Commit 367c820e authored by Sumit Garg's avatar Sumit Garg Committed by Will Deacon

arm64: Enable perf events based hard lockup detector

With the recent feature added to enable perf events to use pseudo NMIs
as interrupts on platforms which support GICv3 or later, its now been
possible to enable hard lockup detector (or NMI watchdog) on arm64
platforms. So enable corresponding support.

One thing to note here is that normally lockup detector is initialized
just after the early initcalls but PMU on arm64 comes up much later as
device_initcall(). So we need to re-initialize lockup detection once
PMU has been initialized.
Signed-off-by: default avatarSumit Garg <sumit.garg@linaro.org>
Acked-by: default avatarAlexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/1602060704-10921-1-git-send-email-sumit.garg@linaro.orgSigned-off-by: default avatarWill Deacon <will@kernel.org>
parent 6b46338f
......@@ -170,6 +170,8 @@ config ARM64
select HAVE_NMI
select HAVE_PATA_PLATFORM
select HAVE_PERF_EVENTS
select HAVE_PERF_EVENTS_NMI if ARM64_PSEUDO_NMI
select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && HAVE_PERF_EVENTS_NMI
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
select HAVE_REGS_AND_STACK_ACCESS_API
......
......@@ -23,6 +23,8 @@
#include <linux/platform_device.h>
#include <linux/sched_clock.h>
#include <linux/smp.h>
#include <linux/nmi.h>
#include <linux/cpufreq.h>
/* ARMv8 Cortex-A53 specific event types. */
#define ARMV8_A53_PERFCTR_PREF_LINEFILL 0xC2
......@@ -1248,10 +1250,21 @@ static struct platform_driver armv8_pmu_driver = {
static int __init armv8_pmu_driver_init(void)
{
int ret;
if (acpi_disabled)
return platform_driver_register(&armv8_pmu_driver);
ret = platform_driver_register(&armv8_pmu_driver);
else
return arm_pmu_acpi_probe(armv8_pmuv3_init);
ret = arm_pmu_acpi_probe(armv8_pmuv3_init);
/*
* Try to re-initialize lockup detector after PMU init in
* case PMU events are triggered via NMIs.
*/
if (ret == 0 && arm_pmu_irq_is_nmi())
lockup_detector_init();
return ret;
}
device_initcall(armv8_pmu_driver_init)
......@@ -1309,3 +1322,27 @@ void arch_perf_update_userpage(struct perf_event *event,
userpg->cap_user_time_zero = 1;
userpg->cap_user_time_short = 1;
}
#ifdef CONFIG_HARDLOCKUP_DETECTOR_PERF
/*
* Safe maximum CPU frequency in case a particular platform doesn't implement
* cpufreq driver. Although, architecture doesn't put any restrictions on
* maximum frequency but 5 GHz seems to be safe maximum given the available
* Arm CPUs in the market which are clocked much less than 5 GHz. On the other
* hand, we can't make it much higher as it would lead to a large hard-lockup
* detection timeout on parts which are running slower (eg. 1GHz on
* Developerbox) and doesn't possess a cpufreq driver.
*/
#define SAFE_MAX_CPU_FREQ 5000000000UL // 5 GHz
u64 hw_nmi_get_sample_period(int watchdog_thresh)
{
unsigned int cpu = smp_processor_id();
unsigned long max_cpu_freq;
max_cpu_freq = cpufreq_get_hw_max_freq(cpu) * 1000UL;
if (!max_cpu_freq)
max_cpu_freq = SAFE_MAX_CPU_FREQ;
return (u64)max_cpu_freq * watchdog_thresh;
}
#endif
......@@ -726,6 +726,11 @@ static int armpmu_get_cpu_irq(struct arm_pmu *pmu, int cpu)
return per_cpu(hw_events->irq, cpu);
}
bool arm_pmu_irq_is_nmi(void)
{
return has_nmi;
}
/*
* PMU hardware loses all context when a CPU goes offline.
* When a CPU is hotplugged back in, since some hardware registers are
......
......@@ -163,6 +163,8 @@ int arm_pmu_acpi_probe(armpmu_init_fn init_fn);
static inline int arm_pmu_acpi_probe(armpmu_init_fn init_fn) { return 0; }
#endif
bool arm_pmu_irq_is_nmi(void);
/* Internal functions only for core arm_pmu code */
struct arm_pmu *armpmu_alloc(void);
struct arm_pmu *armpmu_alloc_atomic(void);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment