Commit 392703b6 authored by Lad Prabhakar's avatar Lad Prabhakar Committed by Rob Herring

dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update interrupts

All the RZ/G2L and alike SoC's (listed below) have ECCRAM0/1 interrupts
supported by the IRQC block, reflect the same in DT binding doc.

- R9A07G043U              - RZ/G2UL
- R9A07G044L/R9A07G044LC  - RZ/{G2L,G2LC}
- R9A07G054               - RZ/V2L
- R9A08G045               - RZ/G3S

For the RZ/G3S SoC ("R9A08G045") ECCRAM0/1 interrupts combined into single
interrupt so we just use the below to represent them:
- ec7tie1-0
- ec7tie2-0
- ec7tiovf-0

Previously, it was assumed that BUS-error and ECCRAM0/1 error interrupts
were only supported by RZ/G2UL ("R9A07G043U") and RZ/G3S ("R9A08G045")
SoCs. However, in reality, all RZ/G2L and similar SoCs (listed above)
support these interrupts. Therefore, mark the 'interrupt-names' property
as required for all the SoCs and update the example node in the binding
document.

Fixes: 96fed779 ("dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller")
Fixes: 1cf0697a ("dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S")
Signed-off-by: default avatarLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: default avatarConor Dooley <conor.dooley@microchip.com>
Reviewed-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213085912.56600-1-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: default avatarRob Herring <robh@kernel.org>
parent 2ff94f7c
...@@ -44,7 +44,7 @@ properties: ...@@ -44,7 +44,7 @@ properties:
maxItems: 1 maxItems: 1
interrupts: interrupts:
minItems: 41 minItems: 45
items: items:
- description: NMI interrupt - description: NMI interrupt
- description: IRQ0 interrupt - description: IRQ0 interrupt
...@@ -88,9 +88,15 @@ properties: ...@@ -88,9 +88,15 @@ properties:
- description: GPIO interrupt, TINT30 - description: GPIO interrupt, TINT30
- description: GPIO interrupt, TINT31 - description: GPIO interrupt, TINT31
- description: Bus error interrupt - description: Bus error interrupt
- description: ECCRAM0 or combined ECCRAM0/1 1bit error interrupt
- description: ECCRAM0 or combined ECCRAM0/1 2bit error interrupt
- description: ECCRAM0 or combined ECCRAM0/1 error overflow interrupt
- description: ECCRAM1 1bit error interrupt
- description: ECCRAM1 2bit error interrupt
- description: ECCRAM1 error overflow interrupt
interrupt-names: interrupt-names:
minItems: 41 minItems: 45
items: items:
- const: nmi - const: nmi
- const: irq0 - const: irq0
...@@ -134,6 +140,12 @@ properties: ...@@ -134,6 +140,12 @@ properties:
- const: tint30 - const: tint30
- const: tint31 - const: tint31
- const: bus-err - const: bus-err
- const: ec7tie1-0
- const: ec7tie2-0
- const: ec7tiovf-0
- const: ec7tie1-1
- const: ec7tie2-1
- const: ec7tiovf-1
clocks: clocks:
maxItems: 2 maxItems: 2
...@@ -156,6 +168,7 @@ required: ...@@ -156,6 +168,7 @@ required:
- interrupt-controller - interrupt-controller
- reg - reg
- interrupts - interrupts
- interrupt-names
- clocks - clocks
- clock-names - clock-names
- power-domains - power-domains
...@@ -169,16 +182,19 @@ allOf: ...@@ -169,16 +182,19 @@ allOf:
compatible: compatible:
contains: contains:
enum: enum:
- renesas,r9a07g043u-irqc
- renesas,r9a08g045-irqc - renesas,r9a08g045-irqc
then: then:
properties: properties:
interrupts: interrupts:
minItems: 42 maxItems: 45
interrupt-names: interrupt-names:
minItems: 42 maxItems: 45
required: else:
- interrupt-names properties:
interrupts:
minItems: 48
interrupt-names:
minItems: 48
unevaluatedProperties: false unevaluatedProperties: false
...@@ -233,7 +249,14 @@ examples: ...@@ -233,7 +249,14 @@ examples:
<GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 25 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "nmi", interrupt-names = "nmi",
"irq0", "irq1", "irq2", "irq3", "irq0", "irq1", "irq2", "irq3",
"irq4", "irq5", "irq6", "irq7", "irq4", "irq5", "irq6", "irq7",
...@@ -244,7 +267,10 @@ examples: ...@@ -244,7 +267,10 @@ examples:
"tint16", "tint17", "tint18", "tint19", "tint16", "tint17", "tint18", "tint19",
"tint20", "tint21", "tint22", "tint23", "tint20", "tint21", "tint22", "tint23",
"tint24", "tint25", "tint26", "tint27", "tint24", "tint25", "tint26", "tint27",
"tint28", "tint29", "tint30", "tint31"; "tint28", "tint29", "tint30", "tint31",
"bus-err", "ec7tie1-0", "ec7tie2-0",
"ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
"ec7tiovf-1";
clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>, clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
<&cpg CPG_MOD R9A07G044_IA55_PCLK>; <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
clock-names = "clk", "pclk"; clock-names = "clk", "pclk";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment