Move Sibyte Kconfig stuff into it's own Kconfig.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Move Sibyte Kconfig stuff into it's own Kconfig.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
38b18f72 · Ralf Baechle · db89a48c · 38b18f72 · 38b18f72
Commit 38b18f72 authored Feb 03, 2005 by Ralf Baechle
Hide whitespace changes
Inline Side-by-side

Showing with 145 additions and 216 deletions

arch/mips/Kconfig arch/mips/Kconfig +2 -216

arch/mips/sibyte/Kconfig arch/mips/sibyte/Kconfig +143 -0

No files found.
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -749,222 +749,6 @@ config MIPS_MTX1
 endchoice
-config SIBYTE_SB1xxx_SOC
-	bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	select BOOT_ELF32
-	select DMA_COHERENT
-	select SWAP_IO_SPACE
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-choice
-	prompt "BCM1xxx SOC-based board"
-	depends on SIBYTE_SB1xxx_SOC
-	default SIBYTE_SWARM
-	help
-	  Enable support for boards based on the SiByte line of SOCs
-	  from Broadcom.  There are configurations for the known
-	  evaluation boards, or you can choose "Other" and add your
-	  own board support code.
-config SIBYTE_SWARM
-	bool "BCM91250A-SWARM"
-	select SIBYTE_SB1250
-config SIBYTE_SENTOSA
-	bool "BCM91250E-Sentosa"
-	select SIBYTE_SB1250
-config SIBYTE_RHONE
-	bool "BCM91125E-Rhone"
-	select SIBYTE_BCM1125H
-config SIBYTE_CARMEL
-	bool "BCM91120x-Carmel"
-	select SIBYTE_BCM1120
-config SIBYTE_PTSWARM
-	bool "BCM91250PT-PTSWARM"
-	select SIBYTE_SB1250
-config SIBYTE_LITTLESUR
-	bool "BCM91250C2-LittleSur"
-	select SIBYTE_SB1250
-config SIBYTE_CRHINE
-	bool "BCM91120C-CRhine"
-	select SIBYTE_BCM1120
-config SIBYTE_CRHONE
-	bool "BCM91125C-CRhone"
-	select SIBYTE_BCM1125
-config SIBYTE_UNKNOWN
-	bool "Other"
-endchoice
-config SIBYTE_BOARD
-	bool
-	depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN
-	default y
-choice
-	prompt "BCM1xxx SOC Type"
-	depends on SIBYTE_UNKNOWN
-	default SIBYTE_UNK_BCM1250
-	help
-	  Since you haven't chosen a known evaluation board from
-	  Broadcom, you must explicitly pick the SOC this kernel is
-	  targetted for.
-config SIBYTE_UNK_BCM1250
-	bool "BCM1250"
-	select SIBYTE_SB1250
-config SIBYTE_UNK_BCM1120
-	bool "BCM1120"
-	select SIBYTE_BCM1120
-config SIBYTE_UNK_BCM1125
-	bool "BCM1125"
-	select SIBYTE_BCM1125
-config SIBYTE_UNK_BCM1125H
-	bool "BCM1125H"
-	select SIBYTE_BCM1125H
-endchoice
-config SIBYTE_SB1250
-	bool
-	select HW_HAS_PCI
-config SIBYTE_BCM1120
-	bool
-	select SIBYTE_BCM112X
-config SIBYTE_BCM1125
-	bool
-	select HW_HAS_PCI
-	select SIBYTE_BCM112X
-config SIBYTE_BCM1125H
-	bool
-	select HW_HAS_PCI
-	select SIBYTE_BCM112X
-config SIBYTE_BCM112X
-	bool
-choice
-	prompt "SiByte SOC Stepping"
-	depends on SIBYTE_SB1xxx_SOC
-config CPU_SB1_PASS_1
-	bool "1250 Pass1"
-	depends on SIBYTE_SB1250
-	select CPU_HAS_PREFETCH
-config CPU_SB1_PASS_2_1250
-	bool "1250 An"
-	depends on SIBYTE_SB1250
-	select CPU_SB1_PASS_2
-	help
-	  Also called BCM1250 Pass 2
-config CPU_SB1_PASS_2_2
-	bool "1250 Bn"
-	depends on SIBYTE_SB1250
-	select CPU_HAS_PREFETCH
-	help
-	  Also called BCM1250 Pass 2.2
-config CPU_SB1_PASS_4
-	bool "1250 Cn"
-	depends on SIBYTE_SB1250
-	select CPU_HAS_PREFETCH
-	help
-	  Also called BCM1250 Pass 3
-config CPU_SB1_PASS_2_112x
-	bool "112x Hybrid"
-	depends on SIBYTE_BCM112X
-	select CPU_SB1_PASS_2
-config CPU_SB1_PASS_3
-	bool "112x An"
-	depends on SIBYTE_BCM112X
-	select CPU_HAS_PREFETCH
-endchoice
-config CPU_SB1_PASS_2
-	bool
-config SIBYTE_HAS_LDT
-	bool
-	depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
-	default y
-config SIMULATION
-	bool "Running under simulation"
-	depends on SIBYTE_SB1xxx_SOC
-	help
-	  Build a kernel suitable for running under the GDB simulator.
-	  Primarily adjusts the kernel's notion of time.
-config SIBYTE_CFE
-	bool "Booting from CFE"
-	depends on SIBYTE_SB1xxx_SOC
-	help
-	  Make use of the CFE API for enumerating available memory,
-	  controlling secondary CPUs, and possibly console output.
-config SIBYTE_CFE_CONSOLE
-	bool "Use firmware console"
-	depends on SIBYTE_CFE
-	help
-	  Use the CFE API's console write routines during boot.  Other console
-	  options (VT console, sb1250 duart console, etc.) should not be
-	  configured.
-config SIBYTE_STANDALONE
-	bool
-	depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
-	default y
-config SIBYTE_STANDALONE_RAM_SIZE
-	int "Memory size (in megabytes)"
-	depends on SIBYTE_STANDALONE
-	default "32"
-config SIBYTE_BUS_WATCHER
-	bool "Support for Bus Watcher statistics"
-	depends on SIBYTE_SB1xxx_SOC
-	help
-	  Handle and keep statistics on the bus error interrupts (COR_ECC,
-	  BAD_ECC, IO_BUS).
-config SIBYTE_BW_TRACE
-	bool "Capture bus trace before bus error"
-	depends on SIBYTE_BUS_WATCHER
-	help
-	  Run a continuous bus trace, dumping the raw data as soon as
-	  a ZBbus error is detected.  Cannot work if ZBbus profiling
-	  is turned on, and also will interfere with JTAG-based trace
-	  buffer activity.  Raw buffer data is dumped to console, and
-	  must be processed off-line.
-config SIBYTE_SB1250_PROF
-	bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
-	depends on SIBYTE_SB1xxx_SOC
-config SIBYTE_TBPROF
-	bool "Support for ZBbus profiling"
-	depends on SIBYTE_SB1xxx_SOC
 config SNI_RM200_PCI
 	bool "Support for SNI RM200 PCI"
 	select ARC
@@ -1002,6 +786,8 @@ config TOSHIBA_FPCIB0
 	bool "FPCIB0 Backplane Support"
 	depends on TOSHIBA_RBTX4927
+source "arch/mips/sibyte/Kconfig"
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y

--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
+config SIBYTE_SB1250
+	bool
+	select HW_HAS_PCI
+	select SIBYTE_HAS_LDT
+	select SIBYTE_SB1xxx_SOC
+config SIBYTE_BCM1120
+	bool
+	select SIBYTE_BCM112X
+	select SIBYTE_SB1xxx_SOC
+config SIBYTE_BCM1125
+	bool
+	select HW_HAS_PCI
+	select SIBYTE_BCM112X
+	select SIBYTE_SB1xxx_SOC
+config SIBYTE_BCM1125H
+	bool
+	select HW_HAS_PCI
+	select SIBYTE_BCM112X
+	select SIBYTE_HAS_LDT
+	select SIBYTE_SB1xxx_SOC
+config SIBYTE_BCM112X
+	bool
+	select SIBYTE_SB1xxx_SOC
+config SIBYTE_SB1xxx_SOC
+	bool
+	depends on EXPERIMENTAL
+	select DMA_COHERENT
+	select SIBYTE_CFE
+	select SWAP_IO_SPACE
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+choice
+	prompt "SiByte SOC Stepping"
+	depends on SIBYTE_SB1xxx_SOC
+config CPU_SB1_PASS_1
+	bool "1250 Pass1"
+	depends on SIBYTE_SB1250
+	select CPU_HAS_PREFETCH
+config CPU_SB1_PASS_2_1250
+	bool "1250 An"
+	depends on SIBYTE_SB1250
+	select CPU_SB1_PASS_2
+	help
+	  Also called BCM1250 Pass 2
+config CPU_SB1_PASS_2_2
+	bool "1250 Bn"
+	depends on SIBYTE_SB1250
+	select CPU_HAS_PREFETCH
+	help
+	  Also called BCM1250 Pass 2.2
+config CPU_SB1_PASS_4
+	bool "1250 Cn"
+	depends on SIBYTE_SB1250
+	select CPU_HAS_PREFETCH
+	help
+	  Also called BCM1250 Pass 3
+config CPU_SB1_PASS_2_112x
+	bool "112x Hybrid"
+	depends on SIBYTE_BCM112X
+	select CPU_SB1_PASS_2
+config CPU_SB1_PASS_3
+	bool "112x An"
+	depends on SIBYTE_BCM112X
+	select CPU_HAS_PREFETCH
+endchoice
+config CPU_SB1_PASS_2
+	bool
+config SIBYTE_HAS_LDT
+	bool
+	depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
+	default y
+config SIMULATION
+	bool "Running under simulation"
+	depends on SIBYTE_SB1xxx_SOC
+	help
+	  Build a kernel suitable for running under the GDB simulator.
+	  Primarily adjusts the kernel's notion of time.
+config SIBYTE_CFE
+	bool "Booting from CFE"
+	depends on SIBYTE_SB1xxx_SOC
+	help
+	  Make use of the CFE API for enumerating available memory,
+	  controlling secondary CPUs, and possibly console output.
+config SIBYTE_CFE_CONSOLE
+	bool "Use firmware console"
+	depends on SIBYTE_CFE
+	help
+	  Use the CFE API's console write routines during boot.  Other console
+	  options (VT console, sb1250 duart console, etc.) should not be
+	  configured.
+config SIBYTE_STANDALONE
+	bool
+	depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
+	default y
+config SIBYTE_STANDALONE_RAM_SIZE
+	int "Memory size (in megabytes)"
+	depends on SIBYTE_STANDALONE
+	default "32"
+config SIBYTE_BUS_WATCHER
+	bool "Support for Bus Watcher statistics"
+	depends on SIBYTE_SB1xxx_SOC
+	help
+	  Handle and keep statistics on the bus error interrupts (COR_ECC,
+	  BAD_ECC, IO_BUS).
+config SIBYTE_BW_TRACE
+	bool "Capture bus trace before bus error"
+	depends on SIBYTE_BUS_WATCHER
+	help
+	  Run a continuous bus trace, dumping the raw data as soon as
+	  a ZBbus error is detected.  Cannot work if ZBbus profiling
+	  is turned on, and also will interfere with JTAG-based trace
+	  buffer activity.  Raw buffer data is dumped to console, and
+	  must be processed off-line.
+config SIBYTE_SB1250_PROF
+	bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
+	depends on SIBYTE_SB1xxx_SOC
+config SIBYTE_TBPROF
+	bool "Support for ZBbus profiling"
+	depends on SIBYTE_SB1xxx_SOC