media: cec: call enable_adap on s_log_addrs
Don't enable/disable the adapter if the first fh is opened or the last fh is closed, instead do this when the adapter is configured or unconfigured, and also when we enter Monitor All or Monitor Pin mode for the first time or we exit the Monitor All/Pin mode for the last time. However, if needs_hpd is true, then do this when the physical address is set or cleared: in that case the adapter typically is powered by the HPD, so it really is disabled when the HPD is low. This case (needs_hpd is true) was already handled in this way, so this wasn't changed. The problem with the old behavior was that if the HPD goes low when no fh is open, and a transmit was in progress, then the adapter would be disabled, typically stopping the transmit immediately which leaves a partial message on the bus, which isn't nice and can confuse some adapters. It makes much more sense to disable it only when the adapter is unconfigured and we're not monitoring the bus, since then you really won't be using it anymore. To keep track of this store a CEC activation count and call adap_enable only when it goes from 0 to 1 or back to 0. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Showing
Please register or sign in to comment