Merge tag 'renesas-gpio-rcar-for-v3.11' of...

Merge tag 'renesas-gpio-rcar-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

From Simon Horman:
Renesas ARM based SoC GPIO R-Car updates for v3.11

DT support to GPIO R-Car driver by Laurent Pinchart.

* tag 'renesas-gpio-rcar-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (131 commits)
  gpio-rcar: Add DT support

Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt

+* Renesas R-Car GPIO Controller
+
+Required Properties:
+
+  - compatible: should be one of the following.
+    - "renesas,gpio-r8a7778": for R8A7778 (R-Mobile M1) compatible GPIO controller.
+    - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller.
+    - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller.
+    - "renesas,gpio-rcar": for generic R-Car GPIO controller.
+
+  - reg: Base address and length of each memory resource used by the GPIO
+    controller hardware module.
+
+  - interrupt-parent: phandle of the parent interrupt controller.
+  - interrupts: Interrupt specifier for the controllers interrupt.
+
+  - gpio-controller: Marks the device node as a gpio controller.
+  - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
+    cell is used to specify optional parameters as bit flags. Only the GPIO
+    active low flag (bit 0) is currently supported.
+  - gpio-ranges: Range of pins managed by the GPIO controller as a 4-cells
+    tuple using the following syntax.
+
+    <[phandle of the pin controller node]
+     0
+     [index of the first pin]
+     [number of pins]>
+
+Please refer to gpio.txt in this directory for details of the common GPIO
+bindings used by client devices.
+
+Example: R8A7779 (R-Car H1) GPIO controller nodes
+
+	gpio0: gpio@ffc40000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc40000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 141 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+	};
+	...
+	gpio6: gpio@ffc46000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc46000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 147 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 192 9>;
+	};

arch/arm/Kconfig

@@ -645,7 +645,7 @@ config ARCH_SHMOBILE
 	select MULTI_IRQ_HANDLER
 	select NEED_MACH_MEMORY_H
 	select NO_IOPORT
-	select PINCTRL if ARCH_WANT_OPTIONAL_GPIOLIB
+	select PINCTRL
 	select PM_GENERIC_DOMAINS if PM
 	select SPARSE_IRQ
 	help

arch/arm/mach-shmobile/Kconfig

@@ -37,6 +37,7 @@ config ARCH_R8A7740
 
 config ARCH_R8A7778
 	bool "R-Car M1 (R8A77780)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select CPU_V7
 	select SH_CLK_CPG
 	select ARM_GIC

arch/arm/mach-shmobile/board-ap4evb.c

@@ -1026,10 +1026,8 @@ static void __init hdmi_init_pm_clock(void)
 
 /* TouchScreen */
 #ifdef CONFIG_AP4EVB_QHD
-# define GPIO_TSC_IRQ	GPIO_FN_IRQ28_123
 # define GPIO_TSC_PORT	123
 #else /* WVGA */
-# define GPIO_TSC_IRQ	GPIO_FN_IRQ7_40
 # define GPIO_TSC_PORT	40
 #endif
 
@@ -1037,22 +1035,12 @@ static void __init hdmi_init_pm_clock(void)
 #define IRQ7	evt2irq(0x02e0) /* IRQ7A */
 static int ts_get_pendown_state(void)
 {
-	int val;
-
-	gpio_free(GPIO_TSC_IRQ);
-
-	gpio_request_one(GPIO_TSC_PORT, GPIOF_IN, NULL);
-
-	val = gpio_get_value(GPIO_TSC_PORT);
-
-	gpio_request(GPIO_TSC_IRQ, NULL);
-
-	return !val;
+	return !gpio_get_value(GPIO_TSC_PORT);
 }
 
 static int ts_init(void)
 {
-	gpio_request(GPIO_TSC_IRQ, NULL);
+	gpio_request_one(GPIO_TSC_PORT, GPIOF_IN, NULL);
 
 	return 0;
 }
@@ -1086,11 +1074,42 @@ static struct i2c_board_info i2c1_devices[] = {
 
 
 static const struct pinctrl_map ap4evb_pinctrl_map[] = {
+	/* CEU */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
+				  "ceu_clk_0", "ceu"),
+	/* FSIA (AK4643) */
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
+				  "fsia_sclk_in", "fsia"),
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
+				  "fsia_data_in", "fsia"),
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
+				  "fsia_data_out", "fsia"),
+	/* FSIB (HDMI) */
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-sh7372",
+				  "fsib_mclk_in", "fsib"),
+	/* HDMI */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-sh7372",
+				  "hdmi", "hdmi"),
+	/* KEYSC */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc", "pfc-sh7372",
+				  "keysc_in04_0", "keysc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc", "pfc-sh7372",
+				  "keysc_out5", "keysc"),
+#ifndef CONFIG_AP4EVB_QHD
+	/* LCDC */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
+				  "lcd_data18", "lcd"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
+				  "lcd_sync", "lcd"),
+#endif
 	/* MMCIF */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
 				  "mmc0_data8_0", "mmc0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
 				  "mmc0_ctrl_0", "mmc0"),
+	/* SCIFA0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-sh7372",
+				  "scifa0_data", "scifa0"),
 	/* SDHI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
 				  "sdhi0_data4", "sdhi0"),
@@ -1105,6 +1124,26 @@ static const struct pinctrl_map ap4evb_pinctrl_map[] = {
 				  "sdhi1_data4", "sdhi1"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
 				  "sdhi1_ctrl", "sdhi1"),
+	/* SMSC911X */
+	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
+				  "bsc_cs5a", "bsc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
+				  "intc_irq6_0", "intc"),
+	/* TSC2007 */
+#ifdef CONFIG_AP4EVB_QHD
+	PIN_MAP_MUX_GROUP_DEFAULT("1-0048", "pfc-sh7372",
+				  "intc_irq28_0", "intc"),
+#else /* WVGA */
+	PIN_MAP_MUX_GROUP_DEFAULT("1-0048", "pfc-sh7372",
+				  "intc_irq7_0", "intc"),
+#endif
+	/* USBHS1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a66597_hcd.1", "pfc-sh7372",
+				  "usb1_vbus", "usb1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a66597_hcd.1", "pfc-sh7372",
+				  "usb1_otg_id_0", "usb1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a66597_hcd.1", "pfc-sh7372",
+				  "usb1_otg_ctrl_0", "usb1"),
 };
 
 #define GPIO_PORT9CR	IOMEM(0xE6051009)
@@ -1137,36 +1176,16 @@ static void __init ap4evb_init(void)
 				  ARRAY_SIZE(ap4evb_pinctrl_map));
 	sh7372_pinmux_init();
 
-	/* enable SCIFA0 */
-	gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
-	gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
-
-	/* enable SMSC911X */
-	gpio_request(GPIO_FN_CS5A,	NULL);
-	gpio_request(GPIO_FN_IRQ6_39,	NULL);
-
 	/* enable Debug switch (S6) */
 	gpio_request_one(32, GPIOF_IN | GPIOF_EXPORT, NULL);
 	gpio_request_one(33, GPIOF_IN | GPIOF_EXPORT, NULL);
 	gpio_request_one(34, GPIOF_IN | GPIOF_EXPORT, NULL);
 	gpio_request_one(35, GPIOF_IN | GPIOF_EXPORT, NULL);
 
-	/* USB enable */
-	gpio_request(GPIO_FN_VBUS0_1,    NULL);
-	gpio_request(GPIO_FN_IDIN_1_18,  NULL);
-	gpio_request(GPIO_FN_PWEN_1_115, NULL);
-	gpio_request(GPIO_FN_OVCN_1_114, NULL);
-	gpio_request(GPIO_FN_EXTLP_1,    NULL);
-	gpio_request(GPIO_FN_OVCN2_1,    NULL);
-
 	/* setup USB phy */
 	__raw_writew(0x8a0a, IOMEM(0xE6058130));	/* USBCR4 */
 
-	/* enable FSI2 port A (ak4643) */
-	gpio_request(GPIO_FN_FSIAIBT,	NULL);
-	gpio_request(GPIO_FN_FSIAILR,	NULL);
-	gpio_request(GPIO_FN_FSIAISLD,	NULL);
-	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
+	/* FSI2 port A (ak4643) */
 	gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
 
 	gpio_request(9, NULL);
@@ -1177,8 +1196,7 @@ static void __init ap4evb_init(void)
 	/* card detect pin for MMC slot (CN7) */
 	gpio_request_one(41, GPIOF_IN, NULL);
 
-	/* setup FSI2 port B (HDMI) */
-	gpio_request(GPIO_FN_FSIBCK, NULL);
+	/* FSI2 port B (HDMI) */
 	__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
 
 	/* set SPU2 clock to 119.6 MHz */
@@ -1208,18 +1226,6 @@ static void __init ap4evb_init(void)
 	 * IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON.
 	 */
 
-	/* enable KEYSC */
-	gpio_request(GPIO_FN_KEYOUT0, NULL);
-	gpio_request(GPIO_FN_KEYOUT1, NULL);
-	gpio_request(GPIO_FN_KEYOUT2, NULL);
-	gpio_request(GPIO_FN_KEYOUT3, NULL);
-	gpio_request(GPIO_FN_KEYOUT4, NULL);
-	gpio_request(GPIO_FN_KEYIN0_136, NULL);
-	gpio_request(GPIO_FN_KEYIN1_135, NULL);
-	gpio_request(GPIO_FN_KEYIN2_134, NULL);
-	gpio_request(GPIO_FN_KEYIN3_133, NULL);
-	gpio_request(GPIO_FN_KEYIN4,     NULL);
-
 	/* enable TouchScreen */
 	irq_set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW);
 
@@ -1241,28 +1247,6 @@ static void __init ap4evb_init(void)
 	 * For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and
 	 * IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF.
 	 */
-
-	gpio_request(GPIO_FN_LCDD17,   NULL);
-	gpio_request(GPIO_FN_LCDD16,   NULL);
-	gpio_request(GPIO_FN_LCDD15,   NULL);
-	gpio_request(GPIO_FN_LCDD14,   NULL);
-	gpio_request(GPIO_FN_LCDD13,   NULL);
-	gpio_request(GPIO_FN_LCDD12,   NULL);
-	gpio_request(GPIO_FN_LCDD11,   NULL);
-	gpio_request(GPIO_FN_LCDD10,   NULL);
-	gpio_request(GPIO_FN_LCDD9,    NULL);
-	gpio_request(GPIO_FN_LCDD8,    NULL);
-	gpio_request(GPIO_FN_LCDD7,    NULL);
-	gpio_request(GPIO_FN_LCDD6,    NULL);
-	gpio_request(GPIO_FN_LCDD5,    NULL);
-	gpio_request(GPIO_FN_LCDD4,    NULL);
-	gpio_request(GPIO_FN_LCDD3,    NULL);
-	gpio_request(GPIO_FN_LCDD2,    NULL);
-	gpio_request(GPIO_FN_LCDD1,    NULL);
-	gpio_request(GPIO_FN_LCDD0,    NULL);
-	gpio_request(GPIO_FN_LCDDISP,  NULL);
-	gpio_request(GPIO_FN_LCDDCK,   NULL);
-
 	gpio_request_one(189, GPIOF_OUT_INIT_HIGH, NULL); /* backlight */
 	gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 
@@ -1288,8 +1272,6 @@ static void __init ap4evb_init(void)
 	 */
 
 	/* MIPI-CSI stuff */
-	gpio_request(GPIO_FN_VIO_CKO, NULL);
-
 	clk = clk_get(NULL, "vck1_clk");
 	if (!IS_ERR(clk)) {
 		clk_set_rate(clk, clk_round_rate(clk, 13000000));
@@ -1299,10 +1281,6 @@ static void __init ap4evb_init(void)
 
 	sh7372_add_standard_devices();
 
-	/* HDMI */
-	gpio_request(GPIO_FN_HDMI_HPD, NULL);
-	gpio_request(GPIO_FN_HDMI_CEC, NULL);
-
 	/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
 #define SRCR4 IOMEM(0xe61580bc)
 	srcr4 = __raw_readl(SRCR4);

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -584,7 +584,7 @@ static struct regulator_init_data vcc_sdhi0_init_data = {
 static struct fixed_voltage_config vcc_sdhi0_info = {
 	.supply_name = "SDHI0 Vcc",
 	.microvolts = 3300000,
-	.gpio = GPIO_PORT75,
+	.gpio = 75,
 	.enable_high = 1,
 	.init_data = &vcc_sdhi0_init_data,
 };
@@ -615,7 +615,7 @@ static struct regulator_init_data vccq_sdhi0_init_data = {
 };
 
 static struct gpio vccq_sdhi0_gpios[] = {
-	{GPIO_PORT17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" },
+	{17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" },
 };
 
 static struct gpio_regulator_state vccq_sdhi0_states[] = {
@@ -626,7 +626,7 @@ static struct gpio_regulator_state vccq_sdhi0_states[] = {
 static struct gpio_regulator_config vccq_sdhi0_info = {
 	.supply_name = "vqmmc",
 
-	.enable_gpio = GPIO_PORT74,
+	.enable_gpio = 74,
 	.enable_high = 1,
 	.enabled_at_boot = 0,
 
@@ -664,7 +664,7 @@ static struct regulator_init_data vcc_sdhi1_init_data = {
 static struct fixed_voltage_config vcc_sdhi1_info = {
 	.supply_name = "SDHI1 Vcc",
 	.microvolts = 3300000,
-	.gpio = GPIO_PORT16,
+	.gpio = 16,
 	.enable_high = 1,
 	.init_data = &vcc_sdhi1_init_data,
 };
@@ -693,7 +693,7 @@ static struct sh_mobile_sdhi_info sdhi0_info = {
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
 			  MMC_CAP_POWER_OFF_CARD,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
-	.cd_gpio	= GPIO_PORT167,
+	.cd_gpio	= 167,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -736,7 +736,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = {
 			  MMC_CAP_POWER_OFF_CARD,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
 	/* Port72 cannot generate IRQs, will be used in polling mode. */
-	.cd_gpio	= GPIO_PORT72,
+	.cd_gpio	= 72,
 };
 
 static struct resource sdhi1_resources[] = {
@@ -1046,6 +1046,35 @@ static struct platform_device *eva_devices[] __initdata = {
 };
 
 static const struct pinctrl_map eva_pinctrl_map[] = {
+	/* CEU0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
+				  "ceu0_data_0_7", "ceu0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
+				  "ceu0_clk_0", "ceu0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
+				  "ceu0_sync", "ceu0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
+				  "ceu0_field", "ceu0"),
+	/* FSIA */
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
+				  "fsia_sclk_in", "fsia"),
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
+				  "fsia_mclk_out", "fsia"),
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
+				  "fsia_data_in_1", "fsia"),
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
+				  "fsia_data_out_0", "fsia"),
+	/* FSIB */
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740",
+				  "fsib_mclk_in", "fsib"),
+	/* GETHER */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
+				  "gether_mii", "gether"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-eth", "pfc-r8a7740",
+				  "gether_int", "gether"),
+	/* HDMI */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740",
+				  "hdmi", "hdmi"),
 	/* LCD0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
 				  "lcd0_data24_0", "lcd0"),
@@ -1058,6 +1087,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = {
 				  "mmc0_data8_1", "mmc0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740",
 				  "mmc0_ctrl_1", "mmc0"),
+	/* SCIFA1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740",
+				  "scifa1_data", "scifa1"),
 	/* SDHI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740",
 				  "sdhi0_data4", "sdhi0"),
@@ -1065,6 +1097,12 @@ static const struct pinctrl_map eva_pinctrl_map[] = {
 				  "sdhi0_ctrl", "sdhi0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740",
 				  "sdhi0_wp", "sdhi0"),
+	/* ST1232 */
+	PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-r8a7740",
+				  "intc_irq10", "intc"),
+	/* USBHS */
+	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7740",
+				  "intc_irq7_1", "intc"),
 };
 
 static void __init eva_clock_init(void)
@@ -1119,40 +1157,14 @@ static void __init eva_init(void)
 	r8a7740_pinmux_init();
 	r8a7740_meram_workaround();
 
-	/* SCIFA1 */
-	gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
-	gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
-
 	/* LCDC0 */
-	gpio_request(GPIO_FN_LCDC0_SELECT,	NULL);
-
 	gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 	gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */
 
 	/* Touchscreen */
-	gpio_request(GPIO_FN_IRQ10,	NULL); /* TP_INT */
+	gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
 
 	/* GETHER */
-	gpio_request(GPIO_FN_ET_CRS,		NULL);
-	gpio_request(GPIO_FN_ET_MDC,		NULL);
-	gpio_request(GPIO_FN_ET_MDIO,		NULL);
-	gpio_request(GPIO_FN_ET_TX_ER,		NULL);
-	gpio_request(GPIO_FN_ET_RX_ER,		NULL);
-	gpio_request(GPIO_FN_ET_ERXD0,		NULL);
-	gpio_request(GPIO_FN_ET_ERXD1,		NULL);
-	gpio_request(GPIO_FN_ET_ERXD2,		NULL);
-	gpio_request(GPIO_FN_ET_ERXD3,		NULL);
-	gpio_request(GPIO_FN_ET_TX_CLK,		NULL);
-	gpio_request(GPIO_FN_ET_TX_EN,		NULL);
-	gpio_request(GPIO_FN_ET_ETXD0,		NULL);
-	gpio_request(GPIO_FN_ET_ETXD1,		NULL);
-	gpio_request(GPIO_FN_ET_ETXD2,		NULL);
-	gpio_request(GPIO_FN_ET_ETXD3,		NULL);
-	gpio_request(GPIO_FN_ET_PHY_INT,	NULL);
-	gpio_request(GPIO_FN_ET_COL,		NULL);
-	gpio_request(GPIO_FN_ET_RX_DV,		NULL);
-	gpio_request(GPIO_FN_ET_RX_CLK,		NULL);
-
 	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
 
 	/* USB */
@@ -1163,34 +1175,17 @@ static void __init eva_init(void)
 	} else {
 		/* USB Func */
 		/*
-		 * A1 chip has 2 IRQ7 pin and it was controled by MSEL register.
-		 * OTOH, usbhs interrupt needs its value (HI/LOW) to decide
-		 * USB connection/disconnection (usbhsf_get_vbus()).
-		 * This means we needs to select GPIO_FN_IRQ7_PORT209 first,
-		 * and select GPIO 209 here
+		 * The USBHS interrupt handlers needs to read the IRQ pin value
+		 * (HI/LOW) to diffentiate USB connection and disconnection
+		 * events (usbhsf_get_vbus()). We thus need to select both the
+		 * intc_irq7_1 pin group and GPIO 209 here.
 		 */
-		gpio_request(GPIO_FN_IRQ7_PORT209, NULL);
 		gpio_request_one(209, GPIOF_IN, NULL);
 
 		platform_device_register(&usbhsf_device);
 		usb = &usbhsf_device;
 	}
 
-	/* CEU0 */
-	gpio_request(GPIO_FN_VIO0_D7,		NULL);
-	gpio_request(GPIO_FN_VIO0_D6,		NULL);
-	gpio_request(GPIO_FN_VIO0_D5,		NULL);
-	gpio_request(GPIO_FN_VIO0_D4,		NULL);
-	gpio_request(GPIO_FN_VIO0_D3,		NULL);
-	gpio_request(GPIO_FN_VIO0_D2,		NULL);
-	gpio_request(GPIO_FN_VIO0_D1,		NULL);
-	gpio_request(GPIO_FN_VIO0_D0,		NULL);
-	gpio_request(GPIO_FN_VIO0_CLK,		NULL);
-	gpio_request(GPIO_FN_VIO0_HD,		NULL);
-	gpio_request(GPIO_FN_VIO0_VD,		NULL);
-	gpio_request(GPIO_FN_VIO0_FIELD,	NULL);
-	gpio_request(GPIO_FN_VIO_CKO,		NULL);
-
 	/* CON1/CON15 Camera */
 	gpio_request_one(173, GPIOF_OUT_INIT_LOW, NULL);  /* STANDBY */
 	gpio_request_one(172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */
@@ -1198,24 +1193,11 @@ static void __init eva_init(void)
 	gpio_request_one(158, GPIOF_OUT_INIT_LOW, NULL);  /* CAM_PON */
 
 	/* FSI-WM8978 */
-	gpio_request(GPIO_FN_FSIAIBT,		NULL);
-	gpio_request(GPIO_FN_FSIAILR,		NULL);
-	gpio_request(GPIO_FN_FSIAOMC,		NULL);
-	gpio_request(GPIO_FN_FSIAOSLD,		NULL);
-	gpio_request(GPIO_FN_FSIAISLD_PORT5,	NULL);
-
 	gpio_request(7, NULL);
 	gpio_request(8, NULL);
 	gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */
 	gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */
 
-	/* FSI-HDMI */
-	gpio_request(GPIO_FN_FSIBCK,		NULL);
-
-	/* HDMI */
-	gpio_request(GPIO_FN_HDMI_HPD,		NULL);
-	gpio_request(GPIO_FN_HDMI_CEC,		NULL);
-
 	/*
 	 * CAUTION
 	 *

arch/arm/mach-shmobile/board-bockw.c

@@ -18,6 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/pinctrl/machine.h>
 #include <linux/platform_device.h>
 #include <linux/smsc911x.h>
 #include <mach/common.h>
@@ -37,6 +38,14 @@ static struct resource smsc911x_resources[] = {
 	DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
 };
 
+static const struct pinctrl_map bockw_pinctrl_map[] = {
+	/* SCIF0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
+				  "scif0_data_a", "scif0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
+				  "scif0_ctrl", "scif0"),
+};
+
 #define IRQ0MR	0x30
 static void __init bockw_init(void)
 {
@@ -46,6 +55,10 @@ static void __init bockw_init(void)
 	r8a7778_init_irq_extpin(1);
 	r8a7778_add_standard_devices();
 
+	pinctrl_register_mappings(bockw_pinctrl_map,
+				  ARRAY_SIZE(bockw_pinctrl_map));
+	r8a7778_pinmux_init();
+
 	fpga = ioremap_nocache(0x18200000, SZ_1M);
 	if (fpga) {
 		/*

arch/arm/mach-shmobile/board-bonito.c

@@ -330,12 +330,6 @@ static struct platform_device smsc_device = {
 	.num_resources	= ARRAY_SIZE(smsc_resources),
 };
 
-/*
- * core board devices
- */
-static struct platform_device *bonito_core_devices[] __initdata = {
-};
-
 /*
  * base board devices
  */
@@ -375,12 +369,37 @@ static void __init bonito_map_io(void)
 #define VCCQ1CR		IOMEM(0xE6058140)
 #define VCCQ1LCDCR	IOMEM(0xE6058186)
 
+/*
+ * HACK: The FPGA mappings should be associated with the FPGA device, but we
+ * don't have one at the moment. Associate them with the PFC device to make
+ * sure they will be applied.
+ */
+static const struct pinctrl_map fpga_pinctrl_map[] = {
+	/* FPGA */
+	PIN_MAP_MUX_GROUP_DEFAULT("pfc-r8a7740", "pfc-r8a7740",
+				  "bsc_cs5a_0", "bsc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("pfc-r8a7740", "pfc-r8a7740",
+				  "bsc_cs5b", "bsc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("pfc-r8a7740", "pfc-r8a7740",
+				  "bsc_cs6a", "bsc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("pfc-r8a7740", "pfc-r8a7740",
+				  "intc_irq10", "intc"),
+};
+
+static const struct pinctrl_map scifa5_pinctrl_map[] = {
+	/* SCIFA5 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.5", "pfc-r8a7740",
+				  "scifa5_data_2", "scifa5"),
+};
+
 static void __init bonito_init(void)
 {
 	u16 val;
 
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 
+	pinctrl_register_mappings(fpga_pinctrl_map,
+				  ARRAY_SIZE(fpga_pinctrl_map));
 	r8a7740_pinmux_init();
 	bonito_fpga_init();
 
@@ -397,9 +416,6 @@ static void __init bonito_init(void)
 
 	r8a7740_add_standard_devices();
 
-	platform_add_devices(bonito_core_devices,
-			     ARRAY_SIZE(bonito_core_devices));
-
 	/*
 	 * base board settings
 	 */
@@ -409,14 +425,6 @@ static void __init bonito_init(void)
 		u16 bsw3;
 		u16 bsw4;
 
-		/*
-		 * FPGA
-		 */
-		gpio_request(GPIO_FN_CS5B,		NULL);
-		gpio_request(GPIO_FN_CS6A,		NULL);
-		gpio_request(GPIO_FN_CS5A_PORT105,	NULL);
-		gpio_request(GPIO_FN_IRQ10,		NULL);
-
 		val = bonito_fpga_read(BVERR);
 		pr_info("bonito version: cpu %02x, base %02x\n",
 			((val >> 8) & 0xFF),
@@ -432,8 +440,8 @@ static void __init bonito_init(void)
 		if (BIT_OFF(bsw2, 1) &&	/* S38.3 = ON */
 		    BIT_OFF(bsw3, 9) &&	/* S39.6 = ON */
 		    BIT_OFF(bsw4, 4)) {	/* S43.1 = ON */
-			gpio_request(GPIO_FN_SCIFA5_TXD_PORT91,	NULL);
-			gpio_request(GPIO_FN_SCIFA5_RXD_PORT92,	NULL);
+			pinctrl_register_mappings(scifa5_pinctrl_map,
+						  ARRAY_SIZE(scifa5_pinctrl_map));
 		}
 
 		/*
@@ -443,7 +451,6 @@ static void __init bonito_init(void)
 		    BIT_ON(bsw2, 2)) {	/* S38.2 = OFF */
 			pinctrl_register_mappings(lcdc0_pinctrl_map,
 						  ARRAY_SIZE(lcdc0_pinctrl_map));
-			gpio_request(GPIO_FN_LCDC0_SELECT, NULL);
 
 			gpio_request_one(61, GPIOF_OUT_INIT_HIGH,
 					 NULL); /* LCDDON */

arch/arm/mach-shmobile/board-kzm9g-reference.c

@@ -79,7 +79,6 @@ static void __init kzm_init(void)
 	sh73a0_pinmux_init();
 
 	/* enable SD */
-	gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON,	NULL);
 	gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
 
 	gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */

arch/arm/mach-shmobile/board-kzm9g.c

@@ -663,13 +663,13 @@ static unsigned long pin_pullup_conf[] = {
 
 static const struct pinctrl_map kzm_pinctrl_map[] = {
 	/* FSIA (AK4648) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
 				  "fsia_mclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
 				  "fsia_sclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
 				  "fsia_data_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2", "pfc-sh73a0",
 				  "fsia_data_out", "fsia"),
 	/* I2C3 */
 	PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0",
@@ -788,9 +788,6 @@ static void __init kzm_init(void)
 	/* Touchscreen */
 	gpio_request_one(223, GPIOF_IN, NULL); /* IRQ8 */
 
-	/* enable SD */
-	gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON,	NULL);
-
 #ifdef CONFIG_CACHE_L2X0
 	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
 	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);

arch/arm/mach-shmobile/board-lager.c

@@ -21,15 +21,30 @@
 #include <linux/interrupt.h>
 #include <linux/irqchip.h>
 #include <linux/kernel.h>
+#include <linux/pinctrl/machine.h>
 #include <linux/platform_device.h>
 #include <mach/common.h>
 #include <mach/r8a7790.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+static const struct pinctrl_map lager_pinctrl_map[] = {
+	/* SCIF0 (CN19: DEBUG SERIAL0) */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
+				  "scif0_data", "scif0"),
+	/* SCIF1 (CN20: DEBUG SERIAL1) */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790",
+				  "scif1_data", "scif1"),
+};
+
 static void __init lager_add_standard_devices(void)
 {
 	r8a7790_clock_init();
+
+	pinctrl_register_mappings(lager_pinctrl_map,
+				  ARRAY_SIZE(lager_pinctrl_map));
+	r8a7790_pinmux_init();
+
 	r8a7790_add_standard_devices();
 }
 

arch/arm/mach-shmobile/board-mackerel.c

@@ -1309,6 +1309,49 @@ static struct i2c_board_info i2c1_devices[] = {
 };
 
 static const struct pinctrl_map mackerel_pinctrl_map[] = {
+	/* ADXL34X */
+	PIN_MAP_MUX_GROUP_DEFAULT("1-0053", "pfc-sh7372",
+				  "intc_irq21", "intc"),
+	/* CEU */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
+				  "ceu_data_0_7", "ceu"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
+				  "ceu_clk_0", "ceu"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
+				  "ceu_sync", "ceu"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
+				  "ceu_field", "ceu"),
+	/* FLCTL */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372",
+				  "flctl_data", "flctl"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372",
+				  "flctl_ce0", "flctl"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_flctl.0", "pfc-sh7372",
+				  "flctl_ctrl", "flctl"),
+	/* FSIA (AK4643) */
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
+				  "fsia_sclk_in", "fsia"),
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
+				  "fsia_data_in", "fsia"),
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
+				  "fsia_data_out", "fsia"),
+	/* FSIB (HDMI) */
+	PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-sh7372",
+				  "fsib_mclk_in", "fsib"),
+	/* HDMI */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-sh7372",
+				  "hdmi", "hdmi"),
+	/* LCDC */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
+				  "lcd_data24", "lcd"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-sh7372",
+				  "lcd_sync", "lcd"),
+	/* SCIFA0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-sh7372",
+				  "scifa0_data", "scifa0"),
+	/* SCIFA2 (GT-720F GPS module) */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh7372",
+				  "scifa2_data", "scifa2"),
 	/* SDHI0 */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
 				  "sdhi0_data4", "sdhi0"),
@@ -1316,6 +1359,8 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = {
 				  "sdhi0_ctrl", "sdhi0"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
 				  "sdhi0_wp", "sdhi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
+				  "intc_irq26_1", "intc"),
 	/* SDHI1 */
 #if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
@@ -1334,6 +1379,25 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = {
 				  "sdhi2_data4", "sdhi2"),
 	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372",
 				  "sdhi2_ctrl", "sdhi2"),
+	/* SMSC911X */
+	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
+				  "bsc_cs5a", "bsc"),
+	PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-sh7372",
+				  "intc_irq6_0", "intc"),
+	/* ST1232 */
+	PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-sh7372",
+				  "intc_irq7_0", "intc"),
+	/* TCA6416 */
+	PIN_MAP_MUX_GROUP_DEFAULT("0-0020", "pfc-sh7372",
+				  "intc_irq9_0", "intc"),
+	/* USBHS0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.0", "pfc-sh7372",
+				  "usb0_vbus", "usb0"),
+	/* USBHS1 */
+	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
+				  "usb1_vbus", "usb1"),
+	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
+				  "usb1_otg_id_0", "usb1"),
 };
 
 #define GPIO_PORT9CR	IOMEM(0xE6051009)
@@ -1377,61 +1441,18 @@ static void __init mackerel_init(void)
 				  ARRAY_SIZE(mackerel_pinctrl_map));
 	sh7372_pinmux_init();
 
-	/* enable SCIFA0 */
-	gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
-	gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
-
-	/* enable SMSC911X */
-	gpio_request(GPIO_FN_CS5A,	NULL);
-	gpio_request(GPIO_FN_IRQ6_39,	NULL);
-
-	/* LCDC */
-	gpio_request(GPIO_FN_LCDD23,   NULL);
-	gpio_request(GPIO_FN_LCDD22,   NULL);
-	gpio_request(GPIO_FN_LCDD21,   NULL);
-	gpio_request(GPIO_FN_LCDD20,   NULL);
-	gpio_request(GPIO_FN_LCDD19,   NULL);
-	gpio_request(GPIO_FN_LCDD18,   NULL);
-	gpio_request(GPIO_FN_LCDD17,   NULL);
-	gpio_request(GPIO_FN_LCDD16,   NULL);
-	gpio_request(GPIO_FN_LCDD15,   NULL);
-	gpio_request(GPIO_FN_LCDD14,   NULL);
-	gpio_request(GPIO_FN_LCDD13,   NULL);
-	gpio_request(GPIO_FN_LCDD12,   NULL);
-	gpio_request(GPIO_FN_LCDD11,   NULL);
-	gpio_request(GPIO_FN_LCDD10,   NULL);
-	gpio_request(GPIO_FN_LCDD9,    NULL);
-	gpio_request(GPIO_FN_LCDD8,    NULL);
-	gpio_request(GPIO_FN_LCDD7,    NULL);
-	gpio_request(GPIO_FN_LCDD6,    NULL);
-	gpio_request(GPIO_FN_LCDD5,    NULL);
-	gpio_request(GPIO_FN_LCDD4,    NULL);
-	gpio_request(GPIO_FN_LCDD3,    NULL);
-	gpio_request(GPIO_FN_LCDD2,    NULL);
-	gpio_request(GPIO_FN_LCDD1,    NULL);
-	gpio_request(GPIO_FN_LCDD0,    NULL);
-	gpio_request(GPIO_FN_LCDDISP,  NULL);
-	gpio_request(GPIO_FN_LCDDCK,   NULL);
-
 	/* backlight, off by default */
 	gpio_request_one(31, GPIOF_OUT_INIT_LOW, NULL);
 
 	gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 
 	/* USBHS0 */
-	gpio_request(GPIO_FN_VBUS0_0, NULL);
 	gpio_request_pulldown(GPIO_PORT168CR); /* VBUS0_0 pull down */
 
 	/* USBHS1 */
-	gpio_request(GPIO_FN_VBUS0_1, NULL);
 	gpio_request_pulldown(GPIO_PORT167CR); /* VBUS0_1 pull down */
-	gpio_request(GPIO_FN_IDIN_1_113, NULL);
 
-	/* enable FSI2 port A (ak4643) */
-	gpio_request(GPIO_FN_FSIAIBT,	NULL);
-	gpio_request(GPIO_FN_FSIAILR,	NULL);
-	gpio_request(GPIO_FN_FSIAISLD,	NULL);
-	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
+	/* FSI2 port A (ak4643) */
 	gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
 
 	gpio_request(9,  NULL);
@@ -1441,8 +1462,7 @@ static void __init mackerel_init(void)
 
 	intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
 
-	/* setup FSI2 port B (HDMI) */
-	gpio_request(GPIO_FN_FSIBCK, NULL);
+	/* FSI2 port B (HDMI) */
 	__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
 
 	/* set SPU2 clock to 119.6 MHz */
@@ -1452,68 +1472,15 @@ static void __init mackerel_init(void)
 		clk_put(clk);
 	}
 
-	/* enable Keypad */
-	gpio_request(GPIO_FN_IRQ9_42,	NULL);
+	/* Keypad */
 	irq_set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH);
 
-	/* enable Touchscreen */
-	gpio_request(GPIO_FN_IRQ7_40,	NULL);
+	/* Touchscreen */
 	irq_set_irq_type(IRQ7, IRQ_TYPE_LEVEL_LOW);
 
-	/* enable Accelerometer */
-	gpio_request(GPIO_FN_IRQ21,	NULL);
+	/* Accelerometer */
 	irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
 
-	/* SDHI0 PORT172 card-detect IRQ26 */
-	gpio_request(GPIO_FN_IRQ26_172, NULL);
-
-	/* FLCTL */
-	gpio_request(GPIO_FN_D0_NAF0, NULL);
-	gpio_request(GPIO_FN_D1_NAF1, NULL);
-	gpio_request(GPIO_FN_D2_NAF2, NULL);
-	gpio_request(GPIO_FN_D3_NAF3, NULL);
-	gpio_request(GPIO_FN_D4_NAF4, NULL);
-	gpio_request(GPIO_FN_D5_NAF5, NULL);
-	gpio_request(GPIO_FN_D6_NAF6, NULL);
-	gpio_request(GPIO_FN_D7_NAF7, NULL);
-	gpio_request(GPIO_FN_D8_NAF8, NULL);
-	gpio_request(GPIO_FN_D9_NAF9, NULL);
-	gpio_request(GPIO_FN_D10_NAF10, NULL);
-	gpio_request(GPIO_FN_D11_NAF11, NULL);
-	gpio_request(GPIO_FN_D12_NAF12, NULL);
-	gpio_request(GPIO_FN_D13_NAF13, NULL);
-	gpio_request(GPIO_FN_D14_NAF14, NULL);
-	gpio_request(GPIO_FN_D15_NAF15, NULL);
-	gpio_request(GPIO_FN_FCE0, NULL);
-	gpio_request(GPIO_FN_WE0_FWE, NULL);
-	gpio_request(GPIO_FN_FRB, NULL);
-	gpio_request(GPIO_FN_A4_FOE, NULL);
-	gpio_request(GPIO_FN_A5_FCDE, NULL);
-	gpio_request(GPIO_FN_RD_FSC, NULL);
-
-	/* enable GPS module (GT-720F) */
-	gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
-	gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
-
-	/* CEU */
-	gpio_request(GPIO_FN_VIO_CLK, NULL);
-	gpio_request(GPIO_FN_VIO_VD, NULL);
-	gpio_request(GPIO_FN_VIO_HD, NULL);
-	gpio_request(GPIO_FN_VIO_FIELD, NULL);
-	gpio_request(GPIO_FN_VIO_CKO, NULL);
-	gpio_request(GPIO_FN_VIO_D7, NULL);
-	gpio_request(GPIO_FN_VIO_D6, NULL);
-	gpio_request(GPIO_FN_VIO_D5, NULL);
-	gpio_request(GPIO_FN_VIO_D4, NULL);
-	gpio_request(GPIO_FN_VIO_D3, NULL);
-	gpio_request(GPIO_FN_VIO_D2, NULL);
-	gpio_request(GPIO_FN_VIO_D1, NULL);
-	gpio_request(GPIO_FN_VIO_D0, NULL);
-
-	/* HDMI */
-	gpio_request(GPIO_FN_HDMI_HPD, NULL);
-	gpio_request(GPIO_FN_HDMI_CEC, NULL);
-
 	/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
 	srcr4 = __raw_readl(SRCR4);
 	__raw_writel(srcr4 | (1 << 13), SRCR4);

arch/arm/mach-shmobile/board-marzen.c

@@ -28,6 +28,7 @@
 #include <linux/leds.h>
 #include <linux/dma-mapping.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/gpio-rcar.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
@@ -173,15 +174,15 @@ static struct platform_device usb_phy_device = {
 static struct gpio_led marzen_leds[] = {
 	{
 		.name		= "led2",
-		.gpio		= 157,
+		.gpio		= RCAR_GP_PIN(4, 29),
 		.default_state	= LEDS_GPIO_DEFSTATE_ON,
 	}, {
 		.name		= "led3",
-		.gpio		= 158,
+		.gpio		= RCAR_GP_PIN(4, 30),
 		.default_state	= LEDS_GPIO_DEFSTATE_ON,
 	}, {
 		.name		= "led4",
-		.gpio		= 159,
+		.gpio		= RCAR_GP_PIN(4, 31),
 		.default_state	= LEDS_GPIO_DEFSTATE_ON,
 	},
 };

arch/arm/mach-shmobile/include/mach/irqs.h

@@ -16,4 +16,9 @@
 #define IRQPIN_BASE		2000
 #define irq_pin(nr)		((nr) + IRQPIN_BASE)
 
+/* GPIO IRQ */
+#define _GPIO_IRQ_BASE		2500
+#define GPIO_IRQ_BASE(x)	(_GPIO_IRQ_BASE + (32 * x))
+#define GPIO_IRQ(x, y)		(_GPIO_IRQ_BASE + (32 * x) + y)
+
 #endif /* __ASM_MACH_IRQS_H */

arch/arm/mach-shmobile/include/mach/r8a7778.h

@@ -28,5 +28,6 @@ extern void r8a7778_init_irq(void);
 extern void r8a7778_init_irq_dt(void);
 extern void r8a7778_clock_init(void);
 extern void r8a7778_init_irq_extpin(int irlm);
+extern void r8a7778_pinmux_init(void);
 
 #endif /* __ASM_R8A7778_H__ */

arch/arm/mach-shmobile/setup-r8a7740.c

@@ -70,29 +70,15 @@ void __init r8a7740_map_io(void)
 }
 
 /* PFC */
-static struct resource r8a7740_pfc_resources[] = {
-	[0] = {
-		.start	= 0xe6050000,
-		.end	= 0xe6057fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0xe605800c,
-		.end	= 0xe605802b,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device r8a7740_pfc_device = {
-	.name		= "pfc-r8a7740",
-	.id		= -1,
-	.resource	= r8a7740_pfc_resources,
-	.num_resources	= ARRAY_SIZE(r8a7740_pfc_resources),
+static const struct resource pfc_resources[] = {
+	DEFINE_RES_MEM(0xe6050000, 0x8000),
+	DEFINE_RES_MEM(0xe605800c, 0x0020),
 };
 
 void __init r8a7740_pinmux_init(void)
 {
-	platform_device_register(&r8a7740_pfc_device);
+	platform_device_register_simple("pfc-r8a7740", -1, pfc_resources,
+					ARRAY_SIZE(pfc_resources));
 }
 
 static struct renesas_intc_irqpin_config irqpin0_platform_data = {

arch/arm/mach-shmobile/setup-r8a7778.c

@@ -24,6 +24,7 @@
 #include <linux/irqchip/arm-gic.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/irq-renesas-intc-irqpin.h>
 #include <linux/platform_device.h>
 #include <linux/irqchip.h>
@@ -94,6 +95,52 @@ static struct resource ether_resources[] = {
 		&sh_tmu##idx##_platform_data,		\
 		sizeof(sh_tmu##idx##_platform_data))
 
+/* PFC/GPIO */
+static struct resource pfc_resources[] = {
+	DEFINE_RES_MEM(0xfffc0000, 0x118),
+};
+
+#define R8A7778_GPIO(idx)						\
+static struct resource r8a7778_gpio##idx##_resources[] = {		\
+	DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30),		\
+	DEFINE_RES_IRQ(gic_iid(0x87)),					\
+};									\
+									\
+static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data = {	\
+	.gpio_base	= 32 * (idx),					\
+	.irq_base	= GPIO_IRQ_BASE(idx),				\
+	.number_of_pins	= 32,						\
+	.pctl_name	= "pfc-r8a7778",				\
+}
+
+R8A7778_GPIO(0);
+R8A7778_GPIO(1);
+R8A7778_GPIO(2);
+R8A7778_GPIO(3);
+R8A7778_GPIO(4);
+
+#define r8a7778_register_gpio(idx)				\
+	platform_device_register_resndata(			\
+		&platform_bus, "gpio_rcar", idx,		\
+		r8a7778_gpio##idx##_resources,			\
+		ARRAY_SIZE(r8a7778_gpio##idx##_resources),	\
+		&r8a7778_gpio##idx##_platform_data,		\
+		sizeof(r8a7778_gpio##idx##_platform_data))
+
+void __init r8a7778_pinmux_init(void)
+{
+	platform_device_register_simple(
+		"pfc-r8a7778", -1,
+		pfc_resources,
+		ARRAY_SIZE(pfc_resources));
+
+	r8a7778_register_gpio(0);
+	r8a7778_register_gpio(1);
+	r8a7778_register_gpio(2);
+	r8a7778_register_gpio(3);
+	r8a7778_register_gpio(4);
+}
+
 void __init r8a7778_add_standard_devices(void)
 {
 	int i;

arch/arm/mach-shmobile/setup-r8a7779.c

@@ -65,11 +65,7 @@ void __init r8a7779_map_io(void)
 }
 
 static struct resource r8a7779_pfc_resources[] = {
-	[0] = {
-		.start	= 0xfffc0000,
-		.end	= 0xfffc023b,
-		.flags	= IORESOURCE_MEM,
-	},
+	DEFINE_RES_MEM(0xfffc0000, 0x023c),
 };
 
 static struct platform_device r8a7779_pfc_device = {
@@ -81,15 +77,8 @@ static struct platform_device r8a7779_pfc_device = {
 
 #define R8A7779_GPIO(idx, npins) \
 static struct resource r8a7779_gpio##idx##_resources[] = {		\
-	[0] = {								\
-		.start	= 0xffc40000 + 0x1000 * (idx),			\
-		.end	= 0xffc4002b + 0x1000 * (idx),			\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-	[1] = {								\
-		.start	= gic_iid(0xad + (idx)),			\
-		.flags	= IORESOURCE_IRQ,				\
-	}								\
+	DEFINE_RES_MEM(0xffc40000 + (0x1000 * (idx)), 0x002c),		\
+	DEFINE_RES_IRQ(gic_iid(0xad + (idx))),				\
 };									\
 									\
 static struct gpio_rcar_config r8a7779_gpio##idx##_platform_data = {	\

arch/arm/mach-shmobile/setup-r8a7790.c

@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/serial_sci.h>
+#include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/irq-renesas-irqc.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
@@ -31,13 +32,46 @@
 
 static const struct resource pfc_resources[] = {
 	DEFINE_RES_MEM(0xe6060000, 0x250),
-	DEFINE_RES_MEM(0xe6050000, 0x5050),
 };
 
+#define R8A7790_GPIO(idx)						\
+static struct resource r8a7790_gpio##idx##_resources[] = {		\
+	DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50),		\
+	DEFINE_RES_IRQ(gic_spi(4 + (idx))),				\
+};									\
+									\
+static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data = {	\
+	.gpio_base	= 32 * (idx),					\
+	.irq_base	= 0,						\
+	.number_of_pins	= 32,						\
+	.pctl_name	= "pfc-r8a7790",				\
+	.has_both_edge_trigger = 1,					\
+};									\
+
+R8A7790_GPIO(0);
+R8A7790_GPIO(1);
+R8A7790_GPIO(2);
+R8A7790_GPIO(3);
+R8A7790_GPIO(4);
+R8A7790_GPIO(5);
+
+#define r8a7790_register_gpio(idx)					\
+	platform_device_register_resndata(&platform_bus, "gpio_rcar", idx, \
+		r8a7790_gpio##idx##_resources,				\
+		ARRAY_SIZE(r8a7790_gpio##idx##_resources),		\
+		&r8a7790_gpio##idx##_platform_data,			\
+		sizeof(r8a7790_gpio##idx##_platform_data))
+
 void __init r8a7790_pinmux_init(void)
 {
 	platform_device_register_simple("pfc-r8a7790", -1, pfc_resources,
 					ARRAY_SIZE(pfc_resources));
+	r8a7790_register_gpio(0);
+	r8a7790_register_gpio(1);
+	r8a7790_register_gpio(2);
+	r8a7790_register_gpio(3);
+	r8a7790_register_gpio(4);
+	r8a7790_register_gpio(5);
 }
 
 #define SCIF_COMMON(scif_type, baseaddr, irq)			\

drivers/gpio/gpio-rcar.c

@@ -49,6 +49,9 @@ struct gpio_rcar_priv {
 #define POSNEG 0x20
 #define EDGLEVEL 0x24
 #define FILONOFF 0x28
+#define BOTHEDGE 0x4c
+
+#define RCAR_MAX_GPIO_PER_BANK		32
 
 static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs)
 {
@@ -91,7 +94,8 @@ static void gpio_rcar_irq_enable(struct irq_data *d)
 static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p,
 						  unsigned int hwirq,
 						  bool active_high_rising_edge,
-						  bool level_trigger)
+						  bool level_trigger,
+						  bool both)
 {
 	unsigned long flags;
 
@@ -108,6 +112,10 @@ static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p,
 	/* Configure edge or level trigger in EDGLEVEL */
 	gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger);
 
+	/* Select one edge or both edges in BOTHEDGE */
+	if (p->config.has_both_edge_trigger)
+		gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both);
+
 	/* Select "Interrupt Input Mode" in IOINTSEL */
 	gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true);
 
@@ -127,16 +135,26 @@ static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type)
 
 	switch (type & IRQ_TYPE_SENSE_MASK) {
 	case IRQ_TYPE_LEVEL_HIGH:
-		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true);
+		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true,
+						      false);
 		break;
 	case IRQ_TYPE_LEVEL_LOW:
-		gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true);
+		gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true,
+						      false);
 		break;
 	case IRQ_TYPE_EDGE_RISING:
-		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false);
+		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
+						      false);
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
-		gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false);
+		gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false,
+						      false);
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		if (!p->config.has_both_edge_trigger)
+			return -EINVAL;
+		gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
+						      true);
 		break;
 	default:
 		return -EINVAL;
@@ -258,9 +276,39 @@ static struct irq_domain_ops gpio_rcar_irq_domain_ops = {
 	.map	= gpio_rcar_irq_domain_map,
 };
 
+static void gpio_rcar_parse_pdata(struct gpio_rcar_priv *p)
+{
+	struct gpio_rcar_config *pdata = p->pdev->dev.platform_data;
+#ifdef CONFIG_OF
+	struct device_node *np = p->pdev->dev.of_node;
+	struct of_phandle_args args;
+	int ret;
+#endif
+
+	if (pdata)
+		p->config = *pdata;
+#ifdef CONFIG_OF
+	else if (np) {
+		ret = of_parse_phandle_with_args(np, "gpio-ranges",
+				"#gpio-range-cells", 0, &args);
+		p->config.number_of_pins = ret == 0 && args.args_count == 3
+					 ? args.args[2]
+					 : RCAR_MAX_GPIO_PER_BANK;
+		p->config.gpio_base = -1;
+	}
+#endif
+
+	if (p->config.number_of_pins == 0 ||
+	    p->config.number_of_pins > RCAR_MAX_GPIO_PER_BANK) {
+		dev_warn(&p->pdev->dev,
+			 "Invalid number of gpio lines %u, using %u\n",
+			 p->config.number_of_pins, RCAR_MAX_GPIO_PER_BANK);
+		p->config.number_of_pins = RCAR_MAX_GPIO_PER_BANK;
+	}
+}
+
 static int gpio_rcar_probe(struct platform_device *pdev)
 {
-	struct gpio_rcar_config *pdata = pdev->dev.platform_data;
 	struct gpio_rcar_priv *p;
 	struct resource *io, *irq;
 	struct gpio_chip *gpio_chip;
@@ -275,14 +323,14 @@ static int gpio_rcar_probe(struct platform_device *pdev)
 		goto err0;
 	}
 
-	/* deal with driver instance configuration */
-	if (pdata)
-		p->config = *pdata;
-
 	p->pdev = pdev;
-	platform_set_drvdata(pdev, p);
 	spin_lock_init(&p->lock);
 
+	/* Get device configuration from DT node or platform data. */
+	gpio_rcar_parse_pdata(p);
+
+	platform_set_drvdata(pdev, p);
+
 	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 
@@ -309,6 +357,7 @@ static int gpio_rcar_probe(struct platform_device *pdev)
 	gpio_chip->set = gpio_rcar_set;
 	gpio_chip->to_irq = gpio_rcar_to_irq;
 	gpio_chip->label = name;
+	gpio_chip->dev = &pdev->dev;
 	gpio_chip->owner = THIS_MODULE;
 	gpio_chip->base = p->config.gpio_base;
 	gpio_chip->ngpio = p->config.number_of_pins;
@@ -333,7 +382,7 @@ static int gpio_rcar_probe(struct platform_device *pdev)
 	}
 
 	if (devm_request_irq(&pdev->dev, irq->start,
-			     gpio_rcar_irq_handler, 0, name, p)) {
+			     gpio_rcar_irq_handler, IRQF_SHARED, name, p)) {
 		dev_err(&pdev->dev, "failed to request IRQ\n");
 		ret = -ENOENT;
 		goto err1;
@@ -355,10 +404,12 @@ static int gpio_rcar_probe(struct platform_device *pdev)
 				 p->config.irq_base, ret);
 	}
 
-	ret = gpiochip_add_pin_range(gpio_chip, p->config.pctl_name, 0,
-				     gpio_chip->base, gpio_chip->ngpio);
-	if (ret < 0)
-		dev_warn(&pdev->dev, "failed to add pin range\n");
+	if (p->config.pctl_name) {
+		ret = gpiochip_add_pin_range(gpio_chip, p->config.pctl_name, 0,
+					     gpio_chip->base, gpio_chip->ngpio);
+		if (ret < 0)
+			dev_warn(&pdev->dev, "failed to add pin range\n");
+	}
 
 	return 0;
 
@@ -381,11 +432,22 @@ static int gpio_rcar_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id gpio_rcar_of_table[] = {
+	{
+		.compatible = "renesas,gpio-rcar",
+	},
+};
+
+MODULE_DEVICE_TABLE(of, gpio_rcar_of_table);
+#endif
+
 static struct platform_driver gpio_rcar_device_driver = {
 	.probe		= gpio_rcar_probe,
 	.remove		= gpio_rcar_remove,
 	.driver		= {
 		.name	= "gpio_rcar",
+		.of_match_table = of_match_ptr(gpio_rcar_of_table),
 	}
 };
 

drivers/pinctrl/sh-pfc/Kconfig

@@ -5,8 +5,6 @@
 if ARCH_SHMOBILE || SUPERH
 
 config PINCTRL_SH_PFC
-	# XXX move off the gpio dependency
-	depends on GPIOLIB
 	select GPIO_SH_PFC if ARCH_REQUIRE_GPIOLIB
 	select PINMUX
 	select PINCONF
@@ -32,11 +30,21 @@ config PINCTRL_PFC_R8A7740
 	depends on ARCH_R8A7740
 	select PINCTRL_SH_PFC
 
+config PINCTRL_PFC_R8A7778
+	def_bool y
+	depends on ARCH_R8A7778
+	select PINCTRL_SH_PFC
+
 config PINCTRL_PFC_R8A7779
 	def_bool y
 	depends on ARCH_R8A7779
 	select PINCTRL_SH_PFC
 
+config PINCTRL_PFC_R8A7790
+	def_bool y
+	depends on ARCH_R8A7790
+	select PINCTRL_SH_PFC
+
 config PINCTRL_PFC_SH7203
 	def_bool y
 	depends on CPU_SUBTYPE_SH7203
@@ -64,6 +72,7 @@ config PINCTRL_PFC_SH73A0
 	def_bool y
 	depends on ARCH_SH73A0
 	select PINCTRL_SH_PFC
+	select REGULATOR
 
 config PINCTRL_PFC_SH7720
 	def_bool y

drivers/pinctrl/sh-pfc/Makefile

@@ -5,7 +5,9 @@ endif
 obj-$(CONFIG_PINCTRL_SH_PFC)	+= sh-pfc.o
 obj-$(CONFIG_PINCTRL_PFC_R8A73A4)	+= pfc-r8a73a4.o
 obj-$(CONFIG_PINCTRL_PFC_R8A7740)	+= pfc-r8a7740.o
+obj-$(CONFIG_PINCTRL_PFC_R8A7778)	+= pfc-r8a7778.o
 obj-$(CONFIG_PINCTRL_PFC_R8A7779)	+= pfc-r8a7779.o
+obj-$(CONFIG_PINCTRL_PFC_R8A7790)	+= pfc-r8a7790.o
 obj-$(CONFIG_PINCTRL_PFC_SH7203)	+= pfc-sh7203.o
 obj-$(CONFIG_PINCTRL_PFC_SH7264)	+= pfc-sh7264.o
 obj-$(CONFIG_PINCTRL_PFC_SH7269)	+= pfc-sh7269.o

drivers/pinctrl/sh-pfc/core.c

@@ -372,6 +372,12 @@ static int sh_pfc_probe(struct platform_device *pdev)
 
 	spin_lock_init(&pfc->lock);
 
+	if (info->ops && info->ops->init) {
+		ret = info->ops->init(pfc);
+		if (ret < 0)
+			return ret;
+	}
+
 	pinctrl_provide_dummies();
 
 	/*
@@ -379,7 +385,7 @@ static int sh_pfc_probe(struct platform_device *pdev)
 	 */
 	ret = sh_pfc_register_pinctrl(pfc);
 	if (unlikely(ret != 0))
-		return ret;
+		goto error;
 
 #ifdef CONFIG_GPIO_SH_PFC
 	/*
@@ -401,6 +407,11 @@ static int sh_pfc_probe(struct platform_device *pdev)
 	dev_info(pfc->dev, "%s support registered\n", info->name);
 
 	return 0;
+
+error:
+	if (info->ops && info->ops->exit)
+		info->ops->exit(pfc);
+	return ret;
 }
 
 static int sh_pfc_remove(struct platform_device *pdev)
@@ -412,6 +423,9 @@ static int sh_pfc_remove(struct platform_device *pdev)
 #endif
 	sh_pfc_unregister_pinctrl(pfc);
 
+	if (pfc->info->ops && pfc->info->ops->exit)
+		pfc->info->ops->exit(pfc);
+
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
@@ -424,9 +438,15 @@ static const struct platform_device_id sh_pfc_id_table[] = {
 #ifdef CONFIG_PINCTRL_PFC_R8A7740
 	{ "pfc-r8a7740", (kernel_ulong_t)&r8a7740_pinmux_info },
 #endif
+#ifdef CONFIG_PINCTRL_PFC_R8A7778
+	{ "pfc-r8a7778", (kernel_ulong_t)&r8a7778_pinmux_info },
+#endif
 #ifdef CONFIG_PINCTRL_PFC_R8A7779
 	{ "pfc-r8a7779", (kernel_ulong_t)&r8a7779_pinmux_info },
 #endif
+#ifdef CONFIG_PINCTRL_PFC_R8A7790
+	{ "pfc-r8a7790", (kernel_ulong_t)&r8a7790_pinmux_info },
+#endif
 #ifdef CONFIG_PINCTRL_PFC_SH7203
 	{ "pfc-sh7203", (kernel_ulong_t)&sh7203_pinmux_info },
 #endif

drivers/pinctrl/sh-pfc/core.h

@@ -11,6 +11,7 @@
 #define __SH_PFC_CORE_H__
 
 #include <linux/compiler.h>
+#include <linux/spinlock.h>
 #include <linux/types.h>
 
 #include "sh_pfc.h"
@@ -27,6 +28,7 @@ struct sh_pfc_pinctrl;
 struct sh_pfc {
 	struct device *dev;
 	const struct sh_pfc_soc_info *info;
+	void *soc_data;
 	spinlock_t lock;
 
 	unsigned int num_windows;
@@ -56,7 +58,9 @@ int sh_pfc_config_mux(struct sh_pfc *pfc, unsigned mark, int pinmux_type);
 
 extern const struct sh_pfc_soc_info r8a73a4_pinmux_info;
 extern const struct sh_pfc_soc_info r8a7740_pinmux_info;
+extern const struct sh_pfc_soc_info r8a7778_pinmux_info;
 extern const struct sh_pfc_soc_info r8a7779_pinmux_info;
+extern const struct sh_pfc_soc_info r8a7790_pinmux_info;
 extern const struct sh_pfc_soc_info sh7203_pinmux_info;
 extern const struct sh_pfc_soc_info sh7264_pinmux_info;
 extern const struct sh_pfc_soc_info sh7269_pinmux_info;

drivers/pinctrl/sh-pfc/sh_pfc.h

@@ -11,8 +11,8 @@
 #ifndef __SH_PFC_H
 #define __SH_PFC_H
 
+#include <linux/bug.h>
 #include <linux/stringify.h>
-#include <asm-generic/gpio.h>
 
 typedef unsigned short pinmux_enum_t;
 
@@ -129,6 +129,8 @@ struct pinmux_range {
 struct sh_pfc;
 
 struct sh_pfc_soc_operations {
+	int (*init)(struct sh_pfc *pfc);
+	void (*exit)(struct sh_pfc *pfc);
 	unsigned int (*get_bias)(struct sh_pfc *pfc, unsigned int pin);
 	void (*set_bias)(struct sh_pfc *pfc, unsigned int pin,
 			 unsigned int bias);

include/linux/platform_data/gpio-rcar.h

@@ -17,10 +17,13 @@
 #define __GPIO_RCAR_H__
 
 struct gpio_rcar_config {
-	unsigned int gpio_base;
+	int gpio_base;
 	unsigned int irq_base;
 	unsigned int number_of_pins;
 	const char *pctl_name;
+	unsigned has_both_edge_trigger:1;
 };
 
+#define RCAR_GP_PIN(bank, pin)		(((bank) * 32) + (pin))
+
 #endif /* __GPIO_RCAR_H__ */