drm/i915: Add explicit pipe src size to pipe config

Rather that mess about with hdisplay/vdisplay from requested_mode, add
explicit pipe src size information to pipe config.

Now requested_mode is only really relevant for dvo/sdvo output timings.
For everything else either adjusted_mode or pipe src size should be
used.

In many places where we end up using pipe source size, we should
actually use the primary plane size, but we don't currently store
that information explicitly. As long as we treat primaries as full
screen only, we can get away with this. Eventually when we move
primaries over to drm_plane, we need to fix it all up.

v2: Add a comment to explain what pipe_src_{w,h} are
    Add a note about primary planes to commit message
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_display.c

@@ -4696,7 +4696,6 @@ static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
 	enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
 	struct drm_display_mode *adjusted_mode =
 		&intel_crtc->config.adjusted_mode;
-	struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
 	uint32_t vsyncshift, crtc_vtotal, crtc_vblank_end;
 
 	/* We need to be careful not to changed the adjusted mode, for otherwise
@@ -4749,7 +4748,8 @@ static void intel_set_pipe_timings(struct intel_crtc *intel_crtc)
 	 * always be the user's requested size.
 	 */
 	I915_WRITE(PIPESRC(pipe),
-		   ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+		   ((intel_crtc->config.pipe_src_w - 1) << 16) |
+		   (intel_crtc->config.pipe_src_h - 1));
 }
 
 static void intel_get_pipe_timings(struct intel_crtc *crtc,
@@ -4787,8 +4787,11 @@ static void intel_get_pipe_timings(struct intel_crtc *crtc,
 	}
 
 	tmp = I915_READ(PIPESRC(crtc->pipe));
-	pipe_config->requested_mode.vdisplay = (tmp & 0xffff) + 1;
-	pipe_config->requested_mode.hdisplay = ((tmp >> 16) & 0xffff) + 1;
+	pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
+	pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
+
+	pipe_config->requested_mode.vdisplay = pipe_config->pipe_src_h;
+	pipe_config->requested_mode.hdisplay = pipe_config->pipe_src_w;
 }
 
 static void intel_crtc_mode_from_pipe_config(struct intel_crtc *intel_crtc,
@@ -4884,7 +4887,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	struct drm_display_mode *mode = &intel_crtc->config.requested_mode;
 	int pipe = intel_crtc->pipe;
 	int plane = intel_crtc->plane;
 	int refclk, num_connectors = 0;
@@ -4983,8 +4985,8 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 	 * which should always be the user's requested size.
 	 */
 	I915_WRITE(DSPSIZE(plane),
-		   ((mode->vdisplay - 1) << 16) |
-		   (mode->hdisplay - 1));
+		   ((intel_crtc->config.pipe_src_h - 1) << 16) |
+		   (intel_crtc->config.pipe_src_w - 1));
 	I915_WRITE(DSPPOS(plane), 0);
 
 	i9xx_set_pipeconf(intel_crtc);
@@ -8349,6 +8351,8 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 	DRM_DEBUG_KMS("adjusted mode:\n");
 	drm_mode_debug_printmodeline(&pipe_config->adjusted_mode);
 	DRM_DEBUG_KMS("port clock: %d\n", pipe_config->port_clock);
+	DRM_DEBUG_KMS("pipe src size: %dx%d\n",
+		      pipe_config->pipe_src_w, pipe_config->pipe_src_h);
 	DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
 		      pipe_config->gmch_pfit.control,
 		      pipe_config->gmch_pfit.pgm_ratios,
@@ -8400,6 +8404,10 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
 
 	drm_mode_copy(&pipe_config->adjusted_mode, mode);
 	drm_mode_copy(&pipe_config->requested_mode, mode);
+
+	pipe_config->pipe_src_w = mode->hdisplay;
+	pipe_config->pipe_src_h = mode->vdisplay;
+
 	pipe_config->cpu_transcoder =
 		(enum transcoder) to_intel_crtc(crtc)->pipe;
 	pipe_config->shared_dpll = DPLL_ID_PRIVATE;
@@ -8756,8 +8764,8 @@ intel_pipe_config_compare(struct drm_device *dev,
 				      DRM_MODE_FLAG_NVSYNC);
 	}
 
-	PIPE_CONF_CHECK_I(requested_mode.hdisplay);
-	PIPE_CONF_CHECK_I(requested_mode.vdisplay);
+	PIPE_CONF_CHECK_I(pipe_src_w);
+	PIPE_CONF_CHECK_I(pipe_src_h);
 
 	PIPE_CONF_CHECK_I(gmch_pfit.control);
 	/* pfit ratios are autocomputed by the hw on gen4+ */

drivers/gpu/drm/i915/intel_drv.h

@@ -215,6 +215,12 @@ struct intel_crtc_config {
 	/* Actual pipe timings ie. what we program into the pipe timing
 	 * registers. adjusted_mode.clock is the pipe pixel clock. */
 	struct drm_display_mode adjusted_mode;
+
+	/* Pipe source size (ie. panel fitter input size)
+	 * All planes will be positioned inside this space,
+	 * and get clipped at the edges. */
+	int pipe_src_w, pipe_src_h;
+
 	/* Whether to set up the PCH/FDI. Note that we never allow sharing
 	 * between pch encoders and cpu encoders. */
 	bool has_pch_encoder;

drivers/gpu/drm/i915/intel_panel.c

@@ -50,23 +50,22 @@ intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
 			struct intel_crtc_config *pipe_config,
 			int fitting_mode)
 {
-	struct drm_display_mode *mode, *adjusted_mode;
+	struct drm_display_mode *adjusted_mode;
 	int x, y, width, height;
 
-	mode = &pipe_config->requested_mode;
 	adjusted_mode = &pipe_config->adjusted_mode;
 
 	x = y = width = height = 0;
 
 	/* Native modes don't need fitting */
-	if (adjusted_mode->hdisplay == mode->hdisplay &&
-	    adjusted_mode->vdisplay == mode->vdisplay)
+	if (adjusted_mode->hdisplay == pipe_config->pipe_src_w &&
+	    adjusted_mode->vdisplay == pipe_config->pipe_src_h)
 		goto done;
 
 	switch (fitting_mode) {
 	case DRM_MODE_SCALE_CENTER:
-		width = mode->hdisplay;
-		height = mode->vdisplay;
+		width = pipe_config->pipe_src_w;
+		height = pipe_config->pipe_src_h;
 		x = (adjusted_mode->hdisplay - width + 1)/2;
 		y = (adjusted_mode->vdisplay - height + 1)/2;
 		break;
@@ -74,17 +73,17 @@ intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
 	case DRM_MODE_SCALE_ASPECT:
 		/* Scale but preserve the aspect ratio */
 		{
-			u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay;
-			u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay;
+			u32 scaled_width = adjusted_mode->hdisplay * pipe_config->pipe_src_h;
+			u32 scaled_height = pipe_config->pipe_src_w * adjusted_mode->vdisplay;
 			if (scaled_width > scaled_height) { /* pillar */
-				width = scaled_height / mode->vdisplay;
+				width = scaled_height / pipe_config->pipe_src_h;
 				if (width & 1)
 					width++;
 				x = (adjusted_mode->hdisplay - width + 1) / 2;
 				y = 0;
 				height = adjusted_mode->vdisplay;
 			} else if (scaled_width < scaled_height) { /* letter */
-				height = scaled_width / mode->hdisplay;
+				height = scaled_width / pipe_config->pipe_src_w;
 				if (height & 1)
 				    height++;
 				y = (adjusted_mode->vdisplay - height + 1) / 2;
@@ -176,14 +175,13 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
 {
 	struct drm_device *dev = intel_crtc->base.dev;
 	u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
-	struct drm_display_mode *mode, *adjusted_mode;
+	struct drm_display_mode *adjusted_mode;
 
-	mode = &pipe_config->requested_mode;
 	adjusted_mode = &pipe_config->adjusted_mode;
 
 	/* Native modes don't need fitting */
-	if (adjusted_mode->hdisplay == mode->hdisplay &&
-	    adjusted_mode->vdisplay == mode->vdisplay)
+	if (adjusted_mode->hdisplay == pipe_config->pipe_src_w &&
+	    adjusted_mode->vdisplay == pipe_config->pipe_src_h)
 		goto out;
 
 	switch (fitting_mode) {
@@ -192,16 +190,16 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
 		 * For centered modes, we have to calculate border widths &
 		 * heights and modify the values programmed into the CRTC.
 		 */
-		centre_horizontally(adjusted_mode, mode->hdisplay);
-		centre_vertically(adjusted_mode, mode->vdisplay);
+		centre_horizontally(adjusted_mode, pipe_config->pipe_src_w);
+		centre_vertically(adjusted_mode, pipe_config->pipe_src_h);
 		border = LVDS_BORDER_ENABLE;
 		break;
 	case DRM_MODE_SCALE_ASPECT:
 		/* Scale but preserve the aspect ratio */
 		if (INTEL_INFO(dev)->gen >= 4) {
 			u32 scaled_width = adjusted_mode->hdisplay *
-				mode->vdisplay;
-			u32 scaled_height = mode->hdisplay *
+				pipe_config->pipe_src_h;
+			u32 scaled_height = pipe_config->pipe_src_w *
 				adjusted_mode->vdisplay;
 
 			/* 965+ is easy, it does everything in hw */
@@ -211,12 +209,12 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
 			else if (scaled_width < scaled_height)
 				pfit_control |= PFIT_ENABLE |
 					PFIT_SCALING_LETTER;
-			else if (adjusted_mode->hdisplay != mode->hdisplay)
+			else if (adjusted_mode->hdisplay != pipe_config->pipe_src_w)
 				pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO;
 		} else {
 			u32 scaled_width = adjusted_mode->hdisplay *
-				mode->vdisplay;
-			u32 scaled_height = mode->hdisplay *
+				pipe_config->pipe_src_h;
+			u32 scaled_height = pipe_config->pipe_src_w *
 				adjusted_mode->vdisplay;
 			/*
 			 * For earlier chips we have to calculate the scaling
@@ -226,11 +224,11 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
 			if (scaled_width > scaled_height) { /* pillar */
 				centre_horizontally(adjusted_mode,
 						    scaled_height /
-						    mode->vdisplay);
+						    pipe_config->pipe_src_h);
 
 				border = LVDS_BORDER_ENABLE;
-				if (mode->vdisplay != adjusted_mode->vdisplay) {
-					u32 bits = panel_fitter_scaling(mode->vdisplay, adjusted_mode->vdisplay);
+				if (pipe_config->pipe_src_h != adjusted_mode->vdisplay) {
+					u32 bits = panel_fitter_scaling(pipe_config->pipe_src_h, adjusted_mode->vdisplay);
 					pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
 							    bits << PFIT_VERT_SCALE_SHIFT);
 					pfit_control |= (PFIT_ENABLE |
@@ -240,11 +238,11 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
 			} else if (scaled_width < scaled_height) { /* letter */
 				centre_vertically(adjusted_mode,
 						  scaled_width /
-						  mode->hdisplay);
+						  pipe_config->pipe_src_w);
 
 				border = LVDS_BORDER_ENABLE;
-				if (mode->hdisplay != adjusted_mode->hdisplay) {
-					u32 bits = panel_fitter_scaling(mode->hdisplay, adjusted_mode->hdisplay);
+				if (pipe_config->pipe_src_w != adjusted_mode->hdisplay) {
+					u32 bits = panel_fitter_scaling(pipe_config->pipe_src_w, adjusted_mode->hdisplay);
 					pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT |
 							    bits << PFIT_VERT_SCALE_SHIFT);
 					pfit_control |= (PFIT_ENABLE |
@@ -265,8 +263,8 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
 		 * Full scaling, even if it changes the aspect ratio.
 		 * Fortunately this is all done for us in hw.
 		 */
-		if (mode->vdisplay != adjusted_mode->vdisplay ||
-		    mode->hdisplay != adjusted_mode->hdisplay) {
+		if (pipe_config->pipe_src_h != adjusted_mode->vdisplay ||
+		    pipe_config->pipe_src_w != adjusted_mode->hdisplay) {
 			pfit_control |= PFIT_ENABLE;
 			if (INTEL_INFO(dev)->gen >= 4)
 				pfit_control |= PFIT_SCALING_AUTO;

drivers/gpu/drm/i915/intel_pm.c

@@ -450,9 +450,8 @@ void intel_update_fbc(struct drm_device *dev)
 	struct drm_framebuffer *fb;
 	struct intel_framebuffer *intel_fb;
 	struct drm_i915_gem_object *obj;
-	const struct drm_display_mode *mode;
 	const struct drm_display_mode *adjusted_mode;
-	unsigned int max_hdisplay, max_vdisplay;
+	unsigned int max_width, max_height;
 
 	if (!I915_HAS_FBC(dev)) {
 		set_no_fbc_reason(dev_priv, FBC_UNSUPPORTED);
@@ -496,7 +495,6 @@ void intel_update_fbc(struct drm_device *dev)
 	fb = crtc->fb;
 	intel_fb = to_intel_framebuffer(fb);
 	obj = intel_fb->obj;
-	mode = &intel_crtc->config.requested_mode;
 	adjusted_mode = &intel_crtc->config.adjusted_mode;
 
 	if (i915_enable_fbc < 0 &&
@@ -519,14 +517,14 @@ void intel_update_fbc(struct drm_device *dev)
 	}
 
 	if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
-		max_hdisplay = 4096;
-		max_vdisplay = 2048;
+		max_width = 4096;
+		max_height = 2048;
 	} else {
-		max_hdisplay = 2048;
-		max_vdisplay = 1536;
+		max_width = 2048;
+		max_height = 1536;
 	}
-	if ((mode->hdisplay > max_hdisplay) ||
-	    (mode->vdisplay > max_vdisplay)) {
+	if (intel_crtc->config.pipe_src_w > max_width ||
+	    intel_crtc->config.pipe_src_h > max_height) {
 		if (set_no_fbc_reason(dev_priv, FBC_MODE_TOO_LARGE))
 			DRM_DEBUG_KMS("mode too large for compression, disabling\n");
 		goto out_disable;
@@ -1178,7 +1176,7 @@ static bool g4x_compute_wm0(struct drm_device *dev,
 	adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode;
 	clock = adjusted_mode->clock;
 	htotal = adjusted_mode->htotal;
-	hdisplay = to_intel_crtc(crtc)->config.requested_mode.hdisplay;
+	hdisplay = to_intel_crtc(crtc)->config.pipe_src_w;
 	pixel_size = crtc->fb->bits_per_pixel / 8;
 
 	/* Use the small buffer method to calculate plane watermark */
@@ -1265,7 +1263,7 @@ static bool g4x_compute_srwm(struct drm_device *dev,
 	adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode;
 	clock = adjusted_mode->clock;
 	htotal = adjusted_mode->htotal;
-	hdisplay = to_intel_crtc(crtc)->config.requested_mode.hdisplay;
+	hdisplay = to_intel_crtc(crtc)->config.pipe_src_w;
 	pixel_size = crtc->fb->bits_per_pixel / 8;
 
 	line_time_us = (htotal * 1000) / clock;
@@ -1496,7 +1494,7 @@ static void i965_update_wm(struct drm_crtc *unused_crtc)
 			&to_intel_crtc(crtc)->config.adjusted_mode;
 		int clock = adjusted_mode->clock;
 		int htotal = adjusted_mode->htotal;
-		int hdisplay = to_intel_crtc(crtc)->config.requested_mode.hdisplay;
+		int hdisplay = to_intel_crtc(crtc)->config.pipe_src_w;
 		int pixel_size = crtc->fb->bits_per_pixel / 8;
 		unsigned long line_time_us;
 		int entries;
@@ -1618,7 +1616,7 @@ static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 			&to_intel_crtc(enabled)->config.adjusted_mode;
 		int clock = adjusted_mode->clock;
 		int htotal = adjusted_mode->htotal;
-		int hdisplay = to_intel_crtc(crtc)->config.requested_mode.hdisplay;
+		int hdisplay = to_intel_crtc(crtc)->config.pipe_src_w;
 		int pixel_size = enabled->fb->bits_per_pixel / 8;
 		unsigned long line_time_us;
 		int entries;
@@ -1768,7 +1766,7 @@ static bool ironlake_compute_srwm(struct drm_device *dev, int level, int plane,
 	adjusted_mode = &to_intel_crtc(crtc)->config.adjusted_mode;
 	clock = adjusted_mode->clock;
 	htotal = adjusted_mode->htotal;
-	hdisplay = to_intel_crtc(crtc)->config.requested_mode.hdisplay;
+	hdisplay = to_intel_crtc(crtc)->config.pipe_src_w;
 	pixel_size = crtc->fb->bits_per_pixel / 8;
 
 	line_time_us = (htotal * 1000) / clock;
@@ -2123,8 +2121,8 @@ static uint32_t ilk_pipe_pixel_rate(struct drm_device *dev,
 	if (pfit_size) {
 		uint64_t pipe_w, pipe_h, pfit_w, pfit_h;
 
-		pipe_w = intel_crtc->config.requested_mode.hdisplay;
-		pipe_h = intel_crtc->config.requested_mode.vdisplay;
+		pipe_w = intel_crtc->config.pipe_src_w;
+		pipe_h = intel_crtc->config.pipe_src_h;
 		pfit_w = (pfit_size >> 16) & 0xFFFF;
 		pfit_h = pfit_size & 0xFFFF;
 		if (pipe_w < pfit_w)
@@ -2650,8 +2648,7 @@ static void hsw_compute_wm_parameters(struct drm_device *dev,
 		p->pixel_rate = ilk_pipe_pixel_rate(dev, crtc);
 		p->pri.bytes_per_pixel = crtc->fb->bits_per_pixel / 8;
 		p->cur.bytes_per_pixel = 4;
-		p->pri.horiz_pixels =
-			intel_crtc->config.requested_mode.hdisplay;
+		p->pri.horiz_pixels = intel_crtc->config.pipe_src_w;
 		p->cur.horiz_pixels = 64;
 		/* TODO: for now, assume primary and cursor planes are always enabled. */
 		p->pri.enabled = true;

drivers/gpu/drm/i915/intel_sprite.c

@@ -652,8 +652,8 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 		.y2 = crtc_y + crtc_h,
 	};
 	const struct drm_rect clip = {
-		.x2 = intel_crtc->config.requested_mode.hdisplay,
-		.y2 = intel_crtc->config.requested_mode.vdisplay,
+		.x2 = intel_crtc->config.pipe_src_w,
+		.y2 = intel_crtc->config.pipe_src_h,
 	};
 
 	intel_fb = to_intel_framebuffer(fb);