Commit 3aaf4d95 authored by Dave Airlie's avatar Dave Airlie

Merge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next

Here are the Mali DP driver changes. They include the mali-dp specific
changes from Jose Abreu on crtc->mode_valid() as well as a couple of
patches for fixing the sharing of IRQ lines and use of DRM CMA helper
for framebuffer physical address calculation. Please pull!

* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
  drm/arm: mali-dp: Use CMA helper for plane buffer address calculation
  drm/mali-dp: Check PM status when sharing interrupt lines
  drm/arm: malidp: Use crtc->mode_valid() callback
parents d02b0ffb e40eda3d
......@@ -22,9 +22,8 @@
#include "malidp_drv.h"
#include "malidp_hw.h"
static bool malidp_crtc_mode_fixup(struct drm_crtc *crtc,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
static enum drm_mode_status malidp_crtc_mode_valid(struct drm_crtc *crtc,
const struct drm_display_mode *mode)
{
struct malidp_drm *malidp = crtc_to_malidp_device(crtc);
struct malidp_hw_device *hwdev = malidp->dev;
......@@ -40,11 +39,11 @@ static bool malidp_crtc_mode_fixup(struct drm_crtc *crtc,
if (rate != req_rate) {
DRM_DEBUG_DRIVER("pxlclk doesn't support %ld Hz\n",
req_rate);
return false;
return MODE_NOCLOCK;
}
}
return true;
return MODE_OK;
}
static void malidp_crtc_enable(struct drm_crtc *crtc)
......@@ -408,7 +407,7 @@ static int malidp_crtc_atomic_check(struct drm_crtc *crtc,
}
static const struct drm_crtc_helper_funcs malidp_crtc_helper_funcs = {
.mode_fixup = malidp_crtc_mode_fixup,
.mode_valid = malidp_crtc_mode_valid,
.enable = malidp_crtc_enable,
.disable = malidp_crtc_disable,
.atomic_check = malidp_crtc_atomic_check,
......
......@@ -766,12 +766,17 @@ static irqreturn_t malidp_de_irq(int irq, void *arg)
u32 status, mask, dc_status;
irqreturn_t ret = IRQ_NONE;
if (!drm->dev_private)
return IRQ_HANDLED;
hwdev = malidp->dev;
de = &hwdev->map.de_irq_map;
/*
* if we are suspended it is likely that we were invoked because
* we share an interrupt line with some other driver, don't try
* to read the hardware registers
*/
if (hwdev->pm_suspended)
return IRQ_NONE;
/* first handle the config valid IRQ */
dc_status = malidp_hw_read(hwdev, hwdev->map.dc_base + MALIDP_REG_STATUS);
if (dc_status & hwdev->map.dc_irq_map.vsync_irq) {
......@@ -854,6 +859,14 @@ static irqreturn_t malidp_se_irq(int irq, void *arg)
struct malidp_hw_device *hwdev = malidp->dev;
u32 status, mask;
/*
* if we are suspended it is likely that we were invoked because
* we share an interrupt line with some other driver, don't try
* to read the hardware registers
*/
if (hwdev->pm_suspended)
return IRQ_NONE;
status = malidp_hw_read(hwdev, hwdev->map.se_base + MALIDP_REG_STATUS);
if (!(status & hwdev->map.se_irq_map.irq_mask))
return IRQ_NONE;
......
......@@ -264,11 +264,9 @@ static void malidp_de_set_plane_pitches(struct malidp_plane *mp,
static void malidp_de_plane_update(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
struct drm_gem_cma_object *obj;
struct malidp_plane *mp;
const struct malidp_hw_regmap *map;
struct malidp_plane_state *ms = to_malidp_plane_state(plane->state);
u16 ptr;
u32 src_w, src_h, dest_w, dest_h, val;
int i;
......@@ -285,12 +283,12 @@ static void malidp_de_plane_update(struct drm_plane *plane,
for (i = 0; i < ms->n_planes; i++) {
/* calculate the offset for the layer's plane registers */
ptr = mp->layer->ptr + (i << 4);
u16 ptr = mp->layer->ptr + (i << 4);
dma_addr_t fb_addr = drm_fb_cma_get_gem_addr(plane->state->fb,
plane->state, i);
obj = drm_fb_cma_get_gem_obj(plane->state->fb, i);
obj->paddr += plane->state->fb->offsets[i];
malidp_hw_write(mp->hwdev, lower_32_bits(obj->paddr), ptr);
malidp_hw_write(mp->hwdev, upper_32_bits(obj->paddr), ptr + 4);
malidp_hw_write(mp->hwdev, lower_32_bits(fb_addr), ptr);
malidp_hw_write(mp->hwdev, upper_32_bits(fb_addr), ptr + 4);
}
malidp_de_set_plane_pitches(mp, ms->n_planes,
plane->state->fb->pitches);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment