Commit 3a36dd06 authored by Lukasz Majewski's avatar Lukasz Majewski Committed by Kukjin Kim

ARM: EXYNOS: Add s3c-hsotg device support for Universal C210 board

This patch adds platform data for using S3C-HSOTG driver at
Universal_C210 target.
Signed-off-by: default avatarLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent 8d07dbb9
......@@ -250,6 +250,7 @@ config MACH_UNIVERSAL_C210
select S3C_DEV_I2C1
select S3C_DEV_I2C3
select S3C_DEV_I2C5
select S3C_DEV_USB_HSOTG
select S5P_DEV_I2C_HDMIPHY
select S5P_DEV_MFC
select S5P_DEV_ONENAND
......@@ -262,6 +263,7 @@ config MACH_UNIVERSAL_C210
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_FIMC
select S5P_SETUP_MIPIPHY
select EXYNOS4_SETUP_USB_PHY
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
......
......@@ -205,6 +205,7 @@ static struct regulator_init_data lp3974_ldo2_data = {
};
static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"),
......@@ -290,6 +291,7 @@ static struct regulator_init_data lp3974_ldo7_data = {
};
static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
};
......@@ -486,7 +488,10 @@ static struct regulator_init_data lp3974_vichg_data = {
static struct regulator_init_data lp3974_esafeout1_data = {
.constraints = {
.name = "SAFEOUT1",
.min_uV = 4800000,
.max_uV = 4800000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
......@@ -994,6 +999,9 @@ static struct gpio universal_camera_gpios[] = {
{ GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
};
/* USB OTG */
static struct s3c_hsotg_plat universal_hsotg_pdata;
static void __init universal_camera_init(void)
{
s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
......@@ -1049,6 +1057,7 @@ static struct platform_device *universal_devices[] __initdata = {
&s5p_device_onenand,
&s5p_device_fimd0,
&s5p_device_jpeg,
&s3c_device_usb_hsotg,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
......@@ -1102,6 +1111,7 @@ static void __init universal_machine_init(void)
i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
ARRAY_SIZE(i2c_gpio12_devs));
s3c_hsotg_set_platdata(&universal_hsotg_pdata);
universal_camera_init();
/* Last */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment