Skip to content

L
linux
Commit 39fb9930 authored by Jacopo Mondi's avatar Jacopo Mondi Committed by Mauro Carvalho Chehab
Browse files
Options

media: arch: sh: ap325rxa: Use new renesas-ceu camera driver 

Use the new renesas-ceu camera driver in ap325rxa board file instead of
the soc_camera based sh_mobile_ceu_camera driver.

Get rid of soc_camera specific components, and register CEU0 with a single
video sensor (ov7725).

Memory for the CEU video buffers is now reserved with membocks APIs
and need to be declared as dma_coherent during machine initialization to
remove that architecture specific part from CEU driver.

The ap325rxa board file registers another camera (ncm03j) for which I found no
driver in mainline kernel version, and that was configured/probed by sending
i2c messages (of 'magic blobs) from the board file itself. I removed the
sensor registration from this new version as it used soc_camera components
that will be later removed.

While at there update license to SPDX header and sort headers alphabetically.

Compile tested only.
Signed-off-by: default avatarJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
parent 1a3c230b
Hide whitespace changes
Inline Side-by-side
Showing with 80 additions and 204 deletions
arch/sh/boards/mach-ap325rxa/setup.c
View file @ 39fb9930
// SPDX-License-Identifier: GPL-2.0
/*
* Renesas - AP-325RXA
* (Compatible with Algo System ., LTD. - AP-320A)
*
* Copyright (C) 2008 Renesas Solutions Corp.
* Author : Yusuke Goda <goda.yuske@renesas.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <asm/clock.h>
#include <asm/io.h>
#include <asm/suspend.h>
#include <cpu/sh7723.h>
#include <linux/clkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/memblock.h>
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/sh_flctl.h>
#include <linux/mfd/tmio.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/sh_intc.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
#include <linux/videodev2.h>
#include <linux/sh_intc.h>
#include <media/drv-intf/renesas-ceu.h>
#include <media/i2c/ov772x.h>
#include <media/soc_camera.h>
#include <linux/platform_data/media/soc_camera_platform.h>
#include <media/drv-intf/sh_mobile_ceu.h>
#include <video/sh_mobile_lcdc.h>
#include <asm/io.h>
#include <asm/clock.h>
#include <asm/suspend.h>
#include <cpu/sh7723.h>
#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
static phys_addr_t ceu_dma_membase;
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
......@@ -253,150 +258,25 @@ static struct platform_device lcdc_device = {
},
};
static void camera_power(int val)
{
gpio_set_value(GPIO_PTZ5, val); /* RST_CAM/RSTB */
mdelay(10);
}
#ifdef CONFIG_I2C
/* support for the old ncm03j camera */
static unsigned char camera_ncm03j_magic[] =
{
0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36,
0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F,
0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55,
0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12,
0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0,
0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F,
0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A,
0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A,
0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A,
0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56,
0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37,
0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A,
0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56,
0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC,
0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
};
static int camera_probe(void)
{
struct i2c_adapter *a = i2c_get_adapter(0);
struct i2c_msg msg;
int ret;
if (!a)
return -ENODEV;
camera_power(1);
msg.addr = 0x6e;
msg.buf = camera_ncm03j_magic;
msg.len = 2;
msg.flags = 0;
ret = i2c_transfer(a, &msg, 1);
camera_power(0);
return ret;
}
static int camera_set_capture(struct soc_camera_platform_info *info,
int enable)
{
struct i2c_adapter *a = i2c_get_adapter(0);
struct i2c_msg msg;
int ret = 0;
int i;
camera_power(0);
if (!enable)
return 0; /* no disable for now */
camera_power(1);
for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
u_int8_t buf[8];
msg.addr = 0x6e;
msg.buf = buf;
msg.len = 2;
msg.flags = 0;
buf[0] = camera_ncm03j_magic[i];
buf[1] = camera_ncm03j_magic[i + 1];
ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
}
return ret;
}
static int ap325rxa_camera_add(struct soc_camera_device *icd);
static void ap325rxa_camera_del(struct soc_camera_device *icd);
static struct soc_camera_platform_info camera_info = {
.format_name = "UYVY",
.format_depth = 16,
.format = {
.code = MEDIA_BUS_FMT_UYVY8_2X8,
.colorspace = V4L2_COLORSPACE_SMPTE170M,
.field = V4L2_FIELD_NONE,
.width = 640,
.height = 480,
/* Powerdown/reset gpios for CEU image sensors */
static struct gpiod_lookup_table ov7725_gpios = {
.dev_id = "0-0021",
.table = {
GPIO_LOOKUP("sh7723_pfc", GPIO_PTZ5, "reset", GPIO_ACTIVE_LOW),
},
.mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
V4L2_MBUS_DATA_ACTIVE_HIGH,
.mbus_type = V4L2_MBUS_PARALLEL,
.set_capture = camera_set_capture,
};
static struct soc_camera_link camera_link = {
.bus_id = 0,
.add_device = ap325rxa_camera_add,
.del_device = ap325rxa_camera_del,
.module_name = "soc_camera_platform",
.priv = &camera_info,
};
static struct platform_device *camera_device;
static void ap325rxa_camera_release(struct device *dev)
{
soc_camera_platform_release(&camera_device);
}
static int ap325rxa_camera_add(struct soc_camera_device *icd)
{
int ret = soc_camera_platform_add(icd, &camera_device, &camera_link,
ap325rxa_camera_release, 0);
if (ret < 0)
return ret;
ret = camera_probe();
if (ret < 0)
soc_camera_platform_del(icd, camera_device, &camera_link);
return ret;
}
static void ap325rxa_camera_del(struct soc_camera_device *icd)
{
soc_camera_platform_del(icd, camera_device, &camera_link);
}
#endif /* CONFIG_I2C */
static int ov7725_power(struct device *dev, int mode)
{
camera_power(0);
if (mode)
camera_power(1);
return 0;
}
static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
.flags = SH_CEU_FLAG_USE_8BIT_BUS,
static struct ceu_platform_data ceu0_pdata = {
.num_subdevs = 1,
.subdevs = {
{ /* [0] = ov7725 */
.flags = 0,
.bus_width = 8,
.bus_shift = 0,
.i2c_adapter_id = 0,
.i2c_address = 0x21,
},
},
};
static struct resource ceu_resources[] = {
......@@ -410,18 +290,15 @@ static struct resource ceu_resources[] = {
.start = evt2irq(0x880),
.flags = IORESOURCE_IRQ,
},
[2] = {
/* place holder for contiguous memory */
},
};
static struct platform_device ceu_device = {
.name = "sh_mobile_ceu",
.id = 0, /* "ceu0" clock */
static struct platform_device ap325rxa_ceu_device = {
.name = "renesas-ceu",
.id = 0, /* "ceu.0" clock */
.num_resources = ARRAY_SIZE(ceu_resources),
.resource = ceu_resources,
.dev = {
.platform_data = &sh_mobile_ceu_info,
.platform_data = &ceu0_pdata,
},
};
......@@ -488,44 +365,18 @@ static struct platform_device sdhi1_cn7_device = {
},
};
static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
{
I2C_BOARD_INFO("pcf8563", 0x51),
},
};
static struct i2c_board_info ap325rxa_i2c_camera[] = {
{
I2C_BOARD_INFO("ov772x", 0x21),
},
};
static struct ov772x_camera_info ov7725_info = {
.flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
.edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0),
};
static struct soc_camera_link ov7725_link = {
.bus_id = 0,
.power = ov7725_power,
.board_info = &ap325rxa_i2c_camera[0],
.i2c_adapter_id = 0,
.priv = &ov7725_info,
};
static struct platform_device ap325rxa_camera[] = {
static struct i2c_board_info ap325rxa_i2c_devices[] __initdata = {
{
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
.platform_data = &ov7725_link,
},
}, {
.name = "soc-camera-pdrv",
.id = 1,
.dev = {
.platform_data = &camera_link,
},
I2C_BOARD_INFO("pcf8563", 0x51),
},
{
I2C_BOARD_INFO("ov772x", 0x21),
.platform_data = &ov7725_info,
},
};
......@@ -533,12 +384,9 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
&smsc9118_device,
&ap325rxa_nor_flash_device,
&lcdc_device,
&ceu_device,
&nand_flash_device,
&sdhi0_cn3_device,
&sdhi1_cn7_device,
&ap325rxa_camera[0],
&ap325rxa_camera[1],
};
extern char ap325rxa_sdram_enter_start;
......@@ -649,8 +497,6 @@ static int __init ap325rxa_devices_setup(void)
__raw_writew(0xFFFF, PORT_DRVCRA);
__raw_writew(0xFFFF, PORT_DRVCRB);
platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
/* SDHI0 - CN3 - SD CARD */
gpio_request(GPIO_FN_SDHI0CD_PTD, NULL);
gpio_request(GPIO_FN_SDHI0WP_PTD, NULL);
......@@ -670,9 +516,25 @@ static int __init ap325rxa_devices_setup(void)
gpio_request(GPIO_FN_SDHI1CMD, NULL);
gpio_request(GPIO_FN_SDHI1CLK, NULL);
/* Add a clock alias for ov7725 xclk source. */
clk_add_alias(NULL, "0-0021", "video_clk", NULL);
/* Register RSTB gpio for ov7725 camera sensor. */
gpiod_add_lookup_table(&ov7725_gpios);
i2c_register_board_info(0, ap325rxa_i2c_devices,
ARRAY_SIZE(ap325rxa_i2c_devices));
/* Initialize CEU platform device separately to map memory first */
device_initialize(&ap325rxa_ceu_device.dev);
arch_setup_pdev_archdata(&ap325rxa_ceu_device);
dma_declare_coherent_memory(&ap325rxa_ceu_device.dev,
ceu_dma_membase, ceu_dma_membase,
ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1,
DMA_MEMORY_EXCLUSIVE);
platform_device_add(&ap325rxa_ceu_device);
return platform_add_devices(ap325rxa_devices,
ARRAY_SIZE(ap325rxa_devices));
}
......@@ -689,7 +551,21 @@ static int ap325rxa_mode_pins(void)
return MODE_PIN5 | MODE_PIN8;
}
/* Reserve a portion of memory for CEU buffers */
static void __init ap325rxa_mv_mem_reserve(void)
{
phys_addr_t phys;
phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
phys = memblock_alloc_base(size, PAGE_SIZE, MEMBLOCK_ALLOC_ANYWHERE);
memblock_free(phys, size);
memblock_remove(phys, size);
ceu_dma_membase = phys;
}
static struct sh_machine_vector mv_ap325rxa __initmv = {
.mv_name = "AP-325RXA",
.mv_mode_pins = ap325rxa_mode_pins,
.mv_mem_reserve = ap325rxa_mv_mem_reserve,
};
arch/sh/kernel/cpu/sh4a/clock-sh7723.c
View file @ 39fb9930
......@@ -260,7 +260,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("veu1", &mstp_clks[HWBLK_VEU2H1]),
CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]),
CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU]),
CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[HWBLK_CEU]),
CLKDEV_DEV_ID("ceu.0", &mstp_clks[HWBLK_CEU]),
CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU2H0]),
CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]),
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7