Commit 39e9b8d2 authored by Mark Brown's avatar Mark Brown

ASoC: Add SPI support for WM8741

Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: default avatarLiam Girdwood <lrg@ti.com>
parent 398575db
......@@ -17,6 +17,7 @@
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
......@@ -547,6 +548,43 @@ static struct i2c_driver wm8741_i2c_driver = {
};
#endif
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8741_spi_probe(struct spi_device *spi)
{
struct wm8741_priv *wm8741;
int ret;
wm8741 = kzalloc(sizeof(struct wm8741_priv), GFP_KERNEL);
if (wm8741 == NULL)
return -ENOMEM;
wm8741->control_type = SND_SOC_SPI;
spi_set_drvdata(spi, wm8741);
ret = snd_soc_register_codec(&spi->dev,
&soc_codec_dev_wm8741, &wm8741_dai, 1);
if (ret < 0)
kfree(wm8741);
return ret;
}
static int __devexit wm8741_spi_remove(struct spi_device *spi)
{
snd_soc_unregister_codec(&spi->dev);
kfree(spi_get_drvdata(spi));
return 0;
}
static struct spi_driver wm8741_spi_driver = {
.driver = {
.name = "wm8741",
.owner = THIS_MODULE,
},
.probe = wm8741_spi_probe,
.remove = __devexit_p(wm8741_spi_remove),
};
#endif /* CONFIG_SPI_MASTER */
static int __init wm8741_modinit(void)
{
int ret = 0;
......@@ -556,6 +594,13 @@ static int __init wm8741_modinit(void)
if (ret != 0)
pr_err("Failed to register WM8741 I2C driver: %d\n", ret);
#endif
#if defined(CONFIG_SPI_MASTER)
ret = spi_register_driver(&wm8741_spi_driver);
if (ret != 0) {
printk(KERN_ERR "Failed to register wm8741 SPI driver: %d\n",
ret);
}
#endif
return ret;
}
......@@ -563,6 +608,9 @@ module_init(wm8741_modinit);
static void __exit wm8741_exit(void)
{
#if defined(CONFIG_SPI_MASTER)
spi_unregister_driver(&wm8741_spi_driver);
#endif
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
i2c_del_driver(&wm8741_i2c_driver);
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment