSCLK_BUF_ENABLE			0xe8
+#define QSERDES_V7_COM_PLL_IVCO					0xf4
+#define QSERDES_V7_COM_PLL_IVCO_MODE1				0xf8
+#define QSERDES_V7_COM_SYSCLK_EN_SEL				0x110
+#define QSERDES_V7_COM_RESETSM_CNTRL				0x118
+#define QSERDES_V7_COM_LOCK_CMP_EN				0x120
+#define QSERDES_V7_COM_LOCK_CMP_CFG				0x124
+#define QSERDES_V7_COM_VCO_TUNE_CTRL				0x13c
+#define QSERDES_V7_COM_VCO_TUNE_MAP				0x140
+#define QSERDES_V7_COM_VCO_TUNE_INITVAL2			0x148
+#define QSERDES_V7_COM_VCO_TUNE_MAXVAL2				0x158
+#define QSERDES_V7_COM_CLK_SELECT				0x164
+#define QSERDES_V7_COM_CORE_CLK_EN				0x170
+#define QSERDES_V7_COM_CMN_CONFIG_1				0x174
+#define QSERDES_V7_COM_SVS_MODE_CLK_SEL				0x17c
+#define QSERDES_V7_COM_CMN_MISC_1				0x184
+#define QSERDES_V7_COM_CMN_MODE					0x188
+#define QSERDES_V7_COM_PLL_VCO_DC_LEVEL_CTRL			0x198
+#define QSERDES_V7_COM_AUTO_GAIN_ADJ_CTRL_1			0x1a4
+#define QSERDES_V7_COM_AUTO_GAIN_ADJ_CTRL_2			0x1a8
+#define QSERDES_V7_COM_AUTO_GAIN_ADJ_CTRL_3			0x1ac
+#define QSERDES_V7_COM_ADDITIONAL_MISC				0x1b4
+#define QSERDES_V7_COM_ADDITIONAL_MISC_2			0x1b8
+#define QSERDES_V7_COM_ADDITIONAL_MISC_3			0x1bc
+#define QSERDES_V7_COM_CMN_STATUS				0x1d0
+#define QSERDES_V7_COM_C_READY_STATUS				0x1f8
+
+#endif

drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h

@@ -10,10 +10,18 @@
 #define QSERDES_UFS_V6_TX_RES_CODE_LANE_RX			0x2c
 #define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX		0x30
 #define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_RX		0x34
+#define QSERDES_UFS_V6_TX_LANE_MODE_1				0x7c
+#define QSERDES_UFS_V6_TX_FR_DCC_CTRL				0x108
 
 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2		0x08
 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4		0x10
+#define QSERDES_UFS_V6_RX_UCDR_SO_SATURATION			0x28
+#define QSERDES_UFS_V6_RX_UCDR_PI_CTRL1				0x58
+#define QSERDES_UFS_V6_RX_RX_TERM_BW_CTRL0			0xc4
+#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2			0xd4
+#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4			0xdc
 #define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL			0x178
+#define QSERDES_UFS_V6_RX_INTERFACE_MODE			0x1e0
 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0			0x208
 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1			0x20c
 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3			0x214

drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h

@@ -23,6 +23,7 @@
 #define QSERDES_V6_TX_PARRATE_REC_DETECT_IDLE_EN		0x60
 #define QSERDES_V6_TX_BIST_PATTERN7				0x7c
 #define QSERDES_V6_TX_LANE_MODE_1				0x84
+#define QSERDES_V6_TX_LANE_MODE_2				0x88
 #define QSERDES_V6_TX_LANE_MODE_3				0x8c
 #define QSERDES_V6_TX_LANE_MODE_4				0x90
 #define QSERDES_V6_TX_LANE_MODE_5				0x94

drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h

@@ -15,10 +15,13 @@
 
 #define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2			0x08
 #define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3			0x0c
+#define QSERDES_V6_20_RX_UCDR_SO_GAIN_RATE_2			0x18
 #define QSERDES_V6_20_RX_UCDR_PI_CONTROLS			0x20
 #define QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3		0x34
 #define QSERDES_V6_20_RX_IVCM_CAL_CTRL2				0x9c
 #define QSERDES_V6_20_RX_IVCM_POSTCAL_OFFSET			0xa0
+#define QSERDES_V6_20_RX_DFE_1					0xac
+#define QSERDES_V6_20_RX_DFE_2					0xb0
 #define QSERDES_V6_20_RX_DFE_3					0xb4
 #define QSERDES_V6_20_RX_VGA_CAL_MAN_VAL			0xe8
 #define QSERDES_V6_20_RX_GM_CAL					0x10c
@@ -41,5 +44,6 @@
 #define QSERDES_V6_20_RX_MODE_RATE3_B4				0x220
 #define QSERDES_V6_20_RX_MODE_RATE3_B5				0x224
 #define QSERDES_V6_20_RX_MODE_RATE3_B6				0x228
+#define QSERDES_V6_20_RX_BKUP_CTRL1				0x22c
 
 #endif

drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_n4.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_V6_N4_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_V6_N4_H_
+
+#define QSERDES_V6_N4_TX_RES_CODE_LANE_OFFSET_TX	0x30
+#define QSERDES_V6_N4_TX_RES_CODE_LANE_OFFSET_RX	0x34
+#define QSERDES_V6_N4_TX_LANE_MODE_1			0x78
+#define QSERDES_V6_N4_TX_LANE_MODE_2			0x7c
+#define QSERDES_V6_N4_TX_LANE_MODE_3			0x80
+
+#define QSERDES_V6_N4_RX_UCDR_FO_GAIN_RATE2		0x8
+#define QSERDES_V6_N4_RX_UCDR_SO_GAIN_RATE2		0x18
+#define QSERDES_V6_N4_RX_UCDR_PI_CONTROLS		0x20
+#define QSERDES_V6_N4_RX_IVCM_CAL_CODE_OVERRIDE		0x94
+#define QSERDES_V6_N4_RX_RX_IVCM_CAL_CTRL2		0x9c
+#define QSERDES_V6_N4_RX_RX_IVCM_POSTCAL_OFFSET		0xa0
+#define QSERDES_V6_N4_RX_DFE_3				0xb4
+#define QSERDES_V6_N4_RX_VGA_CAL_CNTRL1			0xe0
+#define QSERDES_V6_N4_RX_VGA_CAL_MAN_VAL		0xe8
+#define QSERDES_V6_N4_RX_GM_CAL				0x10c
+#define QSERDES_V6_N4_RX_SIGDET_ENABLES			0x148
+#define QSERDES_V6_N4_RX_SIGDET_CNTRL			0x14c
+#define QSERDES_V6_N4_RX_SIGDET_DEGLITCH_CNTRL		0x154
+#define QSERDES_V6_N4_RX_DFE_CTLE_POST_CAL_OFFSET	0x194
+#define QSERDES_V6_N4_RX_Q_PI_INTRINSIC_BIAS_RATE32	0x1dc
+#define QSERDES_V6_N4_RX_UCDR_PI_CTRL1			0x23c
+#define QSERDES_V6_N4_RX_UCDR_PI_CTRL2			0x240
+#define QSERDES_V6_N4_RX_UCDR_SB2_GAIN2_RATE2		0x27c
+#define QSERDES_V6_N4_RX_DFE_DAC_ENABLE1		0x298
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B0		0x2b8
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B1		0x2bc
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B2		0x2c0
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B3		0x2c4
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B4		0x2c8
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B5		0x2cc
+#define QSERDES_V6_N4_RX_MODE_RATE_0_1_B6		0x2d0
+#define QSERDES_V6_N4_RX_MODE_RATE2_B0			0x2d4
+#define QSERDES_V6_N4_RX_MODE_RATE2_B1			0x2d8
+#define QSERDES_V6_N4_RX_MODE_RATE2_B2			0x2dc
+#define QSERDES_V6_N4_RX_MODE_RATE2_B3			0x2e0
+#define QSERDES_V6_N4_RX_MODE_RATE2_B4			0x2e4
+#define QSERDES_V6_N4_RX_MODE_RATE2_B5			0x2e8
+#define QSERDES_V6_N4_RX_MODE_RATE2_B6			0x2ec
+#define QSERDES_V6_N4_RX_RX_SUMMER_CAL_SPD_MODE		0x30c
+#define QSERDES_V6_N4_RX_RX_BKUP_CTRL1			0x310
+
+#endif

drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v7.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_V7_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_V7_H_
+
+#define QSERDES_V7_TX_CLKBUF_ENABLE				0x08
+#define QSERDES_V7_TX_RESET_TSYNC_EN				0x1c
+#define QSERDES_V7_TX_PRE_STALL_LDO_BOOST_EN			0x20
+#define QSERDES_V7_TX_TX_BAND					0x24
+#define QSERDES_V7_TX_INTERFACE_SELECT				0x2c
+#define QSERDES_V7_TX_RES_CODE_LANE_TX				0x34
+#define QSERDES_V7_TX_RES_CODE_LANE_RX				0x38
+#define QSERDES_V7_TX_RES_CODE_LANE_OFFSET_TX			0x3c
+#define QSERDES_V7_TX_RES_CODE_LANE_OFFSET_RX			0x40
+#define QSERDES_V7_TX_PARRATE_REC_DETECT_IDLE_EN		0x60
+#define QSERDES_V7_TX_BIST_PATTERN7				0x7c
+#define QSERDES_V7_TX_LANE_MODE_1				0x84
+#define QSERDES_V7_TX_LANE_MODE_2				0x88
+#define QSERDES_V7_TX_LANE_MODE_3				0x8c
+#define QSERDES_V7_TX_LANE_MODE_4				0x90
+#define QSERDES_V7_TX_LANE_MODE_5				0x94
+#define QSERDES_V7_TX_RCV_DETECT_LVL_2				0xa4
+#define QSERDES_V7_TX_TRAN_DRVR_EMP_EN				0xc0
+#define QSERDES_V7_TX_TX_INTERFACE_MODE				0xc4
+#define QSERDES_V7_TX_VMODE_CTRL1				0xc8
+#define QSERDES_V7_TX_PI_QEC_CTRL				0xe4
+
+#define QSERDES_V7_RX_UCDR_FO_GAIN				0x08
+#define QSERDES_V7_RX_UCDR_SO_GAIN				0x14
+#define QSERDES_V7_RX_UCDR_FASTLOCK_FO_GAIN			0x30
+#define QSERDES_V7_RX_UCDR_SO_SATURATION_AND_ENABLE		0x34
+#define QSERDES_V7_RX_UCDR_FASTLOCK_COUNT_LOW			0x3c
+#define QSERDES_V7_RX_UCDR_FASTLOCK_COUNT_HIGH			0x40
+#define QSERDES_V7_RX_UCDR_PI_CONTROLS				0x44
+#define QSERDES_V7_RX_UCDR_SB2_THRESH1				0x4c
+#define QSERDES_V7_RX_UCDR_SB2_THRESH2				0x50
+#define QSERDES_V7_RX_UCDR_SB2_GAIN1				0x54
+#define QSERDES_V7_RX_UCDR_SB2_GAIN2				0x58
+#define QSERDES_V7_RX_AUX_DATA_TCOARSE_TFINE			0x60
+#define QSERDES_V7_RX_TX_ADAPT_POST_THRESH			0xcc
+#define QSERDES_V7_RX_VGA_CAL_CNTRL1				0xd4
+#define QSERDES_V7_RX_VGA_CAL_CNTRL2				0xd8
+#define QSERDES_V7_RX_GM_CAL					0xdc
+#define QSERDES_V7_RX_RX_EQU_ADAPTOR_CNTRL2			0xec
+#define QSERDES_V7_RX_RX_EQU_ADAPTOR_CNTRL3			0xf0
+#define QSERDES_V7_RX_RX_EQU_ADAPTOR_CNTRL4			0xf4
+#define QSERDES_V7_RX_RX_IDAC_TSETTLE_LOW			0xf8
+#define QSERDES_V7_RX_RX_IDAC_TSETTLE_HIGH			0xfc
+#define QSERDES_V7_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1		0x110
+#define QSERDES_V7_RX_SIDGET_ENABLES				0x118
+#define QSERDES_V7_RX_SIGDET_CNTRL				0x11c
+#define QSERDES_V7_RX_SIGDET_DEGLITCH_CNTRL			0x124
+#define QSERDES_V7_RX_RX_MODE_00_LOW				0x15c
+#define QSERDES_V7_RX_RX_MODE_00_HIGH				0x160
+#define QSERDES_V7_RX_RX_MODE_00_HIGH2				0x164
+#define QSERDES_V7_RX_RX_MODE_00_HIGH3				0x168
+#define QSERDES_V7_RX_RX_MODE_00_HIGH4				0x16c
+#define QSERDES_V7_RX_RX_MODE_01_LOW				0x170
+#define QSERDES_V7_RX_RX_MODE_01_HIGH				0x174
+#define QSERDES_V7_RX_RX_MODE_01_HIGH2				0x178
+#define QSERDES_V7_RX_RX_MODE_01_HIGH3				0x17c
+#define QSERDES_V7_RX_RX_MODE_01_HIGH4				0x180
+#define QSERDES_V7_RX_RX_MODE_10_LOW				0x184
+#define QSERDES_V7_RX_RX_MODE_10_HIGH				0x188
+#define QSERDES_V7_RX_RX_MODE_10_HIGH2				0x18c
+#define QSERDES_V7_RX_RX_MODE_10_HIGH3				0x190
+#define QSERDES_V7_RX_RX_MODE_10_HIGH4				0x194
+#define QSERDES_V7_RX_DFE_EN_TIMER				0x1a0
+#define QSERDES_V7_RX_DFE_CTLE_POST_CAL_OFFSET			0x1a4
+#define QSERDES_V7_RX_DCC_CTRL1					0x1a8
+#define QSERDES_V7_RX_VTH_CODE					0x1b0
+#define QSERDES_V7_RX_SIGDET_CAL_CTRL1				0x1e4
+#define QSERDES_V7_RX_SIGDET_CAL_TRIM				0x1f8
+
+#endif

drivers/phy/qualcomm/phy-qcom-qmp-ufs.c

@@ -763,22 +763,26 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = {
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14),
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f),
 	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06),
-	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x4c),
-	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a),
-	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18),
-	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14),
-	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x99),
-	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x99),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44),
 };
 
 static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = {
-	QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05),
 	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_FR_DCC_CTRL, 0x4c),
 };
 
 static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = {
-	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2, 0x0c),
-	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c),
 	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e),
 
 	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2),
@@ -801,6 +805,69 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = {
 	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
 	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b),
 	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04),
+};
+
+static const struct qmp_phy_init_tbl sm8650_ufsphy_serdes[] = {
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0xd9),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x99),
+	QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8650_ufsphy_tx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8650_ufsphy_rx[] = {
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1, 0xc2),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B6, 0x60),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE2_B3, 0x9e),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE2_B6, 0x60),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B3, 0x9e),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B4, 0x0e),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B5, 0x36),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B8, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B3, 0xb9),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B6, 0xff),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_SO_SATURATION, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_PI_CTRL1, 0x94),
+	QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_RX_TERM_BW_CTRL0, 0xfa),
+};
+
+static const struct qmp_phy_init_tbl sm8650_ufsphy_pcs[] = {
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PCS_CTRL1, 0xc1),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x69),
+	QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02),
 };
 
 struct qmp_ufs_offsets {
@@ -1296,6 +1363,32 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = {
 		.pcs		= sm8550_ufsphy_pcs,
 		.pcs_num	= ARRAY_SIZE(sm8550_ufsphy_pcs),
 	},
+	.tbls_hs_b = {
+		.serdes		= sm8550_ufsphy_hs_b_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes),
+	},
+	.clk_list		= sdm845_ufs_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= ufsphy_v6_regs_layout,
+};
+
+static const struct qmp_phy_cfg sm8650_ufsphy_cfg = {
+	.lanes			= 2,
+
+	.offsets		= &qmp_ufs_offsets_v6,
+
+	.tbls = {
+		.serdes		= sm8650_ufsphy_serdes,
+		.serdes_num	= ARRAY_SIZE(sm8650_ufsphy_serdes),
+		.tx		= sm8650_ufsphy_tx,
+		.tx_num		= ARRAY_SIZE(sm8650_ufsphy_tx),
+		.rx		= sm8650_ufsphy_rx,
+		.rx_num		= ARRAY_SIZE(sm8650_ufsphy_rx),
+		.pcs		= sm8650_ufsphy_pcs,
+		.pcs_num	= ARRAY_SIZE(sm8650_ufsphy_pcs),
+	},
 	.clk_list		= sdm845_ufs_phy_clk_l,
 	.num_clks		= ARRAY_SIZE(sdm845_ufs_phy_clk_l),
 	.vreg_list		= qmp_phy_vreg_l,
@@ -1826,6 +1919,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = {
 	}, {
 		.compatible = "qcom,sm8550-qmp-ufs-phy",
 		.data = &sm8550_ufsphy_cfg,
+	}, {
+		.compatible = "qcom,sm8650-qmp-ufs-phy",
+		.data = &sm8650_ufsphy_cfg,
 	},
 	{ },
 };

drivers/phy/qualcomm/phy-qcom-qmp.h

@@ -24,8 +24,12 @@
 #include "phy-qcom-qmp-qserdes-com-v6.h"
 #include "phy-qcom-qmp-qserdes-txrx-v6.h"
 #include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
+#include "phy-qcom-qmp-qserdes-txrx-v6_n4.h"
 #include "phy-qcom-qmp-qserdes-ln-shrd-v6.h"
 
+#include "phy-qcom-qmp-qserdes-com-v7.h"
+#include "phy-qcom-qmp-qserdes-txrx-v7.h"
+
 #include "phy-qcom-qmp-qserdes-pll.h"
 
 #include "phy-qcom-qmp-pcs-v2.h"
@@ -44,6 +48,8 @@
 
 #include "phy-qcom-qmp-pcs-v6_20.h"
 
+#include "phy-qcom-qmp-pcs-v7.h"
+
 /* Only for QMP V3 & V4 PHY - DP COM registers */
 #define QPHY_V3_DP_COM_PHY_MODE_CTRL			0x00
 #define QPHY_V3_DP_COM_SW_RESET				0x04

drivers/phy/renesas/Kconfig

@@ -13,7 +13,7 @@ config PHY_R8A779F0_ETHERNET_SERDES
 config PHY_RCAR_GEN2
 	tristate "Renesas R-Car generation 2 USB PHY driver"
 	depends on ARCH_RENESAS
-	depends on GENERIC_PHY
+	select GENERIC_PHY
 	help
 	  Support for USB PHY found on Renesas R-Car generation 2 SoCs.
 

drivers/phy/ti/phy-gmii-sel.c

@@ -248,7 +248,7 @@ static const
 struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw9g_soc_j784s4 = {
 	.use_of_data = true,
 	.regfields = phy_gmii_sel_fields_am654,
-	.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) |
+	.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) | BIT(PHY_INTERFACE_MODE_SGMII) |
 		       BIT(PHY_INTERFACE_MODE_USXGMII),
 	.num_ports = 8,
 	.num_qsgmii_main_ports = 2,

drivers/phy/ti/phy-j721e-wiz.c

@@ -1240,6 +1240,7 @@ static int wiz_phy_fullrt_div(struct wiz *wiz, int lane)
 	case J721E_WIZ_10G:
 	case J7200_WIZ_10G:
 	case J721S2_WIZ_10G:
+	case J784S4_WIZ_10G:
 		if (wiz->lane_phy_type[lane] == PHY_TYPE_SGMII)
 			return regmap_field_write(wiz->p0_fullrt_div[lane], 0x2);
 		break;