Commit 389a6c52 authored by Kumar Gala's avatar Kumar Gala

powerpc/fsl: Update defconfigs to enable some standard FSL HW features

corenet64_smp_defconfig:
 - enabled rapidio

corenet32_smp_defconfig:
 - enabled hugetlbfs, rapidio

mpc85xx_smp_defconfig:
 - enabled P1010RDB, hugetlbfs, SPI, SDHC, Crypto/CAAM

mpc85xx_smp_defconfig:
 - enabled hugetlbfs, SPI, SDHC, Crypto/CAAM
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 22066949
......@@ -37,6 +37,8 @@ CONFIG_FSL_LBC=y
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEASPM is not set
CONFIG_RAPIDIO=y
CONFIG_FSL_RIO=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
......@@ -94,12 +96,11 @@ CONFIG_SATA_SIL24=y
CONFIG_SATA_SIL=y
CONFIG_PATA_SIL680=y
CONFIG_NETDEVICES=y
CONFIG_VITESSE_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_VITESSE_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
......
......@@ -23,6 +23,8 @@ CONFIG_P5020_DS=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=m
CONFIG_RAPIDIO=y
CONFIG_FSL_RIO=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
......@@ -57,7 +59,6 @@ CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_NET_ETHERNET=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
......
CONFIG_PPC_85xx=y
CONFIG_PHYS_64BIT=y
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
......@@ -93,15 +92,14 @@ CONFIG_SATA_FSL=y
CONFIG_PATA_ALI=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_FS_ENET=y
CONFIG_UCC_GETH=y
CONFIG_GIANFAR=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_FS_ENET=y
CONFIG_GIANFAR=y
CONFIG_UCC_GETH=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
......@@ -120,6 +118,9 @@ CONFIG_NVRAM=y
CONFIG_I2C=y
CONFIG_I2C_CPM=m
CONFIG_I2C_MPC=y
CONFIG_SPI=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_FSL_ESPI=y
CONFIG_GPIO_MPC8XXX=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
......@@ -163,6 +164,10 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_RTC_CLASS=y
......@@ -214,4 +219,5 @@ CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_CRYPTO_DEV_TALITOS=y
CONFIG_PPC_85xx=y
CONFIG_PHYS_64BIT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_EXPERIMENTAL=y
......@@ -26,6 +25,7 @@ CONFIG_MPC85xx_MDS=y
CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y
CONFIG_MPC85xx_RDB=y
CONFIG_P1010_RDB=y
CONFIG_P1022_DS=y
CONFIG_P1023_RDS=y
CONFIG_SOCRATES=y
......@@ -94,15 +94,14 @@ CONFIG_SATA_FSL=y
CONFIG_PATA_ALI=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_FS_ENET=y
CONFIG_UCC_GETH=y
CONFIG_GIANFAR=y
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_FS_ENET=y
CONFIG_GIANFAR=y
CONFIG_UCC_GETH=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
......@@ -121,6 +120,9 @@ CONFIG_NVRAM=y
CONFIG_I2C=y
CONFIG_I2C_CPM=m
CONFIG_I2C_MPC=y
CONFIG_SPI=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_FSL_ESPI=y
CONFIG_GPIO_MPC8XXX=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
......@@ -164,6 +166,10 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_RTC_CLASS=y
......@@ -215,4 +221,5 @@ CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DEV_FSL_CAAM=y
CONFIG_CRYPTO_DEV_TALITOS=y
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment