Commit 379b39a2 authored by Michael Chan's avatar Michael Chan Committed by David S. Miller

bnx2: Call pci_enable_msix() with actual number of vectors.

Based on original patch by Breno Leitão <leitao@linux.vnet.ibm.com>.

Allocate the actual number of vectors and make use of fewer vectors
if pci_enable_msix() returns > 0.  We must allocate one additional
vector for the cnic driver.

Cc: Breno Leitão <leitao@linux.vnet.ibm.com>
Reviewed-by: default avatarBenjamin Li <benli@broadcom.com>
Reviewed-by: default avatarMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 6fdae995
...@@ -864,7 +864,7 @@ bnx2_alloc_mem(struct bnx2 *bp) ...@@ -864,7 +864,7 @@ bnx2_alloc_mem(struct bnx2 *bp)
bnapi->hw_rx_cons_ptr = bnapi->hw_rx_cons_ptr =
&bnapi->status_blk.msi->status_rx_quick_consumer_index0; &bnapi->status_blk.msi->status_rx_quick_consumer_index0;
if (bp->flags & BNX2_FLAG_MSIX_CAP) { if (bp->flags & BNX2_FLAG_MSIX_CAP) {
for (i = 1; i < BNX2_MAX_MSIX_VEC; i++) { for (i = 1; i < bp->irq_nvecs; i++) {
struct status_block_msix *sblk; struct status_block_msix *sblk;
bnapi = &bp->bnx2_napi[i]; bnapi = &bp->bnx2_napi[i];
...@@ -6152,7 +6152,7 @@ bnx2_free_irq(struct bnx2 *bp) ...@@ -6152,7 +6152,7 @@ bnx2_free_irq(struct bnx2 *bp)
static void static void
bnx2_enable_msix(struct bnx2 *bp, int msix_vecs) bnx2_enable_msix(struct bnx2 *bp, int msix_vecs)
{ {
int i, rc; int i, total_vecs, rc;
struct msix_entry msix_ent[BNX2_MAX_MSIX_VEC]; struct msix_entry msix_ent[BNX2_MAX_MSIX_VEC];
struct net_device *dev = bp->dev; struct net_device *dev = bp->dev;
const int len = sizeof(bp->irq_tbl[0].name); const int len = sizeof(bp->irq_tbl[0].name);
...@@ -6171,13 +6171,29 @@ bnx2_enable_msix(struct bnx2 *bp, int msix_vecs) ...@@ -6171,13 +6171,29 @@ bnx2_enable_msix(struct bnx2 *bp, int msix_vecs)
msix_ent[i].vector = 0; msix_ent[i].vector = 0;
} }
rc = pci_enable_msix(bp->pdev, msix_ent, BNX2_MAX_MSIX_VEC); total_vecs = msix_vecs;
#ifdef BCM_CNIC
total_vecs++;
#endif
rc = -ENOSPC;
while (total_vecs >= BNX2_MIN_MSIX_VEC) {
rc = pci_enable_msix(bp->pdev, msix_ent, total_vecs);
if (rc <= 0)
break;
if (rc > 0)
total_vecs = rc;
}
if (rc != 0) if (rc != 0)
return; return;
msix_vecs = total_vecs;
#ifdef BCM_CNIC
msix_vecs--;
#endif
bp->irq_nvecs = msix_vecs; bp->irq_nvecs = msix_vecs;
bp->flags |= BNX2_FLAG_USING_MSIX | BNX2_FLAG_ONE_SHOT_MSI; bp->flags |= BNX2_FLAG_USING_MSIX | BNX2_FLAG_ONE_SHOT_MSI;
for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) { for (i = 0; i < total_vecs; i++) {
bp->irq_tbl[i].vector = msix_ent[i].vector; bp->irq_tbl[i].vector = msix_ent[i].vector;
snprintf(bp->irq_tbl[i].name, len, "%s-%d", dev->name, i); snprintf(bp->irq_tbl[i].name, len, "%s-%d", dev->name, i);
bp->irq_tbl[i].handler = bnx2_msi_1shot; bp->irq_tbl[i].handler = bnx2_msi_1shot;
......
...@@ -6637,9 +6637,12 @@ struct flash_spec { ...@@ -6637,9 +6637,12 @@ struct flash_spec {
#define BNX2_MAX_MSIX_HW_VEC 9 #define BNX2_MAX_MSIX_HW_VEC 9
#define BNX2_MAX_MSIX_VEC 9 #define BNX2_MAX_MSIX_VEC 9
#define BNX2_BASE_VEC 0 #ifdef BCM_CNIC
#define BNX2_TX_VEC 1 #define BNX2_MIN_MSIX_VEC 2
#define BNX2_TX_INT_NUM (BNX2_TX_VEC << BNX2_PCICFG_INT_ACK_CMD_INT_NUM_SHIFT) #else
#define BNX2_MIN_MSIX_VEC 1
#endif
struct bnx2_irq { struct bnx2_irq {
irq_handler_t handler; irq_handler_t handler;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment