Merge tag 'usb-serial-4.9-rc2' of...

Merge tag 'usb-serial-4.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for v4.9-rc2

Here's a fix for a NULL-deref during probe which could be triggered by a
malicious device, and a fix for some missing error handling in cp210x
that also leaked some bits from the stack. Included is also a new device
id for ftdi_sio.
Signed-off-by: Johan Hovold <johan@kernel.org>

drivers/usb/serial/cp210x.c

@@ -1077,7 +1077,9 @@ static int cp210x_tiocmget(struct tty_struct *tty)
 	u8 control;
 	int result;
 
-	cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
+	result = cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
+	if (result)
+		return result;
 
 	result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
 		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)

drivers/usb/serial/ftdi_sio.c

@@ -986,7 +986,8 @@ static const struct usb_device_id id_table_combined[] = {
 	/* ekey Devices */
 	{ USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) },
 	/* Infineon Devices */
-	{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC1798_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC2X7_PID, 1) },
 	/* GE Healthcare devices */
 	{ USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
 	/* Active Research (Actisense) devices */

drivers/usb/serial/ftdi_sio_ids.h

@@ -626,8 +626,9 @@
 /*
  * Infineon Technologies
  */
-#define INFINEON_VID		0x058b
-#define INFINEON_TRIBOARD_PID	0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */
+#define INFINEON_VID		        0x058b
+#define INFINEON_TRIBOARD_TC1798_PID	0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */
+#define INFINEON_TRIBOARD_TC2X7_PID	0x0043 /* DAS JTAG TriBoard TC2X7 V1.0 */
 
 /*
  * Acton Research Corp.

drivers/usb/serial/usb-serial.c

@@ -1078,7 +1078,8 @@ static int usb_serial_probe(struct usb_interface *interface,
 
 	serial->disconnected = 0;
 
-	usb_serial_console_init(serial->port[0]->minor);
+	if (num_ports > 0)
+		usb_serial_console_init(serial->port[0]->minor);
 exit:
 	module_put(type->driver.owner);
 	return 0;