Commit 386b3849 authored by Dmitry Torokhov's avatar Dmitry Torokhov

Input: i8042 - use boolean type where it makes sense

Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent 5ddbc77c
......@@ -550,9 +550,9 @@ static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = {
#ifdef CONFIG_PNP
#include <linux/pnp.h>
static int i8042_pnp_kbd_registered;
static bool i8042_pnp_kbd_registered;
static unsigned int i8042_pnp_kbd_devices;
static int i8042_pnp_aux_registered;
static bool i8042_pnp_aux_registered;
static unsigned int i8042_pnp_aux_devices;
static int i8042_pnp_command_reg;
......@@ -640,12 +640,12 @@ static struct pnp_driver i8042_pnp_aux_driver = {
static void i8042_pnp_exit(void)
{
if (i8042_pnp_kbd_registered) {
i8042_pnp_kbd_registered = 0;
i8042_pnp_kbd_registered = false;
pnp_unregister_driver(&i8042_pnp_kbd_driver);
}
if (i8042_pnp_aux_registered) {
i8042_pnp_aux_registered = 0;
i8042_pnp_aux_registered = false;
pnp_unregister_driver(&i8042_pnp_aux_driver);
}
}
......@@ -653,12 +653,12 @@ static void i8042_pnp_exit(void)
static int __init i8042_pnp_init(void)
{
char kbd_irq_str[4] = { 0 }, aux_irq_str[4] = { 0 };
int pnp_data_busted = 0;
int pnp_data_busted = false;
int err;
#ifdef CONFIG_X86
if (dmi_check_system(i8042_dmi_nopnp_table))
i8042_nopnp = 1;
i8042_nopnp = true;
#endif
if (i8042_nopnp) {
......@@ -668,11 +668,11 @@ static int __init i8042_pnp_init(void)
err = pnp_register_driver(&i8042_pnp_kbd_driver);
if (!err)
i8042_pnp_kbd_registered = 1;
i8042_pnp_kbd_registered = true;
err = pnp_register_driver(&i8042_pnp_aux_driver);
if (!err)
i8042_pnp_aux_registered = 1;
i8042_pnp_aux_registered = true;
if (!i8042_pnp_kbd_devices && !i8042_pnp_aux_devices) {
i8042_pnp_exit();
......@@ -700,9 +700,9 @@ static int __init i8042_pnp_init(void)
#if defined(__ia64__)
if (!i8042_pnp_kbd_devices)
i8042_nokbd = 1;
i8042_nokbd = true;
if (!i8042_pnp_aux_devices)
i8042_noaux = 1;
i8042_noaux = true;
#endif
if (((i8042_pnp_data_reg & ~0xf) == (i8042_data_reg & ~0xf) &&
......@@ -713,7 +713,7 @@ static int __init i8042_pnp_init(void)
"using default %#x\n",
i8042_pnp_data_reg, i8042_data_reg);
i8042_pnp_data_reg = i8042_data_reg;
pnp_data_busted = 1;
pnp_data_busted = true;
}
if (((i8042_pnp_command_reg & ~0xf) == (i8042_command_reg & ~0xf) &&
......@@ -724,7 +724,7 @@ static int __init i8042_pnp_init(void)
"using default %#x\n",
i8042_pnp_command_reg, i8042_command_reg);
i8042_pnp_command_reg = i8042_command_reg;
pnp_data_busted = 1;
pnp_data_busted = true;
}
if (!i8042_nokbd && !i8042_pnp_kbd_irq) {
......@@ -732,7 +732,7 @@ static int __init i8042_pnp_init(void)
"PNP: PS/2 controller doesn't have KBD irq; "
"using default %d\n", i8042_kbd_irq);
i8042_pnp_kbd_irq = i8042_kbd_irq;
pnp_data_busted = 1;
pnp_data_busted = true;
}
if (!i8042_noaux && !i8042_pnp_aux_irq) {
......@@ -741,7 +741,7 @@ static int __init i8042_pnp_init(void)
"PNP: PS/2 appears to have AUX port disabled, "
"if this is incorrect please boot with "
"i8042.nopnp\n");
i8042_noaux = 1;
i8042_noaux = true;
} else {
printk(KERN_WARNING
"PNP: PS/2 controller doesn't have AUX irq; "
......@@ -788,21 +788,21 @@ static int __init i8042_platform_init(void)
return retval;
#if defined(__ia64__)
i8042_reset = 1;
i8042_reset = true;
#endif
#ifdef CONFIG_X86
if (dmi_check_system(i8042_dmi_reset_table))
i8042_reset = 1;
i8042_reset = true;
if (dmi_check_system(i8042_dmi_noloop_table))
i8042_noloop = 1;
i8042_noloop = true;
if (dmi_check_system(i8042_dmi_nomux_table))
i8042_nomux = 1;
i8042_nomux = true;
if (dmi_check_system(i8042_dmi_dritek_table))
i8042_dritek = 1;
i8042_dritek = true;
#endif /* CONFIG_X86 */
return retval;
......
......@@ -28,35 +28,35 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
MODULE_DESCRIPTION("i8042 keyboard and mouse controller driver");
MODULE_LICENSE("GPL");
static unsigned int i8042_nokbd;
static bool i8042_nokbd;
module_param_named(nokbd, i8042_nokbd, bool, 0);
MODULE_PARM_DESC(nokbd, "Do not probe or use KBD port.");
static unsigned int i8042_noaux;
static bool i8042_noaux;
module_param_named(noaux, i8042_noaux, bool, 0);
MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port.");
static unsigned int i8042_nomux;
static bool i8042_nomux;
module_param_named(nomux, i8042_nomux, bool, 0);
MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing conrtoller is present.");
static unsigned int i8042_unlock;
static bool i8042_unlock;
module_param_named(unlock, i8042_unlock, bool, 0);
MODULE_PARM_DESC(unlock, "Ignore keyboard lock.");
static unsigned int i8042_reset;
static bool i8042_reset;
module_param_named(reset, i8042_reset, bool, 0);
MODULE_PARM_DESC(reset, "Reset controller during init and cleanup.");
static unsigned int i8042_direct;
static bool i8042_direct;
module_param_named(direct, i8042_direct, bool, 0);
MODULE_PARM_DESC(direct, "Put keyboard port into non-translated mode.");
static unsigned int i8042_dumbkbd;
static bool i8042_dumbkbd;
module_param_named(dumbkbd, i8042_dumbkbd, bool, 0);
MODULE_PARM_DESC(dumbkbd, "Pretend that controller can only read data from keyboard");
static unsigned int i8042_noloop;
static bool i8042_noloop;
module_param_named(noloop, i8042_noloop, bool, 0);
MODULE_PARM_DESC(noloop, "Disable the AUX Loopback command while probing for the AUX port");
......@@ -65,20 +65,20 @@ module_param_named(panicblink, i8042_blink_frequency, uint, 0600);
MODULE_PARM_DESC(panicblink, "Frequency with which keyboard LEDs should blink when kernel panics");
#ifdef CONFIG_X86
static unsigned int i8042_dritek;
static bool i8042_dritek;
module_param_named(dritek, i8042_dritek, bool, 0);
MODULE_PARM_DESC(dritek, "Force enable the Dritek keyboard extension");
#endif
#ifdef CONFIG_PNP
static int i8042_nopnp;
static bool i8042_nopnp;
module_param_named(nopnp, i8042_nopnp, bool, 0);
MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings");
#endif
#define DEBUG
#ifdef DEBUG
static int i8042_debug;
static bool i8042_debug;
module_param_named(debug, i8042_debug, bool, 0600);
MODULE_PARM_DESC(debug, "Turn i8042 debugging mode on and off");
#endif
......@@ -92,7 +92,7 @@ static DEFINE_SPINLOCK(i8042_lock);
struct i8042_port {
struct serio *serio;
int irq;
unsigned char exists;
bool exists;
signed char mux;
};
......@@ -105,9 +105,9 @@ static struct i8042_port i8042_ports[I8042_NUM_PORTS];
static unsigned char i8042_initial_ctr;
static unsigned char i8042_ctr;
static unsigned char i8042_mux_present;
static unsigned char i8042_kbd_irq_registered;
static unsigned char i8042_aux_irq_registered;
static bool i8042_mux_present;
static bool i8042_kbd_irq_registered;
static bool i8042_aux_irq_registered;
static unsigned char i8042_suppress_kbd_ack;
static struct platform_device *i8042_platform_device;
......@@ -316,7 +316,7 @@ static int i8042_start(struct serio *serio)
{
struct i8042_port *port = serio->port_data;
port->exists = 1;
port->exists = true;
mb();
return 0;
}
......@@ -330,7 +330,7 @@ static void i8042_stop(struct serio *serio)
{
struct i8042_port *port = serio->port_data;
port->exists = 0;
port->exists = false;
/*
* We synchronize with both AUX and KBD IRQs because there is
......@@ -492,14 +492,15 @@ static int i8042_enable_mux_ports(void)
}
/*
* i8042_set_mux_mode checks whether the controller has an active
* multiplexor and puts the chip into Multiplexed (1) or Legacy (0) mode.
* i8042_set_mux_mode checks whether the controller has an
* active multiplexor and puts the chip into Multiplexed (true)
* or Legacy (false) mode.
*/
static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version)
static int i8042_set_mux_mode(bool multiplex, unsigned char *mux_version)
{
unsigned char param;
unsigned char param, val;
/*
* Get rid of bytes in the queue.
*/
......@@ -511,14 +512,21 @@ static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version)
* mouse interface, the last should be version.
*/
param = 0xf0;
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0xf0)
param = val = 0xf0;
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != val)
return -1;
param = val = multiplex ? 0x56 : 0xf6;
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != val)
return -1;
param = mode ? 0x56 : 0xf6;
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != (mode ? 0x56 : 0xf6))
param = val = multiplex ? 0xa4 : 0xa5;
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == val)
return -1;
param = mode ? 0xa4 : 0xa5;
if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == (mode ? 0xa4 : 0xa5))
/*
* Workaround for interference with USB Legacy emulation
* that causes a v10.12 MUX to be found.
*/
if (param == 0xac)
return -1;
if (mux_version)
......@@ -537,14 +545,7 @@ static int __devinit i8042_check_mux(void)
{
unsigned char mux_version;
if (i8042_set_mux_mode(1, &mux_version))
return -1;
/*
* Workaround for interference with USB Legacy emulation
* that causes a v10.12 MUX to be found.
*/
if (mux_version == 0xAC)
if (i8042_set_mux_mode(true, &mux_version))
return -1;
printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
......@@ -561,7 +562,7 @@ static int __devinit i8042_check_mux(void)
return -EIO;
}
i8042_mux_present = 1;
i8042_mux_present = true;
return 0;
}
......@@ -570,7 +571,7 @@ static int __devinit i8042_check_mux(void)
* The following is used to test AUX IRQ delivery.
*/
static struct completion i8042_aux_irq_delivered __devinitdata;
static int i8042_irq_being_tested __devinitdata;
static bool i8042_irq_being_tested __devinitdata;
static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id)
{
......@@ -597,7 +598,7 @@ static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id)
* verifies success by readinng CTR. Used when testing for presence of AUX
* port.
*/
static int __devinit i8042_toggle_aux(int on)
static int __devinit i8042_toggle_aux(bool on)
{
unsigned char param;
int i;
......@@ -628,8 +629,8 @@ static int __devinit i8042_toggle_aux(int on)
static int __devinit i8042_check_aux(void)
{
int retval = -1;
int irq_registered = 0;
int aux_loop_broken = 0;
bool irq_registered = false;
bool aux_loop_broken = false;
unsigned long flags;
unsigned char param;
......@@ -666,19 +667,19 @@ static int __devinit i8042_check_aux(void)
* mark it as broken
*/
if (!retval)
aux_loop_broken = 1;
aux_loop_broken = true;
}
/*
* Bit assignment test - filters out PS/2 i8042's in AT mode
*/
if (i8042_toggle_aux(0)) {
if (i8042_toggle_aux(false)) {
printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n");
}
if (i8042_toggle_aux(1))
if (i8042_toggle_aux(true))
return -1;
/*
......@@ -699,7 +700,7 @@ static int __devinit i8042_check_aux(void)
"i8042", i8042_platform_device))
goto out;
irq_registered = 1;
irq_registered = true;
if (i8042_enable_aux_port())
goto out;
......@@ -707,7 +708,7 @@ static int __devinit i8042_check_aux(void)
spin_lock_irqsave(&i8042_lock, flags);
init_completion(&i8042_aux_irq_delivered);
i8042_irq_being_tested = 1;
i8042_irq_being_tested = true;
param = 0xa5;
retval = __i8042_command(&param, I8042_CMD_AUX_LOOP & 0xf0ff);
......@@ -844,7 +845,7 @@ static int i8042_controller_init(void)
*/
if (~i8042_ctr & I8042_CTR_XLATE)
i8042_direct = 1;
i8042_direct = true;
/*
* Set nontranslated mode for the kbd interface if requested by an option.
......@@ -892,7 +893,7 @@ static void i8042_controller_reset(void)
*/
if (i8042_mux_present)
i8042_set_mux_mode(0, NULL);
i8042_set_mux_mode(false, NULL);
/*
* Reset the controller if requested.
......@@ -1025,7 +1026,7 @@ static int i8042_pm_restore(struct device *dev)
#endif
if (i8042_mux_present) {
if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
if (i8042_set_mux_mode(true, NULL) || i8042_enable_mux_ports())
printk(KERN_WARNING
"i8042: failed to resume active multiplexor, "
"mouse won't work.\n");
......@@ -1167,7 +1168,7 @@ static void i8042_free_irqs(void)
if (i8042_kbd_irq_registered)
free_irq(I8042_KBD_IRQ, i8042_platform_device);
i8042_aux_irq_registered = i8042_kbd_irq_registered = 0;
i8042_aux_irq_registered = i8042_kbd_irq_registered = false;
}
static int __devinit i8042_setup_aux(void)
......@@ -1201,7 +1202,7 @@ static int __devinit i8042_setup_aux(void)
if (aux_enable())
goto err_free_irq;
i8042_aux_irq_registered = 1;
i8042_aux_irq_registered = true;
return 0;
err_free_irq:
......@@ -1228,7 +1229,7 @@ static int __devinit i8042_setup_kbd(void)
if (error)
goto err_free_irq;
i8042_kbd_irq_registered = 1;
i8042_kbd_irq_registered = true;
return 0;
err_free_irq:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment