Commit 39159bea authored by Maxime Ripard's avatar Maxime Ripard Committed by Vinod Koul

dmaengine: bcm2835: Split device_control

Split the device_control callback of the Broadcom BCM2835 DMA driver to make
use of the newly introduced callbacks, that will eventually be used to retrieve
slave capabilities.
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: default avatarStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: default avatarVinod Koul <vinod.koul@intel.com>
parent 3d138877
......@@ -436,9 +436,11 @@ static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic(
return vchan_tx_prep(&c->vc, &d->vd, flags);
}
static int bcm2835_dma_slave_config(struct bcm2835_chan *c,
struct dma_slave_config *cfg)
static int bcm2835_dma_slave_config(struct dma_chan *chan,
struct dma_slave_config *cfg)
{
struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
if ((cfg->direction == DMA_DEV_TO_MEM &&
cfg->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) ||
(cfg->direction == DMA_MEM_TO_DEV &&
......@@ -452,8 +454,9 @@ static int bcm2835_dma_slave_config(struct bcm2835_chan *c,
return 0;
}
static int bcm2835_dma_terminate_all(struct bcm2835_chan *c)
static int bcm2835_dma_terminate_all(struct dma_chan *chan)
{
struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
struct bcm2835_dmadev *d = to_bcm2835_dma_dev(c->vc.chan.device);
unsigned long flags;
int timeout = 10000;
......@@ -495,24 +498,6 @@ static int bcm2835_dma_terminate_all(struct bcm2835_chan *c)
return 0;
}
static int bcm2835_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
unsigned long arg)
{
struct bcm2835_chan *c = to_bcm2835_dma_chan(chan);
switch (cmd) {
case DMA_SLAVE_CONFIG:
return bcm2835_dma_slave_config(c,
(struct dma_slave_config *)arg);
case DMA_TERMINATE_ALL:
return bcm2835_dma_terminate_all(c);
default:
return -ENXIO;
}
}
static int bcm2835_dma_chan_init(struct bcm2835_dmadev *d, int chan_id, int irq)
{
struct bcm2835_chan *c;
......@@ -615,9 +600,9 @@ static int bcm2835_dma_probe(struct platform_device *pdev)
od->ddev.device_free_chan_resources = bcm2835_dma_free_chan_resources;
od->ddev.device_tx_status = bcm2835_dma_tx_status;
od->ddev.device_issue_pending = bcm2835_dma_issue_pending;
od->ddev.device_slave_caps = bcm2835_dma_device_slave_caps;
od->ddev.device_prep_dma_cyclic = bcm2835_dma_prep_dma_cyclic;
od->ddev.device_control = bcm2835_dma_control;
od->ddev.device_config = bcm2835_dma_slave_config;
od->ddev.device_terminate_all = bcm2835_dma_terminate_all;
od->ddev.dev = &pdev->dev;
INIT_LIST_HEAD(&od->ddev.channels);
spin_lock_init(&od->lock);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment