ASoC: qdsp6: Suggest more generic node names

Change the listed examples to use more generic node names, representing
the class of the device nodes:

  - apr-service@<id>
  - dai@<id>

Both names are already in use in arch/arm64/boot/dts/qcom/sdm845.dtsi.

Also add #address-cells + #size-cells to the q6asm example,
without them the example produces dtc warnings.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200415081159.1098-1-stephan@gerhold.netSigned-off-by: Mark Brown <broonie@kernel.org>

Documentation/devicetree/bindings/sound/qcom,q6adm.txt

@@ -29,7 +29,7 @@ used by the apr service device.
 	Definition: Must be 0
 
 = EXAMPLE
-q6adm@8 {
+apr-service@8 {
 	compatible = "qcom,q6adm";
 	reg = <APR_SVC_ADM>;
 	q6routing: routing {

Documentation/devicetree/bindings/sound/qcom,q6afe.txt

@@ -100,7 +100,7 @@ configuration of each dai. Must contain the following properties.
 
 = EXAMPLE
 
-q6afe@4 {
+apr-service@4 {
 	compatible = "qcom,q6afe";
 	reg = <APR_SVC_AFE>;
 
@@ -110,12 +110,12 @@ q6afe@4 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		hdmi@1 {
-			reg = <1>;
+		dai@1 {
+			reg = <HDMI_RX>;
 		};
 
-		tdm@24 {
-			reg = <24>;
+		dai@24 {
+			reg = <PRIMARY_TDM_RX_0>;
 			qcom,tdm-sync-mode = <1>:
 			qcom,tdm-sync-src = <1>;
 			qcom,tdm-data-out = <0>;
@@ -125,8 +125,8 @@ q6afe@4 {
 
 		};
 
-		tdm@25 {
-			reg = <25>;
+		dai@25 {
+			reg = <PRIMARY_TDM_TX_0>;
 			qcom,tdm-sync-mode = <1>:
 			qcom,tdm-sync-src = <1>;
 			qcom,tdm-data-out = <0>;
@@ -135,43 +135,43 @@ q6afe@4 {
 			qcom,tdm-data-align = <0>;
 		};
 
-		prim-mi2s-rx@16 {
-			reg = <16>;
+		dai@16 {
+			reg = <PRIMARY_MI2S_RX>;
 			qcom,sd-lines = <0 2>;
 		};
 
-		prim-mi2s-tx@17 {
-			reg = <17>;
+		dai@17 {
+			reg = <PRIMARY_MI2S_TX>;
 			qcom,sd-lines = <1>;
 		};
 
-		sec-mi2s-rx@18 {
-			reg = <18>;
+		dai@18 {
+			reg = <SECONDARY_MI2S_RX>;
 			qcom,sd-lines = <0 3>;
 		};
 
-		sec-mi2s-tx@19 {
-			reg = <19>;
+		dai@19 {
+			reg = <SECONDARY_MI2S_TX>;
 			qcom,sd-lines = <1>;
 		};
 
-		tert-mi2s-rx@20 {
-			reg = <20>;
+		dai@20 {
+			reg = <TERTIARY_MI2S_RX>;
 			qcom,sd-lines = <1 3>;
 		};
 
-		tert-mi2s-tx@21 {
-			reg = <21>;
+		dai@21 {
+			reg = <TERTIARY_MI2S_TX>;
 			qcom,sd-lines = <0>;
 		};
 
-		quat-mi2s-rx@22 {
-			reg = <22>;
+		dai@22 {
+			reg = <QUATERNARY_MI2S_RX>;
 			qcom,sd-lines = <0>;
 		};
 
-		quat-mi2s-tx@23 {
-			reg = <23>;
+		dai@23 {
+			reg = <QUATERNARY_MI2S_TX>;
 			qcom,sd-lines = <1>;
 		};
 	};

Documentation/devicetree/bindings/sound/qcom,q6asm.txt

@@ -51,13 +51,16 @@ configuration of each dai. Must contain the following properties.
 
 = EXAMPLE
 
-q6asm@7 {
+apr-service@7 {
 	compatible = "qcom,q6asm";
 	reg = <APR_SVC_ASM>;
 	q6asmdai: dais {
 		compatible = "qcom,q6asm-dais";
+		#address-cells = <1>;
+		#size-cells = <0>;
 		#sound-dai-cells = <1>;
-		mm@0 {
+
+		dai@0 {
 			reg = <0>;
 			direction = <2>;
 			is-compress-dai;

Documentation/devicetree/bindings/sound/qcom,q6core.txt

@@ -15,7 +15,7 @@ used by the apr service device.
 		   example "qcom,q6core-v2.0"
 
 = EXAMPLE
-q6core@3 {
+apr-service@3 {
 	compatible = "qcom,q6core";
 	reg = <APR_SVC_ADSP_CORE>;
 };