Commit 37b83046 authored by Nicolas Pitre's avatar Nicolas Pitre Committed by Nicolas Pitre

ARM: kuser: move interface documentation out of the source code

Digging into some assembly file in order to get information about the
kuser helpers is not that convivial.  Let's move that information to
a better formatted file in Documentation/arm/ and improve on it a bit.

Thanks to Dave Martin <dave.martin@linaro.org> for the initial cleanup and
clarifications.
Signed-off-by: default avatarNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: default avatarDave Martin <dave.martin@linaro.org>
parent 2c53b436
Kernel-provided User Helpers
============================
These are segment of kernel provided user code reachable from user space
at a fixed address in kernel memory. This is used to provide user space
with some operations which require kernel help because of unimplemented
native feature and/or instructions in many ARM CPUs. The idea is for this
code to be executed directly in user mode for best efficiency but which is
too intimate with the kernel counter part to be left to user libraries.
In fact this code might even differ from one CPU to another depending on
the available instruction set, or whether it is a SMP systems. In other
words, the kernel reserves the right to change this code as needed without
warning. Only the entry points and their results as documented here are
guaranteed to be stable.
This is different from (but doesn't preclude) a full blown VDSO
implementation, however a VDSO would prevent some assembly tricks with
constants that allows for efficient branching to those code segments. And
since those code segments only use a few cycles before returning to user
code, the overhead of a VDSO indirect far call would add a measurable
overhead to such minimalistic operations.
User space is expected to bypass those helpers and implement those things
inline (either in the code emitted directly by the compiler, or part of
the implementation of a library call) when optimizing for a recent enough
processor that has the necessary native support, but only if resulting
binaries are already to be incompatible with earlier ARM processors due to
useage of similar native instructions for other things. In other words
don't make binaries unable to run on earlier processors just for the sake
of not using these kernel helpers if your compiled code is not going to
use new instructions for other purpose.
New helpers may be added over time, so an older kernel may be missing some
helpers present in a newer kernel. For this reason, programs must check
the value of __kuser_helper_version (see below) before assuming that it is
safe to call any particular helper. This check should ideally be
performed only once at process startup time, and execution aborted early
if the required helpers are not provided by the kernel version that
process is running on.
kuser_helper_version
--------------------
Location: 0xffff0ffc
Reference declaration:
extern int32_t __kuser_helper_version;
Definition:
This field contains the number of helpers being implemented by the
running kernel. User space may read this to determine the availability
of a particular helper.
Usage example:
#define __kuser_helper_version (*(int32_t *)0xffff0ffc)
void check_kuser_version(void)
{
if (__kuser_helper_version < 2) {
fprintf(stderr, "can't do atomic operations, kernel too old\n");
abort();
}
}
Notes:
User space may assume that the value of this field never changes
during the lifetime of any single process. This means that this
field can be read once during the initialisation of a library or
startup phase of a program.
kuser_get_tls
-------------
Location: 0xffff0fe0
Reference prototype:
void * __kuser_get_tls(void);
Input:
lr = return address
Output:
r0 = TLS value
Clobbered registers:
none
Definition:
Get the TLS value as previously set via the __ARM_NR_set_tls syscall.
Usage example:
typedef void * (__kuser_get_tls_t)(void);
#define __kuser_get_tls (*(__kuser_get_tls_t *)0xffff0fe0)
void foo()
{
void *tls = __kuser_get_tls();
printf("TLS = %p\n", tls);
}
Notes:
- Valid only if __kuser_helper_version >= 1 (from kernel version 2.6.12).
kuser_cmpxchg
-------------
Location: 0xffff0fc0
Reference prototype:
int __kuser_cmpxchg(int32_t oldval, int32_t newval, volatile int32_t *ptr);
Input:
r0 = oldval
r1 = newval
r2 = ptr
lr = return address
Output:
r0 = success code (zero or non-zero)
C flag = set if r0 == 0, clear if r0 != 0
Clobbered registers:
r3, ip, flags
Definition:
Atomically store newval in *ptr only if *ptr is equal to oldval.
Return zero if *ptr was changed or non-zero if no exchange happened.
The C flag is also set if *ptr was changed to allow for assembly
optimization in the calling code.
Usage example:
typedef int (__kuser_cmpxchg_t)(int oldval, int newval, volatile int *ptr);
#define __kuser_cmpxchg (*(__kuser_cmpxchg_t *)0xffff0fc0)
int atomic_add(volatile int *ptr, int val)
{
int old, new;
do {
old = *ptr;
new = old + val;
} while(__kuser_cmpxchg(old, new, ptr));
return new;
}
Notes:
- This routine already includes memory barriers as needed.
- Valid only if __kuser_helper_version >= 2 (from kernel version 2.6.12).
kuser_memory_barrier
--------------------
Location: 0xffff0fa0
Reference prototype:
void __kuser_memory_barrier(void);
Input:
lr = return address
Output:
none
Clobbered registers:
none
Definition:
Apply any needed memory barrier to preserve consistency with data modified
manually and __kuser_cmpxchg usage.
Usage example:
typedef void (__kuser_dmb_t)(void);
#define __kuser_dmb (*(__kuser_dmb_t *)0xffff0fa0)
Notes:
- Valid only if __kuser_helper_version >= 3 (from kernel version 2.6.15).
...@@ -754,31 +754,12 @@ ENDPROC(__switch_to) ...@@ -754,31 +754,12 @@ ENDPROC(__switch_to)
/* /*
* User helpers. * User helpers.
* *
* These are segment of kernel provided user code reachable from user space
* at a fixed address in kernel memory. This is used to provide user space
* with some operations which require kernel help because of unimplemented
* native feature and/or instructions in many ARM CPUs. The idea is for
* this code to be executed directly in user mode for best efficiency but
* which is too intimate with the kernel counter part to be left to user
* libraries. In fact this code might even differ from one CPU to another
* depending on the available instruction set and restrictions like on
* SMP systems. In other words, the kernel reserves the right to change
* this code as needed without warning. Only the entry points and their
* results are guaranteed to be stable.
*
* Each segment is 32-byte aligned and will be moved to the top of the high * Each segment is 32-byte aligned and will be moved to the top of the high
* vector page. New segments (if ever needed) must be added in front of * vector page. New segments (if ever needed) must be added in front of
* existing ones. This mechanism should be used only for things that are * existing ones. This mechanism should be used only for things that are
* really small and justified, and not be abused freely. * really small and justified, and not be abused freely.
* *
* User space is expected to implement those things inline when optimizing * See Documentation/arm/kernel_user_helpers.txt for formal definitions.
* for a processor that has the necessary native support, but only if such
* resulting binaries are already to be incompatible with earlier ARM
* processors due to the use of unsupported instructions other than what
* is provided here. In other words don't make binaries unable to run on
* earlier processors just for the sake of not using these kernel helpers
* if your compiled code is not going to use the new instructions for other
* purpose.
*/ */
THUMB( .arm ) THUMB( .arm )
...@@ -794,98 +775,12 @@ ENDPROC(__switch_to) ...@@ -794,98 +775,12 @@ ENDPROC(__switch_to)
.globl __kuser_helper_start .globl __kuser_helper_start
__kuser_helper_start: __kuser_helper_start:
/*
* Reference prototype:
*
* void __kernel_memory_barrier(void)
*
* Input:
*
* lr = return address
*
* Output:
*
* none
*
* Clobbered:
*
* none
*
* Definition and user space usage example:
*
* typedef void (__kernel_dmb_t)(void);
* #define __kernel_dmb (*(__kernel_dmb_t *)0xffff0fa0)
*
* Apply any needed memory barrier to preserve consistency with data modified
* manually and __kuser_cmpxchg usage.
*
* This could be used as follows:
*
* #define __kernel_dmb() \
* asm volatile ( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #95" \
* : : : "r0", "lr","cc" )
*/
__kuser_memory_barrier: @ 0xffff0fa0 __kuser_memory_barrier: @ 0xffff0fa0
smp_dmb arm smp_dmb arm
usr_ret lr usr_ret lr
.align 5 .align 5
/*
* Reference prototype:
*
* int __kernel_cmpxchg(int oldval, int newval, int *ptr)
*
* Input:
*
* r0 = oldval
* r1 = newval
* r2 = ptr
* lr = return address
*
* Output:
*
* r0 = returned value (zero or non-zero)
* C flag = set if r0 == 0, clear if r0 != 0
*
* Clobbered:
*
* r3, ip, flags
*
* Definition and user space usage example:
*
* typedef int (__kernel_cmpxchg_t)(int oldval, int newval, int *ptr);
* #define __kernel_cmpxchg (*(__kernel_cmpxchg_t *)0xffff0fc0)
*
* Atomically store newval in *ptr if *ptr is equal to oldval for user space.
* Return zero if *ptr was changed or non-zero if no exchange happened.
* The C flag is also set if *ptr was changed to allow for assembly
* optimization in the calling code.
*
* Notes:
*
* - This routine already includes memory barriers as needed.
*
* For example, a user space atomic_add implementation could look like this:
*
* #define atomic_add(ptr, val) \
* ({ register unsigned int *__ptr asm("r2") = (ptr); \
* register unsigned int __result asm("r1"); \
* asm volatile ( \
* "1: @ atomic_add\n\t" \
* "ldr r0, [r2]\n\t" \
* "mov r3, #0xffff0fff\n\t" \
* "add lr, pc, #4\n\t" \
* "add r1, r0, %2\n\t" \
* "add pc, r3, #(0xffff0fc0 - 0xffff0fff)\n\t" \
* "bcc 1b" \
* : "=&r" (__result) \
* : "r" (__ptr), "rIL" (val) \
* : "r0","r3","ip","lr","cc","memory" ); \
* __result; })
*/
__kuser_cmpxchg: @ 0xffff0fc0 __kuser_cmpxchg: @ 0xffff0fc0
#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) #if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
...@@ -959,39 +854,6 @@ kuser_cmpxchg_fixup: ...@@ -959,39 +854,6 @@ kuser_cmpxchg_fixup:
.align 5 .align 5
/*
* Reference prototype:
*
* int __kernel_get_tls(void)
*
* Input:
*
* lr = return address
*
* Output:
*
* r0 = TLS value
*
* Clobbered:
*
* none
*
* Definition and user space usage example:
*
* typedef int (__kernel_get_tls_t)(void);
* #define __kernel_get_tls (*(__kernel_get_tls_t *)0xffff0fe0)
*
* Get the TLS value as previously set via the __ARM_NR_set_tls syscall.
*
* This could be used as follows:
*
* #define __kernel_get_tls() \
* ({ register unsigned int __val asm("r0"); \
* asm( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #31" \
* : "=r" (__val) : : "lr","cc" ); \
* __val; })
*/
__kuser_get_tls: @ 0xffff0fe0 __kuser_get_tls: @ 0xffff0fe0
ldr r0, [pc, #(16 - 8)] @ read TLS, set in kuser_get_tls_init ldr r0, [pc, #(16 - 8)] @ read TLS, set in kuser_get_tls_init
usr_ret lr usr_ret lr
...@@ -1000,19 +862,6 @@ __kuser_get_tls: @ 0xffff0fe0 ...@@ -1000,19 +862,6 @@ __kuser_get_tls: @ 0xffff0fe0
.word 0 @ 0xffff0ff0 software TLS value, then .word 0 @ 0xffff0ff0 software TLS value, then
.endr @ pad up to __kuser_helper_version .endr @ pad up to __kuser_helper_version
/*
* Reference declaration:
*
* extern unsigned int __kernel_helper_version;
*
* Definition and user space usage example:
*
* #define __kernel_helper_version (*(unsigned int *)0xffff0ffc)
*
* User space may read this to determine the curent number of helpers
* available.
*/
__kuser_helper_version: @ 0xffff0ffc __kuser_helper_version: @ 0xffff0ffc
.word ((__kuser_helper_end - __kuser_helper_start) >> 5) .word ((__kuser_helper_end - __kuser_helper_start) >> 5)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment