Merge series "ASoC: codecs: add support for LPASS Codec macros" from Srinivas...

Merge series "ASoC: codecs: add support for LPASS Codec macros" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>:

This patchset adds support for two Codec Macro blocks( WSA and VA) available in
Qualcomm LPASS (Low Power Audio SubSystem).

There are WSA, VA, TX and RX Macros on LPASS IP, each of the Macro block
has specific connectivity like WSA Macros are intended to connect
to WSA Smart speaker codecs via SoundWire. VA Macro is intended for DMICs,
and TX/RX for Analog codecs via SoundWire like other WCD Codecs to provide
headphone/ear/lineout etc ..

Most of the work is derived from downstream Qualcomm kernels.
Credits to various Qualcomm authors from Patrick Lai's team who have
contributed to this code.

This patchset has been tested on support to Qualcomm Robotics RB5 Development
Kit based on QRB5165 Robotics SoC. This board has 2 WSA881X smart speakers
with onboard DMIC connected to internal LPASS codec via WSA  and VA macros
respectively.

Thanks,
srini

-Changes since v2:
 - various unnecessary variable intializations removed, suggested by Pierre
 - fixed a static checker error
 - collected reviews for dt-bindings.
 - fixed licence headers as suggested by Pierre.

Srinivas Kandagatla (6):
  ASoC: qcom: dt-bindings: add bindings for lpass wsa macro codec
  ASoC: codecs: lpass-wsa-macro: Add support to WSA Macro
  ASoC: codecs: lpass-wsa-macro: add dapm widgets and route
  ASoC: qcom: dt-bindings: add bindings for lpass va macro codec
  ASoC: codecs: lpass-va-macro: Add support to VA Macro
  ASoC: codecs: lpass-va-macro: add dapm widgets and routes

 .../bindings/sound/qcom,lpass-va-macro.yaml   |   67 +
 .../bindings/sound/qcom,lpass-wsa-macro.yaml  |   69 +
 sound/soc/codecs/Kconfig                      |    8 +
 sound/soc/codecs/Makefile                     |    4 +
 sound/soc/codecs/lpass-va-macro.c             | 1503 ++++++++++
 sound/soc/codecs/lpass-wsa-macro.c            | 2464 +++++++++++++++++
 sound/soc/codecs/lpass-wsa-macro.h            |   17 +
 7 files changed, 4132 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml
 create mode 100644 sound/soc/codecs/lpass-va-macro.c
 create mode 100644 sound/soc/codecs/lpass-wsa-macro.c
 create mode 100644 sound/soc/codecs/lpass-wsa-macro.h

--
2.21.0

Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-va-macro.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPASS(Low Power Audio Subsystem) VA Macro audio codec DT bindings
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+  compatible:
+    const: qcom,sm8250-lpass-va-macro
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: mclk
+      - const: core
+      - const: dcodec
+
+  clock-output-names:
+    items:
+      - const: fsgen
+
+  qcom,dmic-sample-rate:
+    description: dmic sample rate
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  vdd-micb-supply:
+    description: phandle to voltage regulator of MIC Bias
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    codec@3370000 {
+      compatible = "qcom,sm8250-lpass-va-macro";
+      reg = <0x3370000 0x1000>;
+      #sound-dai-cells = <1>;
+      #clock-cells = <0>;
+      clocks = <&aoncc 0>,
+               <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+      clock-names = "mclk", "core", "dcodec";
+      clock-output-names = "fsgen";
+      qcom,dmic-sample-rate = <600000>;
+      vdd-micb-supply = <&vreg_s4a_1p8>;
+    };

Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,lpass-wsa-macro.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPASS(Low Power Audio Subsystem) VA Macro audio codec DT bindings
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+properties:
+  compatible:
+    const: qcom,sm8250-lpass-wsa-macro
+
+  reg:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 1
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: mclk
+      - const: npl
+      - const: macro
+      - const: dcodec
+      - const: fsgen
+
+  clock-output-names:
+    items:
+      - const: mclk
+
+  qcom,dmic-sample-rate:
+    description: dmic sample rate
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  vdd-micb-supply:
+    description: phandle to voltage regulator of MIC Bias
+
+required:
+  - compatible
+  - reg
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    codec@3240000 {
+      compatible = "qcom,sm8250-lpass-wsa-macro";
+      reg = <0x3240000 0x1000>;
+      #sound-dai-cells = <1>;
+      #clock-cells = <0>;
+      clocks = <&audiocc 1>,
+               <&audiocc 0>,
+               <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&vamacro>;
+      clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+      clock-output-names = "mclk";
+    };

sound/soc/codecs/Kconfig

@@ -1789,4 +1789,12 @@ config SND_SOC_TPA6130A2
 	tristate "Texas Instruments TPA6130A2 headphone amplifier"
 	depends on I2C
 
+config SND_SOC_LPASS_WSA_MACRO
+	depends on COMMON_CLK
+	tristate "Qualcomm WSA Macro in LPASS(Low Power Audio SubSystem)"
+
+config SND_SOC_LPASS_VA_MACRO
+	depends on COMMON_CLK
+	tristate "Qualcomm VA Macro in LPASS(Low Power Audio SubSystem)"
+
 endmenu

sound/soc/codecs/Makefile

@@ -103,6 +103,8 @@ snd-soc-l3-objs := l3.o
 snd-soc-lm4857-objs := lm4857.o
 snd-soc-lm49453-objs := lm49453.o
 snd-soc-lochnagar-sc-objs := lochnagar-sc.o
+snd-soc-lpass-wsa-macro-objs := lpass-wsa-macro.o
+snd-soc-lpass-va-macro-objs := lpass-va-macro.o
 snd-soc-madera-objs := madera.o
 snd-soc-max9759-objs := max9759.o
 snd-soc-max9768-objs := max9768.o
@@ -615,3 +617,5 @@ obj-$(CONFIG_SND_SOC_MAX9877)	+= snd-soc-max9877.o
 obj-$(CONFIG_SND_SOC_MAX98504)	+= snd-soc-max98504.o
 obj-$(CONFIG_SND_SOC_SIMPLE_AMPLIFIER)	+= snd-soc-simple-amplifier.o
 obj-$(CONFIG_SND_SOC_TPA6130A2)	+= snd-soc-tpa6130a2.o
+obj-$(CONFIG_SND_SOC_LPASS_WSA_MACRO)	+= snd-soc-lpass-wsa-macro.o
+obj-$(CONFIG_SND_SOC_LPASS_VA_MACRO)	+= snd-soc-lpass-va-macro.o

sound/soc/codecs/lpass-wsa-macro.h

+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __LPASS_WSA_MACRO_H__
+#define __LPASS_WSA_MACRO_H__
+
+/*
+ * Selects compander and smart boost settings
+ * for a given speaker mode
+ */
+enum {
+	WSA_MACRO_SPKR_MODE_DEFAULT,
+	WSA_MACRO_SPKR_MODE_1, /* COMP Gain = 12dB, Smartboost Max = 5.5V */
+};
+
+int wsa_macro_set_spkr_mode(struct snd_soc_component *component, int mode);
+
+#endif /* __LPASS_WSA_MACRO_H__ */