ALSA: hda - Fix probe of Toshiba laptops with ALC268 codec

There are many variants of Toshiba laptops with ALC268 codec, and
it seems that a few of them don't work with model=toshiba preset
since they have the secondary ALC268 codec just for HDMI output.
This is a regression due to the previous clean-up work to merge all
Toshiba quirk entries into a single check.

This patch adds the identification of such laptops to apply the
standard BIOS-probing method.  Unfortunately, Toshiba laptops have
all the same PCI SSID, so we need to check the codec SSID to identify
each device.
Tested-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

sound/pci/hda/patch_realtek.c

@@ -12521,8 +12521,6 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = {
 			   ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
 	SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
-	SND_PCI_QUIRK_MASK(0x1179, 0xff00, 0xff00, "TOSHIBA A/Lx05",
-			   ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER),
 	SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1),
@@ -12530,6 +12528,15 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = {
 	{}
 };
 
+/* Toshiba laptops have no unique PCI SSID but only codec SSID */
+static struct snd_pci_quirk alc268_ssid_cfg_tbl[] = {
+	SND_PCI_QUIRK(0x1179, 0xff0a, "TOSHIBA X-200", ALC268_AUTO),
+	SND_PCI_QUIRK(0x1179, 0xff0e, "TOSHIBA X-200 HDMI", ALC268_AUTO),
+	SND_PCI_QUIRK_MASK(0x1179, 0xff00, 0xff00, "TOSHIBA A/Lx05",
+			   ALC268_TOSHIBA),
+	{}
+};
+
 static struct alc_config_preset alc268_presets[] = {
 	[ALC267_QUANTA_IL1] = {
 		.mixers = { alc267_quanta_il1_mixer, alc268_beep_mixer },
@@ -12696,6 +12703,10 @@ static int patch_alc268(struct hda_codec *codec)
 						  alc268_models,
 						  alc268_cfg_tbl);
 
+	if (board_config < 0 || board_config >= ALC268_MODEL_LAST)
+		board_config = snd_hda_check_board_codec_sid_config(codec,
+			ALC882_MODEL_LAST, alc268_models, alc268_ssid_cfg_tbl);
+
 	if (board_config < 0 || board_config >= ALC268_MODEL_LAST) {
 		printk(KERN_INFO "hda_codec: Unknown model for %s, "
 		       "trying auto-probe from BIOS...\n", codec->chip_name);