Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_it821x: Driver updates and reworking
  libata.h: replace __FUNCTION__ with __func__
  ata_piix: subsys 106b:00a3 is apple ich8m too
  libata-core: make sure that ata_force_tbl is freed in case of an error
  libata: update atapi disable handling
  pata_via: add VX800 flag; add function for fixing h/w bugs
  pata_ali: misplaced pci_dev_put()

drivers/ata/ata_piix.c

@@ -250,6 +250,7 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	/* Mobile SATA Controller IDE (ICH8M), Apple */
 	{ 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata },
 	{ 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata },
+	{ 0x8086, 0x2828, 0x106b, 0x00a3, 0, 0, ich8m_apple_sata },
 	/* Mobile SATA Controller IDE (ICH8M) */
 	{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (ICH9) */

drivers/ata/libata-core.c

@@ -120,7 +120,7 @@ static char ata_force_param_buf[PAGE_SIZE] __initdata;
 module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0);
 MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)");
 
-int atapi_enabled = 1;
+static int atapi_enabled = 1;
 module_param(atapi_enabled, int, 0444);
 MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
 
@@ -1132,6 +1132,8 @@ void ata_id_string(const u16 *id, unsigned char *s,
 {
 	unsigned int c;
 
+	BUG_ON(len & 1);
+
 	while (len > 0) {
 		c = id[ofs] >> 8;
 		*s = c;
@@ -1165,8 +1167,6 @@ void ata_id_c_string(const u16 *id, unsigned char *s,
 {
 	unsigned char *p;
 
-	WARN_ON(!(len & 1));
-
 	ata_id_string(id, s, ofs, len - 1);
 
 	p = s + strnlen(s, len - 1);
@@ -1885,6 +1885,23 @@ static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
 	return 3 << ATA_SHIFT_PIO;
 }
 
+/**
+ *	ata_do_dev_read_id		-	default ID read method
+ *	@dev: device
+ *	@tf: proposed taskfile
+ *	@id: data buffer
+ *
+ *	Issue the identify taskfile and hand back the buffer containing
+ *	identify data. For some RAID controllers and for pre ATA devices
+ *	this function is wrapped or replaced by the driver
+ */
+unsigned int ata_do_dev_read_id(struct ata_device *dev,
+					struct ata_taskfile *tf, u16 *id)
+{
+	return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE,
+				     id, sizeof(id[0]) * ATA_ID_WORDS, 0);
+}
+
 /**
  *	ata_dev_read_id - Read ID data from the specified device
  *	@dev: target device
@@ -1920,7 +1937,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 	if (ata_msg_ctl(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
 
- retry:
+retry:
 	ata_tf_init(dev, &tf);
 
 	switch (class) {
@@ -1948,8 +1965,11 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 	 */
 	tf.flags |= ATA_TFLAG_POLLING;
 
-	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
-				     id, sizeof(id[0]) * ATA_ID_WORDS, 0);
+	if (ap->ops->read_id)
+		err_mask = ap->ops->read_id(dev, &tf, id);
+	else
+		err_mask = ata_do_dev_read_id(dev, &tf, id);
+
 	if (err_mask) {
 		if (err_mask & AC_ERR_NODEV_HINT) {
 			ata_dev_printk(dev, KERN_DEBUG,
@@ -2142,6 +2162,16 @@ int ata_dev_configure(struct ata_device *dev)
 		return 0;
 	}
 
+	if ((!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) &&
+	    dev->class == ATA_DEV_ATAPI) {
+		ata_dev_printk(dev, KERN_WARNING,
+			"WARNING: ATAPI is %s, device ignored.\n",
+			atapi_enabled ? "not supported with this driver"
+				      : "disabled");
+		ata_dev_disable(dev);
+		return 0;
+	}
+
 	/* let ACPI work its magic */
 	rc = ata_acpi_on_devcfg(dev);
 	if (rc)
@@ -6088,16 +6118,20 @@ static int __init ata_init(void)
 
 	ata_wq = create_workqueue("ata");
 	if (!ata_wq)
-		return -ENOMEM;
+		goto free_force_tbl;
 
 	ata_aux_wq = create_singlethread_workqueue("ata_aux");
-	if (!ata_aux_wq) {
-		destroy_workqueue(ata_wq);
-		return -ENOMEM;
-	}
+	if (!ata_aux_wq)
+		goto free_wq;
 
 	printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
 	return 0;
+
+free_wq:
+	destroy_workqueue(ata_wq);
+free_force_tbl:
+	kfree(ata_force_tbl);
+	return -ENOMEM;
 }
 
 static void __exit ata_exit(void)
@@ -6269,6 +6303,7 @@ EXPORT_SYMBOL_GPL(ata_host_resume);
 #endif /* CONFIG_PM */
 EXPORT_SYMBOL_GPL(ata_id_string);
 EXPORT_SYMBOL_GPL(ata_id_c_string);
+EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
 
 EXPORT_SYMBOL_GPL(ata_pio_need_iordy);

drivers/ata/libata-scsi.c

@@ -2550,36 +2550,6 @@ static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap,
 	return ata_find_dev(ap, devno);
 }
 
-/**
- *	ata_scsi_dev_enabled - determine if device is enabled
- *	@dev: ATA device
- *
- *	Determine if commands should be sent to the specified device.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	0 if commands are not allowed / 1 if commands are allowed
- */
-
-static int ata_scsi_dev_enabled(struct ata_device *dev)
-{
-	if (unlikely(!ata_dev_enabled(dev)))
-		return 0;
-
-	if (!atapi_enabled || (dev->link->ap->flags & ATA_FLAG_NO_ATAPI)) {
-		if (unlikely(dev->class == ATA_DEV_ATAPI)) {
-			ata_dev_printk(dev, KERN_WARNING,
-				       "WARNING: ATAPI is %s, device ignored.\n",
-				       atapi_enabled ? "not supported with this driver" : "disabled");
-			return 0;
-		}
-	}
-
-	return 1;
-}
-
 /**
  *	ata_scsi_find_dev - lookup ata_device from scsi_cmnd
  *	@ap: ATA port to which the device is attached
@@ -2601,7 +2571,7 @@ ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev)
 {
 	struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev);
 
-	if (unlikely(!dev || !ata_scsi_dev_enabled(dev)))
+	if (unlikely(!dev || !ata_dev_enabled(dev)))
 		return NULL;
 
 	return dev;
@@ -3622,7 +3592,7 @@ int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
 
 	ata_scsi_dump_cdb(ap, cmd);
 
-	if (likely(ata_scsi_dev_enabled(ap->link.device)))
+	if (likely(ata_dev_enabled(ap->link.device)))
 		rc = __ata_scsi_queuecmd(cmd, done, ap->link.device);
 	else {
 		cmd->result = (DID_BAD_TARGET << 16);

drivers/ata/libata.h

@@ -66,7 +66,6 @@ enum {
 
 extern unsigned int ata_print_id;
 extern struct workqueue_struct *ata_aux_wq;
-extern int atapi_enabled;
 extern int atapi_passthru16;
 extern int libata_fua;
 extern int libata_noacpi;

drivers/ata/pata_ali.c

@@ -550,8 +550,9 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		pci_read_config_byte(isa_bridge, 0x5E, &tmp);
 		if ((tmp & 0x1E) == 0x12)
 	        	ppi[0] = &info_20_udma;
-		pci_dev_put(isa_bridge);
 	}
+	pci_dev_put(isa_bridge);
+
 	return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL);
 }
 

drivers/ata/pata_via.c

@@ -98,7 +98,8 @@ static const struct via_isa_bridge {
 	u8 rev_max;
 	u16 flags;
 } via_isa_bridges[] = {
-	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, VIA_UDMA_133 |
+	VIA_BAD_AST | VIA_SATA_PATA },
 	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
@@ -322,6 +323,65 @@ static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	via_do_set_mode(ap, adev, adev->dma_mode, tclock[mode], set_ast, udma[mode]);
 }
 
+/**
+ *	via_ata_sff_tf_load - send taskfile registers to host controller
+ *	@ap: Port to which output is sent
+ *	@tf: ATA taskfile register set
+ *
+ *	Outputs ATA taskfile to standard ATA host controller.
+ *
+ *	Note: This is to fix the internal bug of via chipsets, which
+ *  will reset the device register after changing the IEN bit on
+ *  ctl register
+ */
+static void via_ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+	if (tf->ctl != ap->last_ctl) {
+		iowrite8(tf->ctl, ioaddr->ctl_addr);
+		iowrite8(tf->device, ioaddr->device_addr);
+		ap->last_ctl = tf->ctl;
+		ata_wait_idle(ap);
+	}
+
+	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+		iowrite8(tf->hob_feature, ioaddr->feature_addr);
+		iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
+		iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
+		iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
+		iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
+		VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+			tf->hob_feature,
+			tf->hob_nsect,
+			tf->hob_lbal,
+			tf->hob_lbam,
+			tf->hob_lbah);
+	}
+
+	if (is_addr) {
+		iowrite8(tf->feature, ioaddr->feature_addr);
+		iowrite8(tf->nsect, ioaddr->nsect_addr);
+		iowrite8(tf->lbal, ioaddr->lbal_addr);
+		iowrite8(tf->lbam, ioaddr->lbam_addr);
+		iowrite8(tf->lbah, ioaddr->lbah_addr);
+		VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+			tf->feature,
+			tf->nsect,
+			tf->lbal,
+			tf->lbam,
+			tf->lbah);
+	}
+
+	if (tf->flags & ATA_TFLAG_DEVICE) {
+		iowrite8(tf->device, ioaddr->device_addr);
+		VPRINTK("device 0x%X\n", tf->device);
+	}
+
+	ata_wait_idle(ap);
+}
+
 static struct scsi_host_template via_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
@@ -332,11 +392,13 @@ static struct ata_port_operations via_port_ops = {
 	.set_piomode	= via_set_piomode,
 	.set_dmamode	= via_set_dmamode,
 	.prereset	= via_pre_reset,
+	.sff_tf_load = via_ata_tf_load,
 };
 
 static struct ata_port_operations via_port_ops_noirq = {
 	.inherits	= &via_port_ops,
 	.sff_data_xfer	= ata_sff_data_xfer_noirq,
+	.sff_tf_load = via_ata_tf_load,
 };
 
 /**

include/linux/libata.h

@@ -60,9 +60,9 @@
 
 /* note: prints function name for you */
 #ifdef ATA_DEBUG
-#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 #ifdef ATA_VERBOSE_DEBUG
-#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 #else
 #define VPRINTK(fmt, args...)
 #endif	/* ATA_VERBOSE_DEBUG */
@@ -71,7 +71,7 @@
 #define VPRINTK(fmt, args...)
 #endif	/* ATA_DEBUG */
 
-#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 
 /* NEW: debug levels */
 #define HAVE_LIBATA_MSG 1
@@ -750,6 +750,7 @@ struct ata_port_operations {
 	void (*set_piomode)(struct ata_port *ap, struct ata_device *dev);
 	void (*set_dmamode)(struct ata_port *ap, struct ata_device *dev);
 	int  (*set_mode)(struct ata_link *link, struct ata_device **r_failed_dev);
+	unsigned int (*read_id)(struct ata_device *dev, struct ata_taskfile *tf, u16 *id);
 
 	void (*dev_config)(struct ata_device *dev);
 
@@ -951,6 +952,8 @@ extern void ata_id_string(const u16 *id, unsigned char *s,
 			  unsigned int ofs, unsigned int len);
 extern void ata_id_c_string(const u16 *id, unsigned char *s,
 			    unsigned int ofs, unsigned int len);
+extern unsigned int ata_do_dev_read_id(struct ata_device *dev,
+					struct ata_taskfile *tf, u16 *id);
 extern void ata_qc_complete(struct ata_queued_cmd *qc);
 extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active);
 extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,