media: dt-bindings: Add ST VGXY61 camera sensor binding

Add device tree binding for the ST VGXY61 camera sensor, and update
MAINTAINERS file.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2022 STMicroelectronics SA.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,st-vgxy61.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics VGxy61 HDR Global Shutter Sensor Family Device Tree Bindings
+
+maintainers:
+  - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+  - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description: |-
+  STMicroelectronics VGxy61 family has a CSI-2 output port. CSI-2 output is a
+  quad lanes 800Mbps per lane.
+  Supported formats are RAW8, RAW10, RAW12, RAW14 and RAW16.
+  Following part number are supported
+  - VG5661 and VG6661 are 1.6 Mpx (1464 x 1104) monochrome and color sensors.
+  Maximum frame rate is 75 fps.
+  - VG5761 and VG6761 are 2.3 Mpx (1944 x 1204) monochrome and color sensors.
+  Maximum frame rate is 60 fps.
+
+properties:
+  compatible:
+    const: st,st-vgxy61
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  VCORE-supply:
+    description:
+      Sensor digital core supply. Must be 1.2 volts.
+
+  VDDIO-supply:
+    description:
+      Sensor digital IO supply. Must be 1.8 volts.
+
+  VANA-supply:
+    description:
+      Sensor analog supply. Must be 2.8 volts.
+
+  reset-gpios:
+    description:
+      Reference to the GPIO connected to the reset pin, if any.
+      This is an active low signal to the vgxy61.
+
+  st,strobe-gpios-polarity:
+    description:
+      Invert polarity of illuminator's lights strobe GPIOs.
+      These GPIOs directly drive the illuminator LEDs.
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            description:
+              CSI lanes to use
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+          remote-endpoint: true
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - clocks
+  - VCORE-supply
+  - VDDIO-supply
+  - VANA-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        vgxy61: csi2tx@10 {
+            compatible = "st,st-vgxy61";
+            reg = <0x10>;
+            clocks = <&clk_ext_camera>;
+            VCORE-supply = <&v1v2>;
+            VDDIO-supply = <&v1v8>;
+            VANA-supply = <&v2v8>;
+            reset-gpios = <&mfxgpio 18 GPIO_ACTIVE_LOW>;
+            port {
+                ep0: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&mipi_csi2_out>;
+                };
+            };
+        };
+    };
+...

MAINTAINERS

@@ -19522,6 +19522,16 @@ S:	Maintained
 F:	Documentation/hwmon/stpddc60.rst
 F:	drivers/hwmon/pmbus/stpddc60.c
 
+ST VGXY61 DRIVER
+M:	Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+M:	Sylvain Petinot <sylvain.petinot@foss.st.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml
+F:	Documentation/userspace-api/media/drivers/st-vgxy61.rst
+F:	drivers/media/i2c/st-vgxy61.c
+
 ST VL53L0X ToF RANGER(I2C) IIO DRIVER
 M:	Song Qiang <songqiang1304521@gmail.com>
 L:	linux-iio@vger.kernel.org