Merge branch 'ib-mt8135' into devel

Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT65xx Pin Controller Device Tree Bindings
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+  The Mediatek's Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-pinctrl
+      - mediatek,mt2712-pinctrl
+      - mediatek,mt6397-pinctrl
+      - mediatek,mt7623-pinctrl
+      - mediatek,mt8127-pinctrl
+      - mediatek,mt8135-pinctrl
+      - mediatek,mt8167-pinctrl
+      - mediatek,mt8173-pinctrl
+      - mediatek,mt8516-pinctrl
+
+  reg:
+    maxItems: 1
+
+  pins-are-numbered:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Specify the subnodes are using numbered pinmux to specify pins.
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  mediatek,pctl-regmap:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 2
+    description: |
+      Should be phandles of the syscfg node.
+
+  interrupt-controller: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - pins-are-numbered
+  - gpio-controller
+  - "#gpio-cells"
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      'pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pinmux:
+            description:
+              integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in <soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up:
+            description: |
+              Besides generic pinconfig options, it can be used as the pull up
+              settings for 2 pull resistors, R0 and R1. User can configure those
+              special pins. Some macros have been defined for this usage, such
+              as MTK_PUPD_SET_R1R0_00. See dt-bindings/pinctrl/mt65xx.h for
+              valid arguments.
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            description: |
+              Can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA,
+              etc. See dt-bindings/pinctrl/mt65xx.h for valid arguments.
+
+        required:
+          - pinmux
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt8135-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        syscfg_pctl_a: syscfg-pctl-a@10005000 {
+          compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
+          reg = <0 0x10005000 0 0x1000>;
+        };
+
+        syscfg_pctl_b: syscfg-pctl-b@1020c020 {
+          compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
+          reg = <0 0x1020C020 0 0x1000>;
+        };
+
+        pinctrl@1c20800 {
+          compatible = "mediatek,mt8135-pinctrl";
+          reg = <0 0x1000B000 0 0x1000>;
+          mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
+          pins-are-numbered;
+          gpio-controller;
+          #gpio-cells = <2>;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+          interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+              <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+              <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+
+          i2c0_pins_a: i2c0-0 {
+            pins1 {
+              pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
+                <MT8135_PIN_101_SCL0__FUNC_SCL0>;
+              bias-disable;
+            };
+          };
+
+          i2c1_pins_a: i2c1-0 {
+            pins {
+              pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
+                <MT8135_PIN_196_SCL1__FUNC_SCL1>;
+              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            };
+          };
+
+          i2c2_pins_a: i2c2-0 {
+            pins1 {
+              pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
+              bias-pull-down;
+            };
+
+            pins2 {
+              pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
+              bias-pull-up;
+            };
+          };
+
+          i2c3_pins_a: i2c3-0 {
+            pins1 {
+              pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
+                <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;
+              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            };
+
+            pins2 {
+              pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>,
+                <MT8135_PIN_36_SDA3__FUNC_SDA3>;
+              output-low;
+              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            };
+
+            pins3 {
+              pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>,
+                <MT8135_PIN_60_JTDI__FUNC_JTDI>;
+              drive-strength = <32>;
+            };
+          };
+        };
+    };

Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6797-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6797 Pin Controller Device Tree Bindings
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+  The MediaTek's MT6797 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt6797-pinctrl
+
+  reg:
+    minItems: 5
+    maxItems: 5
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: iocfgl
+      - const: iocfgb
+      - const: iocfgr
+      - const: iocfgt
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      'pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pinmux:
+            description:
+              integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in <soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-enable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [2, 4, 8, 12, 16]
+
+          slew-rate:
+            enum: [0, 1]
+
+          mediatek,pull-up-adv:
+            description: |
+              Pull up setings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Pull down settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,tdsel:
+            description: |
+              An integer describing the steps for output level shifter duty
+              cycle when asserted (high pulse width adjustment). Valid arguments
+              are from 0 to 15.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          mediatek,rdsel:
+            description: |
+              An integer describing the steps for input level shifter duty cycle
+              when asserted (high pulse width adjustment). Valid arguments are
+              from 0 to 63.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - pinmux
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt6797-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10005000 {
+            compatible = "mediatek,mt6797-pinctrl";
+            reg = <0 0x10005000 0 0x1000>,
+                  <0 0x10002000 0 0x400>,
+                  <0 0x10002400 0 0x400>,
+                  <0 0x10002800 0 0x400>,
+                  <0 0x10002C00 0 0x400>;
+            reg-names = "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt";
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            uart_pins_a: uart-0 {
+                pins1 {
+                    pinmux = <MT6797_GPIO232__FUNC_URXD1>,
+                            <MT6797_GPIO233__FUNC_UTXD1>;
+                };
+            };
+        };
+    };

Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8183-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8183 Pin Controller Device Tree Bindings
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+  The MediaTek's MT8183 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8183-pinctrl
+
+  reg:
+    minItems: 10
+    maxItems: 10
+
+  reg-names:
+    items:
+      - const: iocfg0
+      - const: iocfg1
+      - const: iocfg2
+      - const: iocfg3
+      - const: iocfg4
+      - const: iocfg5
+      - const: iocfg6
+      - const: iocfg7
+      - const: iocfg8
+      - const: eint
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 5
+    description: |
+      GPIO valid number range.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      'pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pinmux:
+            description:
+              integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in <soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          mediatek,drive-strength-adv:
+            description: |
+              Describe the specific driving setup property.
+              For I2C pins, the existing generic driving setup can only support
+              2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
+              can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
+              driving setup, the existing generic setup will be disabled.
+              The specific driving setup is controlled by E1E0EN.
+              When E1=0/E0=0, the strength is 0.125mA.
+              When E1=0/E0=1, the strength is 0.25mA.
+              When E1=1/E0=0, the strength is 0.5mA.
+              When E1=1/E0=1, the strength is 1mA.
+              EN is used to enable or disable the specific driving setup.
+              Valid arguments are described as below:
+              0: (E1, E0, EN) = (0, 0, 0)
+              1: (E1, E0, EN) = (0, 0, 1)
+              2: (E1, E0, EN) = (0, 1, 0)
+              3: (E1, E0, EN) = (0, 1, 1)
+              4: (E1, E0, EN) = (1, 0, 0)
+              5: (E1, E0, EN) = (1, 0, 1)
+              6: (E1, E0, EN) = (1, 1, 0)
+              7: (E1, E0, EN) = (1, 1, 1)
+              So the valid arguments are from 0 to 7.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+          mediatek,pull-up-adv:
+            description: |
+              Pull up setings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Pull down settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,tdsel:
+            description: |
+              An integer describing the steps for output level shifter duty
+              cycle when asserted (high pulse width adjustment). Valid arguments
+              are from 0 to 15.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          mediatek,rdsel:
+            description: |
+              An integer describing the steps for input level shifter duty cycle
+              when asserted (high pulse width adjustment). Valid arguments are
+              from 0 to 63.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - pinmux
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt8183-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10005000 {
+          compatible = "mediatek,mt8183-pinctrl";
+          reg = <0 0x10005000 0 0x1000>,
+                <0 0x11f20000 0 0x1000>,
+                <0 0x11e80000 0 0x1000>,
+                <0 0x11e70000 0 0x1000>,
+                <0 0x11e90000 0 0x1000>,
+                <0 0x11d30000 0 0x1000>,
+                <0 0x11d20000 0 0x1000>,
+                <0 0x11c50000 0 0x1000>,
+                <0 0x11f30000 0 0x1000>,
+                <0 0x1000b000 0 0x1000>;
+          reg-names = "iocfg0", "iocfg1", "iocfg2",
+                "iocfg3", "iocfg4", "iocfg5",
+                "iocfg6", "iocfg7", "iocfg8",
+                "eint";
+          gpio-controller;
+          #gpio-cells = <2>;
+          gpio-ranges = <&pio 0 0 192>;
+          interrupt-controller;
+          interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+          #interrupt-cells = <2>;
+
+          i2c0_pins_a: i2c-0 {
+            pins1 {
+              pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+                <PINMUX_GPIO49__FUNC_SDA5>;
+              mediatek,pull-up-adv = <3>;
+              mediatek,drive-strength-adv = <7>;
+            };
+          };
+
+          i2c1_pins_a: i2c-1 {
+            pins {
+              pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+                <PINMUX_GPIO51__FUNC_SDA3>;
+              mediatek,pull-down-adv = <2>;
+              mediatek,drive-strength-adv = <4>;
+            };
+          };
+        };
+    };

Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt

-* Mediatek MT65XX Pin Controller
-
-The Mediatek's Pin controller is used to control SoC pins.
-
-Required properties:
-- compatible: value should be one of the following.
-	"mediatek,mt2701-pinctrl", compatible with mt2701 pinctrl.
-	"mediatek,mt2712-pinctrl", compatible with mt2712 pinctrl.
-	"mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl.
-	"mediatek,mt7623-pinctrl", compatible with mt7623 pinctrl.
-	"mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl.
-	"mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl.
-	"mediatek,mt8167-pinctrl", compatible with mt8167 pinctrl.
-	"mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl.
-	"mediatek,mt8365-pinctrl", compatible with mt8365 pinctrl.
-	"mediatek,mt8516-pinctrl", compatible with mt8516 pinctrl.
-- pins-are-numbered: Specify the subnodes are using numbered pinmux to
-  specify pins.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
-  binding is used, the amount of cells must be specified as 2. See the below
-  mentioned gpio binding representation for description of particular cells.
-
-	Eg: <&pio 6 0>
-	<[phandle of the gpio controller node]
-	[line number within the gpio controller]
-	[flags]>
-
-	Values for gpio specifier:
-	- Line number: is a value between 0 to 202.
-	- Flags:  bit field of flags, as defined in <dt-bindings/gpio/gpio.h>.
-            Only the following flags are supported:
-            0 - GPIO_ACTIVE_HIGH
-            1 - GPIO_ACTIVE_LOW
-
-Optional properties:
-- mediatek,pctl-regmap: Should be a phandle of the syscfg node.
-- reg: physicall address base for EINT registers
-- interrupt-controller: Marks the device node as an interrupt controller
-- #interrupt-cells: Should be two.
-- interrupts : The interrupt outputs from the controller.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices.
-
-Subnode format
-A pinctrl node should contain at least one subnodes representing the
-pinctrl groups available on the machine. Each subnode will list the
-pins it needs, and how they should be configured, with regard to muxer
-configuration, pullups, drive strength, input enable/disable and input schmitt.
-
-    node {
-	pinmux = <PIN_NUMBER_PINMUX>;
-	GENERIC_PINCONFIG;
-    };
-
-Required properties:
-- pinmux: integer array, represents gpio pin number and mux setting.
-    Supported pin number and mux varies for different SoCs, and are defined
-    as macros in boot/dts/<soc>-pinfunc.h directly.
-
-Optional properties:
-- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable,
-    bias-pull-down, bias-pull-up, input-enable, input-disable, output-low, output-high,
-    input-schmitt-enable, input-schmitt-disable and drive-strength are valid.
-
-    Some special pins have extra pull up strength, there are R0 and R1 pull-up
-    resistors available, but for user, it's only need to set R1R0 as 00, 01, 10 or 11.
-    So when config bias-pull-up, it support arguments for those special pins.
-    Some macros have been defined for this usage, such as MTK_PUPD_SET_R1R0_00.
-    See dt-bindings/pinctrl/mt65xx.h.
-
-    When config drive-strength, it can support some arguments, such as
-    MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h.
-
-Examples:
-
-#include "mt8135-pinfunc.h"
-
-...
-{
-	syscfg_pctl_a: syscfg-pctl-a@10005000 {
-		compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
-		reg = <0 0x10005000 0 0x1000>;
-	};
-
-	syscfg_pctl_b: syscfg-pctl-b@1020c020 {
-		compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
-		reg = <0 0x1020C020 0 0x1000>;
-	};
-
-	pinctrl@1c20800 {
-		compatible = "mediatek,mt8135-pinctrl";
-		reg = <0 0x1000B000 0 0x1000>;
-		mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
-		pins-are-numbered;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-
-		i2c0_pins_a: i2c0@0 {
-			pins1 {
-				pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
-					 <MT8135_PIN_101_SCL0__FUNC_SCL0>;
-				bias-disable;
-			};
-		};
-
-		i2c1_pins_a: i2c1@0 {
-			pins {
-				pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
-					 <MT8135_PIN_196_SCL1__FUNC_SCL1>;
-				bias-pull-up = <55>;
-			};
-		};
-
-		i2c2_pins_a: i2c2@0 {
-			pins1 {
-				pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
-				bias-pull-down;
-			};
-
-			pins2 {
-				pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
-				bias-pull-up;
-			};
-		};
-
-		i2c3_pins_a: i2c3@0 {
-			pins1 {
-				pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
-					 <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;
-				bias-pull-up = <55>;
-			};
-
-			pins2 {
-				pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>,
-					 <MT8135_PIN_36_SDA3__FUNC_SDA3>;
-				output-low;
-				bias-pull-up = <55>;
-			};
-
-			pins3 {
-				pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>,
-					 <MT8135_PIN_60_JTDI__FUNC_JTDI>;
-				drive-strength = <32>;
-			};
-		};
-
-		...
-	}
-};

Documentation/devicetree/bindings/pinctrl/pinctrl-mt6797.txt

-* MediaTek MT6797 Pin Controller
-
-The MediaTek's MT6797 Pin controller is used to control SoC pins.
-
-Required properties:
-- compatible: Value should be one of the following.
-              "mediatek,mt6797-pinctrl", compatible with mt6797 pinctrl.
-- reg:        Should contain address and size for gpio, iocfgl, iocfgb,
-              iocfgr and iocfgt register bases.
-- reg-names:  An array of strings describing the "reg" entries. Must
-              contain "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt".
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be two. The first cell is the gpio pin number
-               and the second cell is used for optional parameters.
-
-Optional properties:
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two.
-- interrupts : The interrupt outputs from the controller.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices.
-
-Subnode format
-A pinctrl node should contain at least one subnodes representing the
-pinctrl groups available on the machine. Each subnode will list the
-pins it needs, and how they should be configured, with regard to muxer
-configuration, pullups, drive strength, input enable/disable and input schmitt.
-
-    node {
-        pinmux = <PIN_NUMBER_PINMUX>;
-        GENERIC_PINCONFIG;
-    };
-
-Required properties:
-- pinmux: Integer array, represents gpio pin number and mux setting.
-    Supported pin number and mux varies for different SoCs, and are defined
-    as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
-
-Optional properties:
-- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable,
-    bias-pull, bias-pull-down, input-enable, input-schmitt-enable,
-    input-schmitt-disable, output-enable output-low, output-high,
-    drive-strength, and slew-rate are valid.
-
-    Valid arguments for 'slew-rate' are '0' for no slew rate controlled and
-    '1' for slower slew rate respectively. Valid arguments for 'drive-strength'
-    is limited, such as 2, 4, 8, 12, or 16 in mA.
-
-    Some optional vendor properties as defined are valid to specify in a
-    pinconf subnode:
-    - mediatek,tdsel: An integer describing the steps for output level shifter
-      duty cycle when asserted (high pulse width adjustment). Valid arguments
-      are from 0 to 15.
-    - mediatek,rdsel: An integer describing the steps for input level shifter
-      duty cycle when asserted (high pulse width adjustment). Valid arguments
-      are from 0 to 63.
-    - mediatek,pull-up-adv: An integer describing the code R1R0 as 0, 1, 2
-      or 3 for the advanced pull-up resistors.
-    - mediatek,pull-down-adv: An integer describing the code R1R0 as 0, 1, 2,
-      or 3 for the advanced pull-down resistors.
-
-Examples:
-
-        pio: pinctrl@10005000 {
-                compatible = "mediatek,mt6797-pinctrl";
-                reg = <0 0x10005000 0 0x1000>,
-                      <0 0x10002000 0 0x400>,
-                      <0 0x10002400 0 0x400>,
-                      <0 0x10002800 0 0x400>,
-                      <0 0x10002C00 0 0x400>;
-                reg-names = "gpio", "iocfgl", "iocfgb",
-                            "iocfgr", "iocfgt";
-                gpio-controller;
-                #gpio-cells = <2>;
-
-                uart1_pins_a: uart1 {
-                        pins1 {
-                                pinmux = <MT6797_GPIO232__FUNC_URXD1>,
-                                         <MT6797_GPIO233__FUNC_UTXD1>;
-                        };
-                };
-        };

Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt

-* Mediatek MT8183 Pin Controller
-
-The Mediatek's Pin controller is used to control SoC pins.
-
-Required properties:
-- compatible: value should be one of the following.
-	"mediatek,mt8183-pinctrl", compatible with mt8183 pinctrl.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
-  binding is used, the amount of cells must be specified as 2. See the below
-  mentioned gpio binding representation for description of particular cells.
-- gpio-ranges : gpio valid number range.
-- reg: physical address base for gpio base registers. There are 10 GPIO
-  physical address base in mt8183.
-
-Optional properties:
-- reg-names: gpio base register names. There are 10 gpio base register
-  names in mt8183. They are "iocfg0", "iocfg1", "iocfg2", "iocfg3", "iocfg4",
-  "iocfg5", "iocfg6", "iocfg7", "iocfg8", "eint".
-- interrupt-controller: Marks the device node as an interrupt controller
-- #interrupt-cells: Should be two.
-- interrupts : The interrupt outputs to sysirq.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices.
-
-Subnode format
-A pinctrl node should contain at least one subnodes representing the
-pinctrl groups available on the machine. Each subnode will list the
-pins it needs, and how they should be configured, with regard to muxer
-configuration, pullups, drive strength, input enable/disable and input schmitt.
-
-    node {
-	pinmux = <PIN_NUMBER_PINMUX>;
-	GENERIC_PINCONFIG;
-    };
-
-Required properties:
-- pinmux: integer array, represents gpio pin number and mux setting.
-    Supported pin number and mux varies for different SoCs, and are defined
-    as macros in boot/dts/<soc>-pinfunc.h directly.
-
-Optional properties:
-- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable,
-    bias-pull-down, bias-pull-up, input-enable, input-disable, output-low,
-    output-high, input-schmitt-enable, input-schmitt-disable
-    and drive-strength are valid.
-
-    Some special pins have extra pull up strength, there are R0 and R1 pull-up
-    resistors available, but for user, it's only need to set R1R0 as 00, 01,
-    10 or 11. So It needs config "mediatek,pull-up-adv" or
-    "mediatek,pull-down-adv" to support arguments for those special pins.
-    Valid arguments are from 0 to 3.
-
-    mediatek,tdsel: An integer describing the steps for output level shifter
-      duty cycle when asserted (high pulse width adjustment). Valid arguments
-      are from 0 to 15.
-    mediatek,rdsel: An integer describing the steps for input level shifter
-      duty cycle when asserted (high pulse width adjustment). Valid arguments
-      are from 0 to 63.
-
-    When config drive-strength, it can support some arguments, such as
-    MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h.
-    It can only support 2/4/6/8/10/12/14/16mA in mt8183.
-    For I2C pins, there are existing generic driving setup and the specific
-    driving setup. I2C pins can only support 2/4/6/8/10/12/14/16mA driving
-    adjustment in generic driving setup. But in specific driving setup,
-    they can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
-    driving setup for I2C pins, the existing generic driving setup will be
-    disabled. For some special features, we need the I2C pins specific
-    driving setup. The specific driving setup is controlled by E1E0EN.
-    So we need add extra vendor driving preperty instead of
-    the generic driving property.
-    We can add "mediatek,drive-strength-adv = <XXX>;" to describe the specific
-    driving setup property. "XXX" means the value of E1E0EN. EN is 0 or 1.
-    It is used to enable or disable the specific driving setup.
-    E1E0 is used to describe the detail strength specification of the I2C pin.
-    When E1=0/E0=0, the strength is 0.125mA.
-    When E1=0/E0=1, the strength is 0.25mA.
-    When E1=1/E0=0, the strength is 0.5mA.
-    When E1=1/E0=1, the strength is 1mA.
-    So the valid arguments of "mediatek,drive-strength-adv" are from 0 to 7.
-
-Examples:
-
-#include "mt8183-pinfunc.h"
-
-...
-{
-	pio: pinctrl@10005000 {
-		compatible = "mediatek,mt8183-pinctrl";
-		reg = <0 0x10005000 0 0x1000>,
-		      <0 0x11f20000 0 0x1000>,
-		      <0 0x11e80000 0 0x1000>,
-		      <0 0x11e70000 0 0x1000>,
-		      <0 0x11e90000 0 0x1000>,
-		      <0 0x11d30000 0 0x1000>,
-		      <0 0x11d20000 0 0x1000>,
-		      <0 0x11c50000 0 0x1000>,
-		      <0 0x11f30000 0 0x1000>,
-		      <0 0x1000b000 0 0x1000>;
-		reg-names = "iocfg0", "iocfg1", "iocfg2",
-			    "iocfg3", "iocfg4", "iocfg5",
-			    "iocfg6", "iocfg7", "iocfg8",
-			    "eint";
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&pio 0 0 192>;
-		interrupt-controller;
-		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-
-		i2c0_pins_a: i2c0 {
-			pins1 {
-				pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
-					 <PINMUX_GPIO49__FUNC_SDA5>;
-				mediatek,pull-up-adv = <3>;
-				mediatek,drive-strength-adv = <7>;
-			};
-		};
-
-		i2c1_pins_a: i2c1 {
-			pins {
-				pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
-					 <PINMUX_GPIO51__FUNC_SDA3>;
-				mediatek,pull-down-adv = <2>;
-				mediatek,drive-strength-adv = <4>;
-			};
-		};
-		...
-	};
-};

MAINTAINERS

@@ -14639,8 +14639,10 @@ PIN CONTROLLER - MEDIATEK
 M:	Sean Wang <sean.wang@kernel.org>
 L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
-F:	Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
+F:	Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
+F:	Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
+F:	Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
+F:	Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
 F:	drivers/pinctrl/mediatek/
 
 PIN CONTROLLER - MICROCHIP AT91

arch/arm/boot/dts/mt8135.dtsi

@@ -9,7 +9,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/mt8135-resets.h>
-#include "mt8135-pinfunc.h"
+#include <dt-bindings/pinctrl/mt8135-pinfunc.h>
 
 / {
 	#address-cells = <2>;

arch/arm64/boot/dts/mediatek/mt8183.dtsi

@@ -14,7 +14,7 @@
 #include <dt-bindings/reset-controller/mt8183-resets.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/thermal/thermal.h>
-#include "mt8183-pinfunc.h"
+#include <dt-bindings/pinctrl/mt8183-pinfunc.h>
 
 / {
 	compatible = "mediatek,mt8183";