drm/msm: dsi: add support for DSI-PHY on SM8650

Add DSI PHY support for the SM8650 platform.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/564976/
Link: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-mdss-v2-7-43f1887c82b8@linaro.orgSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drivers/gpu/drm/msm/dsi/phy/dsi_phy.c

@@ -587,6 +587,8 @@ static const struct of_device_id dsi_phy_dt_match[] = {
 	  .data = &dsi_phy_5nm_8450_cfgs },
 	{ .compatible = "qcom,sm8550-dsi-phy-4nm",
 	  .data = &dsi_phy_4nm_8550_cfgs },
+	{ .compatible = "qcom,sm8650-dsi-phy-4nm",
+	  .data = &dsi_phy_4nm_8650_cfgs },
 #endif
 	{}
 };

drivers/gpu/drm/msm/dsi/phy/dsi_phy.h

@@ -62,6 +62,7 @@ extern const struct msm_dsi_phy_cfg dsi_phy_7nm_7280_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8350_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_5nm_8450_cfgs;
 extern const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_4nm_8650_cfgs;
 
 struct msm_dsi_dphy_timing {
 	u32 clk_zero;

drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c

@@ -1121,6 +1121,10 @@ static const struct regulator_bulk_data dsi_phy_7nm_37750uA_regulators[] = {
 	{ .supply = "vdds", .init_load_uA = 37550 },
 };
 
+static const struct regulator_bulk_data dsi_phy_7nm_98000uA_regulators[] = {
+	{ .supply = "vdds", .init_load_uA = 98000 },
+};
+
 static const struct regulator_bulk_data dsi_phy_7nm_97800uA_regulators[] = {
 	{ .supply = "vdds", .init_load_uA = 97800 },
 };
@@ -1281,3 +1285,26 @@ const struct msm_dsi_phy_cfg dsi_phy_4nm_8550_cfgs = {
 	.num_dsi_phy = 2,
 	.quirks = DSI_PHY_7NM_QUIRK_V5_2,
 };
+
+const struct msm_dsi_phy_cfg dsi_phy_4nm_8650_cfgs = {
+	.has_phy_lane = true,
+	.regulator_data = dsi_phy_7nm_98000uA_regulators,
+	.num_regulators = ARRAY_SIZE(dsi_phy_7nm_98000uA_regulators),
+	.ops = {
+		.enable = dsi_7nm_phy_enable,
+		.disable = dsi_7nm_phy_disable,
+		.pll_init = dsi_pll_7nm_init,
+		.save_pll_state = dsi_7nm_pll_save_state,
+		.restore_pll_state = dsi_7nm_pll_restore_state,
+		.set_continuous_clock = dsi_7nm_set_continuous_clock,
+	},
+	.min_pll_rate = 600000000UL,
+#ifdef CONFIG_64BIT
+	.max_pll_rate = 5000000000UL,
+#else
+	.max_pll_rate = ULONG_MAX,
+#endif
+	.io_start = { 0xae95000, 0xae97000 },
+	.num_dsi_phy = 2,
+	.quirks = DSI_PHY_7NM_QUIRK_V5_2,
+};