[media] board-dm646x-evm.c: wrong register used in setup_vpif_input_channel_mode

The function setup_vpif_input_channel_mode() used the VSCLKDIS register
instead of VIDCLKCTL. This meant that when in HD mode videoport channel 0
used a different clock from channel 1.

Clearly a copy-and-paste error.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -564,7 +564,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
 	int val;
 	u32 value;
 
-	if (!vpif_vsclkdis_reg || !cpld_client)
+	if (!vpif_vidclkctl_reg || !cpld_client)
 		return -ENXIO;
 
 	val = i2c_smbus_read_byte(cpld_client);
@@ -572,7 +572,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
 		return val;
 
 	spin_lock_irqsave(&vpif_reg_lock, flags);
-	value = __raw_readl(vpif_vsclkdis_reg);
+	value = __raw_readl(vpif_vidclkctl_reg);
 	if (mux_mode) {
 		val &= VPIF_INPUT_TWO_CHANNEL;
 		value |= VIDCH1CLK;
@@ -580,7 +580,7 @@ static int setup_vpif_input_channel_mode(int mux_mode)
 		val |= VPIF_INPUT_ONE_CHANNEL;
 		value &= ~VIDCH1CLK;
 	}
-	__raw_writel(value, vpif_vsclkdis_reg);
+	__raw_writel(value, vpif_vidclkctl_reg);
 	spin_unlock_irqrestore(&vpif_reg_lock, flags);
 
 	err = i2c_smbus_write_byte(cpld_client, val);