Commit 344a2e51 authored by Srinath Mannam's avatar Srinath Mannam Committed by Florian Fainelli

arm64: dts: Add SATA DT nodes for Stingray SoC

Add DT nodes for SATA host controllers and SATA PHYs
on Stingray SoC
Signed-off-by: default avatarSrinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: default avatarRay Jui <ray.jui@broadcom.com>
Reviewed-by: default avatarScott Branden <scott.branden@broadcom.com>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
parent 80e2cbc1
...@@ -72,6 +72,70 @@ &memory { /* Default DRAM banks */ ...@@ -72,6 +72,70 @@ &memory { /* Default DRAM banks */
<0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */ <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
}; };
&sata0 {
status = "okay";
};
&sata_phy0{
status = "okay";
};
&sata1 {
status = "okay";
};
&sata_phy1{
status = "okay";
};
&sata2 {
status = "okay";
};
&sata_phy2{
status = "okay";
};
&sata3 {
status = "okay";
};
&sata_phy3{
status = "okay";
};
&sata4 {
status = "okay";
};
&sata_phy4{
status = "okay";
};
&sata5 {
status = "okay";
};
&sata_phy5{
status = "okay";
};
&sata6 {
status = "okay";
};
&sata_phy6{
status = "okay";
};
&sata7 {
status = "okay";
};
&sata_phy7{
status = "okay";
};
&mdio_mux_iproc { &mdio_mux_iproc {
mdio@10 { mdio@10 {
gphy0: eth-phy@10 { gphy0: eth-phy@10 {
......
/*
* BSD LICENSE
*
* Copyright(c) 2016-2017 Broadcom. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
sata {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x67d00000 0x00800000>;
sata0: ahci@00210000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00210000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata0_port0: sata-port@0 {
reg = <0>;
phys = <&sata0_phy0>;
phy-names = "sata-phy";
};
};
sata_phy0: sata_phy@00212100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00212100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata0_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata1: ahci@00310000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00310000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata1_port0: sata-port@0 {
reg = <0>;
phys = <&sata1_phy0>;
phy-names = "sata-phy";
};
};
sata_phy1: sata_phy@00312100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00312100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata1_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata2: ahci@00120000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00120000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata2_port0: sata-port@0 {
reg = <0>;
phys = <&sata2_phy0>;
phy-names = "sata-phy";
};
};
sata_phy2: sata_phy@00122100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00122100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata2_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata3: ahci@00130000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00130000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata3_port0: sata-port@0 {
reg = <0>;
phys = <&sata3_phy0>;
phy-names = "sata-phy";
};
};
sata_phy3: sata_phy@00132100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00132100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata3_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata4: ahci@00330000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00330000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata4_port0: sata-port@0 {
reg = <0>;
phys = <&sata4_phy0>;
phy-names = "sata-phy";
};
};
sata_phy4: sata_phy@00332100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00332100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata4_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata5: ahci@00400000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00400000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata5_port0: sata-port@0 {
reg = <0>;
phys = <&sata5_phy0>;
phy-names = "sata-phy";
};
};
sata_phy5: sata_phy@00402100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00402100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata5_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata6: ahci@00410000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00410000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata6_port0: sata-port@0 {
reg = <0>;
phys = <&sata6_phy0>;
phy-names = "sata-phy";
};
};
sata_phy6: sata_phy@00412100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00412100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata6_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
sata7: ahci@00420000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x00420000 0x1000>;
reg-names = "ahci";
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata7_port0: sata-port@0 {
reg = <0>;
phys = <&sata7_phy0>;
phy-names = "sata-phy";
};
};
sata_phy7: sata_phy@00422100 {
compatible = "brcm,iproc-sr-sata-phy";
reg = <0x00422100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
sata7_phy0: sata-phy@0 {
reg = <0>;
#phy-cells = <0>;
};
};
};
...@@ -267,6 +267,8 @@ gpio_crmu: gpio@00024800 { ...@@ -267,6 +267,8 @@ gpio_crmu: gpio@00024800 {
}; };
}; };
#include "stingray-sata.dtsi"
hsls { hsls {
compatible = "simple-bus"; compatible = "simple-bus";
#address-cells = <1>; #address-cells = <1>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment