Commit 3414f41a authored by Luca Weiss's avatar Luca Weiss Committed by Bjorn Andersson

clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents

Both gpll6 and gpll7 are parented to CXO at 19.2 MHz and not to GPLL0
which runs at 600 MHz. Also gpll6_out_even should have the parent gpll6
and not gpll0.

Adjust the parents of these clocks to make Linux report the correct rate
and not absurd numbers like gpll7 at ~25 GHz or gpll6 at 24 GHz.

Corrected rates are the following:

  gpll7              807999902 Hz
  gpll6              768000000 Hz
     gpll6_out_even  384000000 Hz
  gpll0              600000000 Hz
     gpll0_out_odd   200000000 Hz
     gpll0_out_even  300000000 Hz

And because gpll6 is the parent of gcc_sdcc2_apps_clk_src (at 202 MHz)
that clock also reports the correct rate now and avoids this warning:

  [    5.984062] mmc0: Card appears overclocked; req 202000000 Hz, actual 6312499237 Hz

Fixes: 131abae9 ("clk: qcom: Add SM6350 GCC driver")
Signed-off-by: default avatarLuca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240508-sm6350-gpll-fix-v1-1-e4ea34284a6d@fairphone.comSigned-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent 1613e604
......@@ -100,8 +100,8 @@ static struct clk_alpha_pll gpll6 = {
.enable_mask = BIT(6),
.hw.init = &(struct clk_init_data){
.name = "gpll6",
.parent_hws = (const struct clk_hw*[]){
&gpll0.clkr.hw,
.parent_data = &(const struct clk_parent_data){
.fw_name = "bi_tcxo",
},
.num_parents = 1,
.ops = &clk_alpha_pll_fixed_fabia_ops,
......@@ -124,7 +124,7 @@ static struct clk_alpha_pll_postdiv gpll6_out_even = {
.clkr.hw.init = &(struct clk_init_data){
.name = "gpll6_out_even",
.parent_hws = (const struct clk_hw*[]){
&gpll0.clkr.hw,
&gpll6.clkr.hw,
},
.num_parents = 1,
.ops = &clk_alpha_pll_postdiv_fabia_ops,
......@@ -139,8 +139,8 @@ static struct clk_alpha_pll gpll7 = {
.enable_mask = BIT(7),
.hw.init = &(struct clk_init_data){
.name = "gpll7",
.parent_hws = (const struct clk_hw*[]){
&gpll0.clkr.hw,
.parent_data = &(const struct clk_parent_data){
.fw_name = "bi_tcxo",
},
.num_parents = 1,
.ops = &clk_alpha_pll_fixed_fabia_ops,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment