arch/tile: complete migration to new kmap_atomic scheme

This change makes KM_TYPE_NR independent of the actual deprecated
list of km_type values, which are no longer used in tile code anywhere.
For now we leave it set to 8, allowing that many nested mappings,
and thus reserving 32MB of address space.

A few remaining places using KM_* values were cleaned up as well.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

arch/tile/include/asm/highmem.h

@@ -23,7 +23,6 @@
 
 #include <linux/interrupt.h>
 #include <linux/threads.h>
-#include <asm/kmap_types.h>
 #include <asm/tlbflush.h>
 #include <asm/homecache.h>
 

arch/tile/include/asm/kmap_types.h

@@ -16,28 +16,42 @@
 #define _ASM_TILE_KMAP_TYPES_H
 
 /*
- * In TILE Linux each set of four of these uses another 16MB chunk of
- * address space, given 64 tiles and 64KB pages, so we only enable
- * ones that are required by the kernel configuration.
+ * In 32-bit TILE Linux we have to balance the desire to have a lot of
+ * nested atomic mappings with the fact that large page sizes and many
+ * processors chew up address space quickly.  In a typical
+ * 64-processor, 64KB-page layout build, making KM_TYPE_NR one larger
+ * adds 4MB of required address-space.  For now we leave KM_TYPE_NR
+ * set to depth 8.
  */
 enum km_type {
+	KM_TYPE_NR = 8
+};
+
+/*
+ * We provide dummy definitions of all the stray values that used to be
+ * required for kmap_atomic() and no longer are.
+ */
+enum {
 	KM_BOUNCE_READ,
 	KM_SKB_SUNRPC_DATA,
 	KM_SKB_DATA_SOFTIRQ,
 	KM_USER0,
 	KM_USER1,
 	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
 	KM_IRQ0,
 	KM_IRQ1,
 	KM_SOFTIRQ0,
 	KM_SOFTIRQ1,
-	KM_MEMCPY0,
-	KM_MEMCPY1,
-#if defined(CONFIG_HIGHPTE)
-	KM_PTE0,
-	KM_PTE1,
-#endif
-	KM_TYPE_NR
+	KM_SYNC_ICACHE,
+	KM_SYNC_DCACHE,
+	KM_UML_USERCOPY,
+	KM_IRQ_PTE,
+	KM_NMI,
+	KM_NMI_PTE,
+	KM_KDB
 };
 
 #endif /* _ASM_TILE_KMAP_TYPES_H */

arch/tile/include/asm/pgtable.h

@@ -344,10 +344,8 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 #define pgd_offset_k(address) pgd_offset(&init_mm, address)
 
 #if defined(CONFIG_HIGHPTE)
-extern pte_t *_pte_offset_map(pmd_t *, unsigned long address, enum km_type);
-#define pte_offset_map(dir, address) \
-	_pte_offset_map(dir, address, KM_PTE0)
-#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
+extern pte_t *pte_offset_map(pmd_t *, unsigned long address);
+#define pte_unmap(pte) kunmap_atomic(pte)
 #else
 #define pte_offset_map(dir, address) pte_offset_kernel(dir, address)
 #define pte_unmap(pte) do { } while (0)

arch/tile/kernel/machine_kexec.c

@@ -182,13 +182,13 @@ static void kexec_find_and_set_command_line(struct kimage *image)
 
 		if ((entry & IND_SOURCE)) {
 			void *va =
-				kmap_atomic_pfn(entry >> PAGE_SHIFT, KM_USER0);
+				kmap_atomic_pfn(entry >> PAGE_SHIFT);
 			r = kexec_bn2cl(va);
 			if (r) {
 				command_line = r;
 				break;
 			}
-			kunmap_atomic(va, KM_USER0);
+			kunmap_atomic(va);
 		}
 	}
 
@@ -198,7 +198,7 @@ static void kexec_find_and_set_command_line(struct kimage *image)
 
 		hverr = hv_set_command_line(
 			(HV_VirtAddr) command_line, strlen(command_line));
-		kunmap_atomic(command_line, KM_USER0);
+		kunmap_atomic(command_line);
 	} else {
 		pr_info("%s: no command line found; making empty\n",
 		       __func__);

arch/tile/lib/memcpy_tile64.c

@@ -54,7 +54,7 @@ typedef unsigned long (*memcpy_t)(void *, const void *, unsigned long);
  * we must run with interrupts disabled to avoid the risk of some
  * other code seeing the incoherent data in our cache.  (Recall that
  * our cache is indexed by PA, so even if the other code doesn't use
- * our KM_MEMCPY virtual addresses, they'll still hit in cache using
+ * our kmap_atomic virtual addresses, they'll still hit in cache using
  * the normal VAs that aren't supposed to hit in cache.)
  */
 static void memcpy_multicache(void *dest, const void *source,
@@ -64,6 +64,7 @@ static void memcpy_multicache(void *dest, const void *source,
 	unsigned long flags, newsrc, newdst;
 	pmd_t *pmdp;
 	pte_t *ptep;
+	int type0, type1;
 	int cpu = get_cpu();
 
 	/*
@@ -77,7 +78,8 @@ static void memcpy_multicache(void *dest, const void *source,
 	sim_allow_multiple_caching(1);
 
 	/* Set up the new dest mapping */
-	idx = FIX_KMAP_BEGIN + (KM_TYPE_NR * cpu) + KM_MEMCPY0;
+	type0 = kmap_atomic_idx_push();
+	idx = FIX_KMAP_BEGIN + (KM_TYPE_NR * cpu) + type0;
 	newdst = __fix_to_virt(idx) + ((unsigned long)dest & (PAGE_SIZE-1));
 	pmdp = pmd_offset(pud_offset(pgd_offset_k(newdst), newdst), newdst);
 	ptep = pte_offset_kernel(pmdp, newdst);
@@ -87,7 +89,8 @@ static void memcpy_multicache(void *dest, const void *source,
 	}
 
 	/* Set up the new source mapping */
-	idx += (KM_MEMCPY0 - KM_MEMCPY1);
+	type1 = kmap_atomic_idx_push();
+	idx += (type0 - type1);
 	src_pte = hv_pte_set_nc(src_pte);
 	src_pte = hv_pte_clear_writable(src_pte);  /* be paranoid */
 	newsrc = __fix_to_virt(idx) + ((unsigned long)source & (PAGE_SIZE-1));
@@ -119,6 +122,8 @@ static void memcpy_multicache(void *dest, const void *source,
 	 * We're done: notify the simulator that all is back to normal,
 	 * and re-enable interrupts and pre-emption.
 	 */
+	kmap_atomic_idx_pop();
+	kmap_atomic_idx_pop();
 	sim_allow_multiple_caching(0);
 	local_irq_restore(flags);
 	put_cpu();

arch/tile/mm/highmem.c

@@ -227,7 +227,7 @@ EXPORT_SYMBOL(kmap_atomic_prot);
 void *__kmap_atomic(struct page *page)
 {
 	/* PAGE_NONE is a magic value that tells us to check immutability. */
-	return kmap_atomic_prot(page, type, PAGE_NONE);
+	return kmap_atomic_prot(page, PAGE_NONE);
 }
 EXPORT_SYMBOL(__kmap_atomic);
 

arch/tile/mm/pgtable.c

@@ -134,9 +134,9 @@ void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t flags)
 }
 
 #if defined(CONFIG_HIGHPTE)
-pte_t *_pte_offset_map(pmd_t *dir, unsigned long address, enum km_type type)
+pte_t *_pte_offset_map(pmd_t *dir, unsigned long address)
 {
-	pte_t *pte = kmap_atomic(pmd_page(*dir), type) +
+	pte_t *pte = kmap_atomic(pmd_page(*dir)) +
 		(pmd_ptfn(*dir) << HV_LOG2_PAGE_TABLE_ALIGN) & ~PAGE_MASK;
 	return &pte[pte_index(address)];
 }