arm64: dts: qcom: sc7280: Move pcie1_clkreq pull / drive str to boards

Pullups and drive strength don't belong in the SoC dtsi file. Move to
the board file.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220202132301.v3.8.Iffff0c12440a047212a164601e637b03b9d2fc78@changeid

arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts

@@ -826,6 +826,11 @@ &usb_2_hsphy {
 
 /* PINCTRL - additions to nodes defined in sc7280.dtsi */
 
+&pcie1_clkreq_n {
+	bias-pull-up;
+	drive-strength = <2>;
+};
+
 &qspi_cs0 {
 	bias-disable;
 };

arch/arm64/boot/dts/qcom/sc7280-idp.dtsi

@@ -366,6 +366,11 @@ key_vol_up_default: key-vol-up-default {
 	};
 };
 
+&pcie1_clkreq_n {
+	bias-pull-up;
+	drive-strength = <2>;
+};
+
 &qspi_cs0 {
 	bias-disable;
 };

arch/arm64/boot/dts/qcom/sc7280.dtsi

@@ -3295,8 +3295,6 @@ edp_hot_plug_det: edp-hot-plug-det {
 			pcie1_clkreq_n: pcie1-clkreq-n {
 				pins = "gpio79";
 				function = "pcie1_clkreqn";
-				drive-strength = <2>;
-				bias-pull-up;
 			};
 
 			qspi_clk: qspi-clk {