staging: lustre: headers: move swab functions to new header files

Create headers for pack_generic.c and llog_swab.c
Reference only where needed. This separates out
the kernel only code from lustre_idl.h that is
an UAPI header.
Signed-off-by: Ben Evans <bevans@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6401
Reviewed-on: http://review.whamcloud.com/16339Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/lustre/lustre/include/llog_swab.h

+/*
+ * GPL HEADER START
+ *
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 only,
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License version 2 for more details (a copy is included
+ * in the LICENSE file that accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 along with this program; If not, see
+ * http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * GPL HEADER END
+ */
+/*
+ * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
+ * Use is subject to license terms.
+ *
+ * Copyright (c) 2011, 2014, Intel Corporation.
+ *
+ * Copyright 2015 Cray Inc, all rights reserved.
+ * Author: Ben Evans.
+ *
+ * We assume all nodes are either little-endian or big-endian, and we
+ * always send messages in the sender's native format.  The receiver
+ * detects the message format by checking the 'magic' field of the message
+ * (see lustre_msg_swabbed() below).
+ *
+ * Each type has corresponding 'lustre_swab_xxxtypexxx()' routines
+ * are implemented in ptlrpc/pack_generic.c.  These 'swabbers' convert the
+ * type from "other" endian, in-place in the message buffer.
+ *
+ * A swabber takes a single pointer argument.  The caller must already have
+ * verified that the length of the message buffer >= sizeof (type).
+ *
+ * For variable length types, a second 'lustre_swab_v_xxxtypexxx()' routine
+ * may be defined that swabs just the variable part, after the caller has
+ * verified that the message buffer is large enough.
+ */
+
+#ifndef _LLOG_SWAB_H_
+#define _LLOG_SWAB_H_
+
+#include "lustre/lustre_idl.h"
+struct lustre_cfg;
+
+void lustre_swab_lu_fid(struct lu_fid *fid);
+void lustre_swab_ost_id(struct ost_id *oid);
+void lustre_swab_llogd_body(struct llogd_body *d);
+void lustre_swab_llog_hdr(struct llog_log_hdr *h);
+void lustre_swab_llogd_conn_body(struct llogd_conn_body *d);
+void lustre_swab_llog_rec(struct llog_rec_hdr *rec);
+void lustre_swab_lu_seq_range(struct lu_seq_range *range);
+void lustre_swab_lustre_cfg(struct lustre_cfg *lcfg);
+void lustre_swab_cfg_marker(struct cfg_marker *marker,
+			    int swab, int size);
+
+#endif

drivers/staging/lustre/lustre/include/lprocfs_status.h

@@ -43,6 +43,8 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
+#include "../../include/linux/libcfs/libcfs.h"
+#include "lustre_cfg.h"
 #include "lustre/lustre_idl.h"
 
 struct lprocfs_vars {

drivers/staging/lustre/lustre/include/lustre/lustre_user.h

@@ -457,8 +457,6 @@ static inline int lmv_user_md_size(int stripes, int lmm_magic)
 		      stripes * sizeof(struct lmv_user_mds_data);
 }
 
-void lustre_swab_lmv_user_md(struct lmv_user_md *lum);
-
 struct ll_recreate_obj {
 	__u64 lrc_id;
 	__u32 lrc_ost_idx;

drivers/staging/lustre/lustre/include/lustre_sec.h

@@ -50,6 +50,7 @@ struct brw_page;
 /* Linux specific */
 struct key;
 struct seq_file;
+struct lustre_cfg;
 
 /*
  * forward declaration

drivers/staging/lustre/lustre/include/lustre_swab.h

+/*
+ * GPL HEADER START
+ *
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 only,
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License version 2 for more details (a copy is included
+ * in the LICENSE file that accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License
+ * version 2 along with this program; If not, see
+ * http://www.gnu.org/licenses/gpl-2.0.html
+ *
+ * GPL HEADER END
+ */
+/*
+ * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved.
+ * Use is subject to license terms.
+ *
+ * Copyright (c) 2011, 2014, Intel Corporation.
+ *
+ * Copyright 2015 Cray Inc, all rights reserved.
+ * Author: Ben Evans.
+ *
+ * We assume all nodes are either little-endian or big-endian, and we
+ * always send messages in the sender's native format.  The receiver
+ * detects the message format by checking the 'magic' field of the message
+ * (see lustre_msg_swabbed() below).
+ *
+ * Each wire type has corresponding 'lustre_swab_xxxtypexxx()' routines
+ * are implemented in ptlrpc/lustre_swab.c.  These 'swabbers' convert the
+ * type from "other" endian, in-place in the message buffer.
+ *
+ * A swabber takes a single pointer argument.  The caller must already have
+ * verified that the length of the message buffer >= sizeof (type).
+ *
+ * For variable length types, a second 'lustre_swab_v_xxxtypexxx()' routine
+ * may be defined that swabs just the variable part, after the caller has
+ * verified that the message buffer is large enough.
+ */
+
+#ifndef _LUSTRE_SWAB_H_
+#define _LUSTRE_SWAB_H_
+
+#include "lustre/lustre_idl.h"
+
+void lustre_swab_ptlrpc_body(struct ptlrpc_body *pb);
+void lustre_swab_connect(struct obd_connect_data *ocd);
+void lustre_swab_hsm_user_state(struct hsm_user_state *hus);
+void lustre_swab_hsm_state_set(struct hsm_state_set *hss);
+void lustre_swab_obd_statfs(struct obd_statfs *os);
+void lustre_swab_obd_ioobj(struct obd_ioobj *ioo);
+void lustre_swab_niobuf_remote(struct niobuf_remote *nbr);
+void lustre_swab_ost_lvb_v1(struct ost_lvb_v1 *lvb);
+void lustre_swab_ost_lvb(struct ost_lvb *lvb);
+void lustre_swab_obd_quotactl(struct obd_quotactl *q);
+void lustre_swab_lquota_lvb(struct lquota_lvb *lvb);
+void lustre_swab_generic_32s(__u32 *val);
+void lustre_swab_mdt_body(struct mdt_body *b);
+void lustre_swab_mdt_ioepoch(struct mdt_ioepoch *b);
+void lustre_swab_mdt_rec_setattr(struct mdt_rec_setattr *sa);
+void lustre_swab_mdt_rec_reint(struct mdt_rec_reint *rr);
+void lustre_swab_lmv_desc(struct lmv_desc *ld);
+void lustre_swab_lmv_mds_md(union lmv_mds_md *lmm);
+void lustre_swab_lov_desc(struct lov_desc *ld);
+void lustre_swab_gl_desc(union ldlm_gl_desc *desc);
+void lustre_swab_ldlm_intent(struct ldlm_intent *i);
+void lustre_swab_ldlm_request(struct ldlm_request *rq);
+void lustre_swab_ldlm_reply(struct ldlm_reply *r);
+void lustre_swab_mgs_target_info(struct mgs_target_info *oinfo);
+void lustre_swab_mgs_nidtbl_entry(struct mgs_nidtbl_entry *oinfo);
+void lustre_swab_mgs_config_body(struct mgs_config_body *body);
+void lustre_swab_mgs_config_res(struct mgs_config_res *body);
+void lustre_swab_ost_body(struct ost_body *b);
+void lustre_swab_ost_last_id(__u64 *id);
+void lustre_swab_fiemap(struct fiemap *fiemap);
+void lustre_swab_lov_user_md_v1(struct lov_user_md_v1 *lum);
+void lustre_swab_lov_user_md_v3(struct lov_user_md_v3 *lum);
+void lustre_swab_lov_user_md_objects(struct lov_user_ost_data *lod,
+				     int stripe_count);
+void lustre_swab_lov_mds_md(struct lov_mds_md *lmm);
+void lustre_swab_lustre_capa(struct lustre_capa *c);
+void lustre_swab_lustre_capa_key(struct lustre_capa_key *k);
+void lustre_swab_fid2path(struct getinfo_fid2path *gf);
+void lustre_swab_layout_intent(struct layout_intent *li);
+void lustre_swab_hsm_user_state(struct hsm_user_state *hus);
+void lustre_swab_hsm_current_action(struct hsm_current_action *action);
+void lustre_swab_hsm_progress_kernel(struct hsm_progress_kernel *hpk);
+void lustre_swab_hsm_user_state(struct hsm_user_state *hus);
+void lustre_swab_hsm_user_item(struct hsm_user_item *hui);
+void lustre_swab_hsm_request(struct hsm_request *hr);
+void lustre_swab_swap_layouts(struct mdc_swap_layouts *msl);
+void lustre_swab_close_data(struct close_data *data);
+void lustre_swab_lmv_user_md(struct lmv_user_md *lum);
+
+#endif

drivers/staging/lustre/lustre/ldlm/ldlm_lock.c

@@ -39,6 +39,7 @@
 
 #include "../../include/linux/libcfs/libcfs.h"
 #include "../include/lustre_intent.h"
+#include "../include/lustre_swab.h"
 #include "../include/obd_class.h"
 #include "ldlm_internal.h"
 

drivers/staging/lustre/lustre/llite/dir.c

@@ -51,6 +51,8 @@
 #include "../include/lustre_dlm.h"
 #include "../include/lustre_fid.h"
 #include "../include/lustre_kernelcomm.h"
+#include "../include/lustre_swab.h"
+
 #include "llite_internal.h"
 
 /*

drivers/staging/lustre/lustre/llite/file.c

@@ -44,6 +44,7 @@
 #include <linux/mount.h>
 #include "../include/lustre/ll_fiemap.h"
 #include "../include/lustre/lustre_ioctl.h"
+#include "../include/lustre_swab.h"
 
 #include "../include/cl_object.h"
 #include "llite_internal.h"

drivers/staging/lustre/lustre/lov/lov_obd.c

@@ -48,6 +48,7 @@
 #include "../include/lustre_dlm.h"
 #include "../include/lustre_mds.h"
 #include "../include/obd_class.h"
+#include "../include/lustre_swab.h"
 #include "../include/lprocfs_status.h"
 #include "../include/lustre_param.h"
 #include "../include/cl_object.h"

drivers/staging/lustre/lustre/lov/lov_pack.c

@@ -39,6 +39,7 @@
 #define DEBUG_SUBSYSTEM S_LOV
 
 #include "../include/lustre_net.h"
+#include "../include/lustre_swab.h"
 #include "../include/obd.h"
 #include "../include/obd_class.h"
 #include "../include/obd_support.h"

drivers/staging/lustre/lustre/mdc/mdc_locks.c

@@ -38,10 +38,12 @@
 #include "../include/obd.h"
 #include "../include/obd_class.h"
 #include "../include/lustre_dlm.h"
-#include "../include/lustre_fid.h"	/* fid_res_name_eq() */
+#include "../include/lustre_fid.h"
 #include "../include/lustre_mdc.h"
 #include "../include/lustre_net.h"
 #include "../include/lustre_req_layout.h"
+#include "../include/lustre_swab.h"
+
 #include "mdc_internal.h"
 
 struct mdc_getattr_args {

drivers/staging/lustre/lustre/mdc/mdc_request.c

@@ -38,6 +38,7 @@
 # include <linux/init.h>
 # include <linux/utsname.h>
 
+#include "../include/llog_swab.h"
 #include "../include/lustre_acl.h"
 #include "../include/lustre/lustre_ioctl.h"
 #include "../include/obd_class.h"
@@ -47,6 +48,7 @@
 #include "../include/lustre_param.h"
 #include "../include/lustre_log.h"
 #include "../include/lustre_kernelcomm.h"
+#include "../include/lustre_swab.h"
 
 #include "mdc_internal.h"
 

drivers/staging/lustre/lustre/mgc/mgc_request.c

@@ -43,6 +43,7 @@
 #include "../include/lprocfs_status.h"
 #include "../include/lustre_log.h"
 #include "../include/lustre_disk.h"
+#include "../include/lustre_swab.h"
 
 #include "mgc_internal.h"
 

drivers/staging/lustre/lustre/obdclass/llog.c

@@ -43,6 +43,7 @@
 
 #define DEBUG_SUBSYSTEM S_LOG
 
+#include "../include/llog_swab.h"
 #include "../include/obd_class.h"
 #include "../include/lustre_log.h"
 #include "llog_internal.h"

drivers/staging/lustre/lustre/obdclass/llog_swab.c

@@ -38,6 +38,7 @@
 
 #define DEBUG_SUBSYSTEM S_LOG
 
+#include "../include/llog_swab.h"
 #include "../include/lustre_log.h"
 
 static void print_llogd_body(struct llogd_body *d)

drivers/staging/lustre/lustre/obdclass/obd_config.c

@@ -38,6 +38,7 @@
 #include "../include/obd_class.h"
 #include <linux/string.h>
 #include "../include/lustre/lustre_ioctl.h"
+#include "../include/llog_swab.h"
 #include "../include/lustre_log.h"
 #include "../include/lprocfs_status.h"
 #include "../include/lustre_param.h"

drivers/staging/lustre/lustre/ptlrpc/layout.c

@@ -59,10 +59,12 @@
 
 /* __REQ_LAYOUT_USER__ */
 #endif
+#include "../include/llog_swab.h"
 /* struct ptlrpc_request, lustre_msg* */
 #include "../include/lustre_req_layout.h"
 #include "../include/lustre_acl.h"
 #include "../include/lustre_debug.h"
+#include "../include/lustre_swab.h"
 
 /*
  * RQFs (see below) refer to two struct req_msg_field arrays describing the

drivers/staging/lustre/lustre/ptlrpc/pack_generic.c

@@ -42,9 +42,11 @@
 
 #include "../../include/linux/libcfs/libcfs.h"
 
+#include "../include/llog_swab.h"
 #include "../include/obd_support.h"
 #include "../include/obd_class.h"
 #include "../include/lustre_net.h"
+#include "../include/lustre_swab.h"
 #include "../include/obd_cksum.h"
 #include "../include/lustre/ll_fiemap.h"