drm/amd/display: add additional info for cursor position programming

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/dc_hw_types.h

@@ -404,9 +404,10 @@ struct dc_cursor_position {
 struct dc_cursor_mi_param {
 	unsigned int pixel_clk_khz;
 	unsigned int ref_clk_khz;
-	unsigned int viewport_x_start;
-	unsigned int viewport_width;
+	struct rect viewport;
 	struct fixed31_32 h_scale_ratio;
+	struct fixed31_32 v_scale_ratio;
+	enum dc_rotation_angle rotation;
 };
 
 /* IPP related types */

drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c

@@ -2801,9 +2801,10 @@ void dce110_set_cursor_position(struct pipe_ctx *pipe_ctx)
 	struct dc_cursor_mi_param param = {
 		.pixel_clk_khz = pipe_ctx->stream->timing.pix_clk_khz,
 		.ref_clk_khz = pipe_ctx->stream->ctx->dc->res_pool->ref_clock_inKhz,
-		.viewport_x_start = pipe_ctx->plane_res.scl_data.viewport.x,
-		.viewport_width = pipe_ctx->plane_res.scl_data.viewport.width,
-		.h_scale_ratio = pipe_ctx->plane_res.scl_data.ratios.horz
+		.viewport = pipe_ctx->plane_res.scl_data.viewport,
+		.h_scale_ratio = pipe_ctx->plane_res.scl_data.ratios.horz,
+		.v_scale_ratio = pipe_ctx->plane_res.scl_data.ratios.vert,
+		.rotation = pipe_ctx->plane_state->rotation
 	};
 
 	if (pipe_ctx->plane_state->address.type

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_dpp.c

@@ -445,10 +445,10 @@ void dpp1_set_cursor_position(
 		uint32_t width)
 {
 	struct dcn10_dpp *dpp = TO_DCN10_DPP(dpp_base);
-	int src_x_offset = pos->x - pos->x_hotspot - param->viewport_x_start;
+	int src_x_offset = pos->x - pos->x_hotspot - param->viewport.x;
 	uint32_t cur_en = pos->enable ? 1 : 0;
 
-	if (src_x_offset >= (int)param->viewport_width)
+	if (src_x_offset >= (int)param->viewport.width)
 		cur_en = 0;  /* not visible beyond right edge*/
 
 	if (src_x_offset + (int)width <= 0)

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hubp.c

@@ -1083,7 +1083,7 @@ void hubp1_cursor_set_position(
 		const struct dc_cursor_mi_param *param)
 {
 	struct dcn10_hubp *hubp1 = TO_DCN10_HUBP(hubp);
-	int src_x_offset = pos->x - pos->x_hotspot - param->viewport_x_start;
+	int src_x_offset = pos->x - pos->x_hotspot - param->viewport.x;
 	uint32_t cur_en = pos->enable ? 1 : 0;
 	uint32_t dst_x_offset = (src_x_offset >= 0) ? src_x_offset : 0;
 
@@ -1107,7 +1107,7 @@ void hubp1_cursor_set_position(
 				dc_fixpt_from_int(dst_x_offset),
 				param->h_scale_ratio));
 
-	if (src_x_offset >= (int)param->viewport_width)
+	if (src_x_offset >= (int)param->viewport.width)
 		cur_en = 0;  /* not visible beyond right edge*/
 
 	if (src_x_offset + (int)hubp->curs_attr.width <= 0)

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c

@@ -2520,9 +2520,10 @@ static void dcn10_set_cursor_position(struct pipe_ctx *pipe_ctx)
 	struct dc_cursor_mi_param param = {
 		.pixel_clk_khz = pipe_ctx->stream->timing.pix_clk_khz,
 		.ref_clk_khz = pipe_ctx->stream->ctx->dc->res_pool->ref_clock_inKhz,
-		.viewport_x_start = pipe_ctx->plane_res.scl_data.viewport.x,
-		.viewport_width = pipe_ctx->plane_res.scl_data.viewport.width,
-		.h_scale_ratio = pipe_ctx->plane_res.scl_data.ratios.horz
+		.viewport = pipe_ctx->plane_res.scl_data.viewport,
+		.h_scale_ratio = pipe_ctx->plane_res.scl_data.ratios.horz,
+		.v_scale_ratio = pipe_ctx->plane_res.scl_data.ratios.vert,
+		.rotation = pipe_ctx->plane_state->rotation
 	};
 
 	if (pipe_ctx->plane_state->address.type