Skip to content

L
linux
Commit 355e5ce7 authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge tag 'omap-for-v4.8/dt-part2-signed' of... 

Merge tag 'omap-for-v4.8/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Second set of device tree updates for omaps for v4.8 merge window.
This is a series of dtc warning fixes when compiled with make W=2
from Javier Martinez Canillas <javier@osg.samsung.com>.

* tag 'omap-for-v4.8/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (27 commits)
  ARM: dts: am57xx: sbc-am57x: remove unneded unit name
  ARM: dts: omap5-board-common: remove unneded unit names
  ARM: dts: omap5-cm-t54: remove unneded unit names and add reg properties
  ARM: dts: am437x: cm-t43: remove unneded unit names
  ARM: dts: am437x-gp-evm: remove unneded unit name
  ARM: dts: am43xx-epos-evm: remove unneded unit name
  ARM: dts: omap4-var-om44customboard: remove unneded unit name
  ARM: dts: omap4-sdp: remove unneded unit names
  ARM: dts: omap4-panda-common: remove unneded unit names
  ARM: dts: omap4-duovero-parlor: remove unneded unit name
  ARM: dts: omap3-thunder: remove unneded unit name
  ARM: dts: sbc-t3x30: remove unneded unit names
  ARM: dts: omap3-pandora-common: remove unneded unit name
  ARM: dts: omap3-overo-common-dvi: remove unneded unit names
  ARM: dts: omap3-igep0020-common: remove unneded unit names
  ARM: dts: omap3: overo: remove unneded unit names in display nodes
  ARM: dts: omap3-ha-lcd: remove unneeded unit name
  ARM: dts: omap3-gta04: remove unneeded unit names
  ARM: dts: omap3-devkit8000-lcd-common: remove unneeded unit names
  ARM: dts: omap3-devkit8000: remove unneeded unit names
  ...
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents ab4b4340 480985b0
Hide whitespace changes
Inline Side-by-side
Showing with 80 additions and 75 deletions
arch/arm/boot/dts/am3517-craneboard.dts
View file @ 355e5ce7
......@@ -20,7 +20,7 @@ memory {
reg = <0x80000000 0x10000000>; /* 256 MB */
};
vbat: fixedregulator@0 {
vbat: fixedregulator {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
......
arch/arm/boot/dts/am437x-gp-evm.dts
View file @ 355e5ce7
......@@ -897,7 +897,7 @@ &dss {
pinctrl-0 = <&dss_pins>;
port {
dpi_out: endpoint@0 {
dpi_out: endpoint {
remote-endpoint = <&lcd_in>;
data-lines = <24>;
};
......
arch/arm/boot/dts/am437x-sbc-t43.dts
View file @ 355e5ce7
......@@ -145,7 +145,7 @@ &dss {
pinctrl-0 = <&dss_pinctrl_default>;
port {
dpi_lcd_out: endpoint@0 {
dpi_lcd_out: endpoint {
remote-endpoint = <&lcd_in>;
data-lines = <24>;
};
......
arch/arm/boot/dts/am43x-epos-evm.dts
View file @ 355e5ce7
......@@ -754,7 +754,7 @@ &dss {
pinctrl-0 = <&dss_pins>;
port {
dpi_out: endpoint@0 {
dpi_out: endpoint {
remote-endpoint = <&lcd_in>;
data-lines = <24>;
};
......
arch/arm/boot/dts/am57xx-sbc-am57x.dts
View file @ 355e5ce7
......@@ -128,7 +128,7 @@ &dss {
vdda_video-supply = <&ldoln_reg>;
port {
dpi_lcd_out: endpoint@0 {
dpi_lcd_out: endpoint {
remote-endpoint = <&lcd_in>;
data-lines = <24>;
};
......
arch/arm/boot/dts/compulab-sb-som.dtsi
View file @ 355e5ce7
......@@ -40,7 +40,7 @@ panel-timing {
};
};
hdmi_conn: connector@0 {
hdmi_conn: connector {
compatible = "hdmi-connector";
label = "hdmi";
......
arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
View file @ 355e5ce7
......@@ -72,7 +72,7 @@ led2 {
};
};
pwm10: dmtimer-pwm@10 {
pwm10: dmtimer-pwm {
compatible = "ti,omap-dmtimer-pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm_pins>;
......@@ -147,7 +147,7 @@ video_reg: video_reg {
gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
};
lcd0: display@0 {
lcd0: display {
compatible = "panel-dpi";
label = "15";
status = "okay";
......
arch/arm/boot/dts/omap24xx-clocks.dtsi
View file @ 355e5ce7
......@@ -164,7 +164,7 @@ core_ck: core_ck {
clock-div = <1>;
};
func_96m_ck: func_96m_ck {
func_96m_ck: func_96m_ck@540 {
#clock-cells = <0>;
};
......
arch/arm/boot/dts/omap3-beagle-xm.dts
View file @ 355e5ce7
......@@ -91,7 +91,7 @@ hsusb2_phy: hsusb2_phy {
vcc-supply = <&hsusb2_power>;
};
tfp410: encoder@0 {
tfp410: encoder0 {
compatible = "ti,tfp410";
powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
......@@ -104,7 +104,7 @@ ports {
port@0 {
reg = <0>;
tfp410_in: endpoint@0 {
tfp410_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
......@@ -112,14 +112,14 @@ tfp410_in: endpoint@0 {
port@1 {
reg = <1>;
tfp410_out: endpoint@0 {
tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
dvi0: connector@0 {
dvi0: connector0 {
compatible = "dvi-connector";
label = "dvi";
......@@ -134,7 +134,7 @@ dvi_connector_in: endpoint {
};
};
tv0: connector@1 {
tv0: connector1 {
compatible = "svideo-connector";
label = "tv";
......
arch/arm/boot/dts/omap3-beagle.dts
View file @ 355e5ce7
......@@ -85,7 +85,7 @@ user {
};
tfp410: encoder@0 {
tfp410: encoder0 {
compatible = "ti,tfp410";
powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
......@@ -99,7 +99,7 @@ ports {
port@0 {
reg = <0>;
tfp410_in: endpoint@0 {
tfp410_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
......@@ -107,14 +107,14 @@ tfp410_in: endpoint@0 {
port@1 {
reg = <1>;
tfp410_out: endpoint@0 {
tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
dvi0: connector@0 {
dvi0: connector0 {
compatible = "dvi-connector";
label = "dvi";
......@@ -129,7 +129,7 @@ dvi_connector_in: endpoint {
};
};
tv0: connector@1 {
tv0: connector1 {
compatible = "svideo-connector";
label = "tv";
......
arch/arm/boot/dts/omap3-cm-t3x.dtsi
View file @ 355e5ce7
......@@ -57,7 +57,7 @@ ads7846reg: ads7846-reg {
regulator-max-microvolt = <3300000>;
};
tv0: connector@1 {
tv0: connector {
compatible = "svideo-connector";
label = "tv";
......
arch/arm/boot/dts/omap3-devkit8000-common.dtsi
View file @ 355e5ce7
......@@ -68,7 +68,7 @@ user {
};
};
tfp410: encoder@0 {
tfp410: encoder0 {
compatible = "ti,tfp410";
powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
......@@ -79,7 +79,7 @@ ports {
port@0 {
reg = <0>;
tfp410_in: endpoint@0 {
tfp410_in: endpoint {
remote-endpoint = <&dpi_dvi_out>;
};
};
......@@ -87,14 +87,14 @@ tfp410_in: endpoint@0 {
port@1 {
reg = <1>;
tfp410_out: endpoint@0 {
tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
dvi0: connector@0 {
dvi0: connector0 {
compatible = "dvi-connector";
label = "dvi";
......@@ -109,7 +109,7 @@ dvi_connector_in: endpoint {
};
};
tv0: connector@1 {
tv0: connector1 {
compatible = "svideo-connector";
label = "tv";
......@@ -352,7 +352,7 @@ &dss {
vdda_dac-supply = <&vdac>;
port {
dpi_dvi_out: endpoint@0 {
dpi_dvi_out: endpoint {
remote-endpoint = <&tfp410_in>;
data-lines = <24>;
};
......
arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
View file @ 355e5ce7
......@@ -14,7 +14,7 @@ aliases {
display2 = &tv0;
};
lcd0: display@0 {
lcd0: display {
compatible = "panel-dpi";
label = "lcd";
......@@ -30,7 +30,7 @@ lcd_in: endpoint {
&dss {
port {
dpi_lcd_out: endpoint@1 {
dpi_lcd_out: endpoint {
remote-endpoint = <&lcd_in>;
data-lines = <24>;
};
......
arch/arm/boot/dts/omap3-devkit8000-lcd43.dts
View file @ 355e5ce7
......@@ -16,7 +16,7 @@ / {
model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel";
compatible = "timll,omap3-devkit8000", "ti,omap3";
lcd0: display@0 {
lcd0: display {
panel-timing {
clock-frequency = <10164705>;
hactive = <480>;
......
arch/arm/boot/dts/omap3-devkit8000-lcd70.dts
View file @ 355e5ce7
......@@ -16,7 +16,7 @@ / {
model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel";
compatible = "timll,omap3-devkit8000", "ti,omap3";
lcd0: display@0 {
lcd0: display {
panel-timing {
clock-frequency = <40000000>;
hactive = <800>;
......
arch/arm/boot/dts/omap3-gta04.dtsi
View file @ 355e5ce7
......@@ -110,7 +110,7 @@ backlight {
pinctrl-0 = <&backlight_pins>;
};
pwm11: dmtimer-pwm@11 {
pwm11: dmtimer-pwm {
compatible = "ti,omap-dmtimer-pwm";
ti,timers = <&timer11>;
#pwm-cells = <3>;
......@@ -121,7 +121,7 @@ hsusb2_phy: hsusb2_phy {
reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
};
tv0: connector@1 {
tv0: connector {
compatible = "svideo-connector";
label = "tv";
......@@ -142,14 +142,14 @@ ports {
port@0 {
reg = <0>;
opa_in: endpoint@0 {
opa_in: endpoint {
remote-endpoint = <&venc_out>;
};
};
port@1 {
reg = <1>;
opa_out: endpoint@0 {
opa_out: endpoint {
remote-endpoint = <&tv_connector_in>;
};
};
......
arch/arm/boot/dts/omap3-ha-lcd.dts
View file @ 355e5ce7
......@@ -121,7 +121,7 @@ aliases {
display0 = &lcd0;
};
lcd0: display@0 {
lcd0: display {
compatible = "panel-dpi";
label = "lcd";
......
arch/arm/boot/dts/omap3-igep0020-common.dtsi
View file @ 355e5ce7
......@@ -60,7 +60,7 @@ hsusb1_phy: hsusb1_phy {
vcc-supply = <&hsusb1_power>;
};
tfp410: encoder@0 {
tfp410: encoder {
compatible = "ti,tfp410";
powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
......@@ -71,7 +71,7 @@ ports {
port@0 {
reg = <0>;
tfp410_in: endpoint@0 {
tfp410_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
......@@ -79,14 +79,14 @@ tfp410_in: endpoint@0 {
port@1 {
reg = <1>;
tfp410_out: endpoint@0 {
tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
dvi0: connector@0 {
dvi0: connector {
compatible = "dvi-connector";
label = "dvi";
......
arch/arm/boot/dts/omap3-n900.dts
View file @ 355e5ce7
......@@ -144,7 +144,7 @@ battery: n900-battery {
io-channel-names = "temp", "bsi", "vbat";
};
pwm9: dmtimer-pwm@9 {
pwm9: dmtimer-pwm {
compatible = "ti,omap-dmtimer-pwm";
#pwm-cells = <3>;
ti,timers = <&timer9>;
......
arch/arm/boot/dts/omap3-overo-common-dvi.dtsi
View file @ 355e5ce7
......@@ -69,7 +69,7 @@ aliases {
display0 = &dvi0;
};
tfp410: encoder@0 {
tfp410: encoder {
compatible = "ti,tfp410";
ports {
......@@ -79,7 +79,7 @@ ports {
port@0 {
reg = <0>;
tfp410_in: endpoint@0 {
tfp410_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
......@@ -87,14 +87,14 @@ tfp410_in: endpoint@0 {
port@1 {
reg = <1>;
tfp410_out: endpoint@0 {
tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
dvi0: connector@0 {
dvi0: connector {
compatible = "dvi-connector";
label = "dvi";
......
arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
View file @ 355e5ce7
......@@ -119,7 +119,7 @@ &mcspi1 {
pinctrl-names = "default";
pinctrl-0 = <&mcspi1_pins>;
lcd0: display@0 {
lcd0: display {
compatible = "lgphilips,lb035q02";
label = "lcd35";
......
arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
View file @ 355e5ce7
......@@ -96,7 +96,7 @@ aliases {
display0 = &lcd0;
};
lcd0: display@0 {
lcd0: display {
compatible = "samsung,lte430wq-f0c", "panel-dpi";
label = "lcd43";
......
arch/arm/boot/dts/omap3-pandora-common.dtsi
View file @ 355e5ce7
......@@ -27,7 +27,7 @@ aliases {
display0 = &lcd;
};
tv: connector@1 {
tv: connector {
compatible = "connector-analog-tv";
label = "tv";
......
arch/arm/boot/dts/omap3-sb-t35.dtsi
View file @ 355e5ce7
......@@ -3,7 +3,7 @@
*/
/ {
tfp410: encoder@0 {
tfp410: encoder {
compatible = "ti,tfp410";
powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */
......@@ -18,7 +18,7 @@ ports {
port@0 {
reg = <0>;
tfp410_in: endpoint@0 {
tfp410_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
......@@ -26,14 +26,14 @@ tfp410_in: endpoint@0 {
port@1 {
reg = <1>;
tfp410_out: endpoint@0 {
tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
dvi0: connector@0 {
dvi0: connector {
compatible = "dvi-connector";
label = "dvi";
......
arch/arm/boot/dts/omap3-thunder.dts
View file @ 355e5ce7
......@@ -85,7 +85,7 @@ aliases {
display0 = &lcd0;
};
lcd0: display@0 {
lcd0: display {
compatible = "samsung,lte430wq-f0c", "panel-dpi";
label = "lcd";
......
arch/arm/boot/dts/omap4-duovero-parlor.dts
View file @ 355e5ce7
......@@ -40,7 +40,7 @@ button0@121 {
};
};
hdmi0: connector@0 {
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
......
arch/arm/boot/dts/omap4-panda-common.dtsi
View file @ 355e5ce7
......@@ -103,7 +103,7 @@ wl12xx_vmmc: wl12xx_vmmc {
enable-active-high;
};
tfp410: encoder@0 {
tfp410: encoder0 {
compatible = "ti,tfp410";
powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */
......@@ -114,7 +114,7 @@ ports {
port@0 {
reg = <0>;
tfp410_in: endpoint@0 {
tfp410_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
......@@ -122,14 +122,14 @@ tfp410_in: endpoint@0 {
port@1 {
reg = <1>;
tfp410_out: endpoint@0 {
tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
dvi0: connector@0 {
dvi0: connector0 {
compatible = "dvi-connector";
label = "dvi";
......@@ -144,7 +144,7 @@ dvi_connector_in: endpoint {
};
};
tpd12s015: encoder@1 {
tpd12s015: encoder1 {
compatible = "ti,tpd12s015";
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
......@@ -158,7 +158,7 @@ ports {
port@0 {
reg = <0>;
tpd12s015_in: endpoint@0 {
tpd12s015_in: endpoint {
remote-endpoint = <&hdmi_out>;
};
};
......@@ -166,14 +166,14 @@ tpd12s015_in: endpoint@0 {
port@1 {
reg = <1>;
tpd12s015_out: endpoint@0 {
tpd12s015_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
hdmi0: connector@1 {
hdmi0: connector1 {
compatible = "hdmi-connector";
label = "hdmi";
......
arch/arm/boot/dts/omap4-sdp.dts
View file @ 355e5ce7
......@@ -160,7 +160,7 @@ wl12xx_vmmc: wl12xx_vmmc {
enable-active-high;
};
tpd12s015: encoder@0 {
tpd12s015: encoder {
compatible = "ti,tpd12s015";
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
......@@ -174,7 +174,7 @@ ports {
port@0 {
reg = <0>;
tpd12s015_in: endpoint@0 {
tpd12s015_in: endpoint {
remote-endpoint = <&hdmi_out>;
};
};
......@@ -182,14 +182,14 @@ tpd12s015_in: endpoint@0 {
port@1 {
reg = <1>;
tpd12s015_out: endpoint@0 {
tpd12s015_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
hdmi0: connector@0 {
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
......
arch/arm/boot/dts/omap4-var-om44customboard.dtsi
View file @ 355e5ce7
......@@ -45,7 +45,7 @@ user-key@184 {
};
};
hdmi0: connector@0 {
hdmi0: connector {
compatible = "hdmi-connector";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_pins>;
......
arch/arm/boot/dts/omap5-board-common.dtsi
View file @ 355e5ce7
......@@ -64,7 +64,7 @@ led@1 {
};
};
tpd12s015: encoder@0 {
tpd12s015: encoder {
compatible = "ti,tpd12s015";
pinctrl-names = "default";
......@@ -79,7 +79,7 @@ ports {
port@0 {
reg = <0>;
tpd12s015_in: endpoint@0 {
tpd12s015_in: endpoint {
remote-endpoint = <&hdmi_out>;
};
};
......@@ -87,14 +87,14 @@ tpd12s015_in: endpoint@0 {
port@1 {
reg = <1>;
tpd12s015_out: endpoint@0 {
tpd12s015_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
hdmi0: connector@0 {
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
......
arch/arm/boot/dts/omap5-cm-t54.dts
View file @ 355e5ce7
......@@ -112,7 +112,7 @@ lcd_in: endpoint {
};
};
hdmi0: connector@0 {
hdmi0: connector0 {
compatible = "hdmi-connector";
label = "hdmi";
......@@ -130,7 +130,7 @@ hdmi_connector_in: endpoint {
};
};
tfp410: encoder@0 {
tfp410: encoder0 {
compatible = "ti,tfp410";
ports {
......@@ -140,7 +140,7 @@ ports {
port@0 {
reg = <0>;
tfp410_in: endpoint@0 {
tfp410_in: endpoint {
remote-endpoint = <&dpi_dvi_out>;
};
};
......@@ -148,14 +148,14 @@ tfp410_in: endpoint@0 {
port@1 {
reg = <1>;
tfp410_out: endpoint@0 {
tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
dvi0: connector@1 {
dvi0: connector1 {
compatible = "dvi-connector";
label = "dvi";
......@@ -646,12 +646,17 @@ &dss {
pinctrl-0 = <&dss_dpi_pins>;
port {
#address-cells = <1>;
#size-cells = <0>;
dpi_dvi_out: endpoint@0 {
reg = <0>;
remote-endpoint = <&tfp410_in>;
data-lines = <24>;
};
dpi_lcd_out: endpoint@1 {
reg = <1>;
remote-endpoint = <&lcd_in>;
data-lines = <24>;
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7