ARM: dts: imx6dl-yapp4: Configure the OLED display segment offset

The imx6dl-yapp4 platform uses a GE-LX012864FWPP3N0000 OLED display.
The display consist of a 128x64 OLED panel and a SSD1305 controller.

The OLED panel resolution is 128x64 but the built-in controller default
resolution is 132x64. To display properly a segment offset needs to be
configured.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx6dl-yapp4-common.dtsi

@@ -341,6 +341,7 @@ oled_1305: oled@3d {
 		solomon,height = <64>;
 		solomon,width = <128>;
 		solomon,page-offset = <0>;
+		solomon,col-offset = <4>;
 		solomon,prechargep2 = <15>;
 		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
 		vbat-supply = <&sw2_reg>;