Commit 34598503 authored by Gregory CLEMENT's avatar Gregory CLEMENT Committed by Andrew Lunn

ARM: mvebu: a38x: Add more pinctrl functions

With the Armada 385 GP board more pinctrl functions depending of the
SoC are needed. Add them to the DTSI to avoid duplication.
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
parent e5ee1281
...@@ -204,6 +204,14 @@ ge0_rgmii_pins: ge-rgmii-pins-0 { ...@@ -204,6 +204,14 @@ ge0_rgmii_pins: ge-rgmii-pins-0 {
marvell,function = "ge0"; marvell,function = "ge0";
}; };
ge1_rgmii_pins: ge-rgmii-pins-1 {
marvell,pins = "mpp21", "mpp27", "mpp28",
"mpp29", "mpp30", "mpp31",
"mpp32", "mpp37", "mpp38",
"mpp39", "mpp40", "mpp41";
marvell,function = "ge1";
};
i2c0_pins: i2c-pins-0 { i2c0_pins: i2c-pins-0 {
marvell,pins = "mpp2", "mpp3"; marvell,pins = "mpp2", "mpp3";
marvell,function = "i2c0"; marvell,function = "i2c0";
...@@ -219,6 +227,17 @@ ref_clk0_pins: ref-clk-pins-0 { ...@@ -219,6 +227,17 @@ ref_clk0_pins: ref-clk-pins-0 {
marvell,function = "ref"; marvell,function = "ref";
}; };
ref_clk1_pins: ref-clk-pins-1 {
marvell,pins = "mpp46";
marvell,function = "ref";
};
spi0_pins: spi-pins-0 {
marvell,pins = "mpp22", "mpp23", "mpp24",
"mpp25";
marvell,function = "spi0";
};
spi1_pins: spi-pins-1 { spi1_pins: spi-pins-1 {
marvell,pins = "mpp56", "mpp57", "mpp58", marvell,pins = "mpp56", "mpp57", "mpp58",
"mpp59"; "mpp59";
...@@ -234,6 +253,34 @@ uart1_pins: uart-pins-1 { ...@@ -234,6 +253,34 @@ uart1_pins: uart-pins-1 {
marvell,pins = "mpp19", "mpp20"; marvell,pins = "mpp19", "mpp20";
marvell,function = "ua1"; marvell,function = "ua1";
}; };
sdhci_pins: sdhci-pins {
marvell,pins = "mpp48", "mpp49", "mpp50",
"mpp52", "mpp53", "mpp54",
"mpp55", "mpp57", "mpp58",
"mpp59";
marvell,function = "sd0";
};
sata0_pins: sata-pins-0 {
marvell,pins = "mpp20";
marvell,function = "sata0";
};
sata1_pins: sata-pins-1 {
marvell,pins = "mpp19";
marvell,function = "sata1";
};
sata2_pins: sata-pins-2 {
marvell,pins = "mpp47";
marvell,function = "sata2";
};
sata3_pins: sata-pins-3 {
marvell,pins = "mpp44";
marvell,function = "sata3";
};
}; };
gpio0: gpio@18100 { gpio0: gpio@18100 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment