x86: cleanup x86_cpu_to_apicid references

Clean up references to x86_cpu_to_apicid.  Removes extraneous
comments and standardizes on "x86_*_early_ptr" for the early
kernel init references.
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

arch/x86/kernel/genapic_64.c

@@ -24,17 +24,10 @@
 #include <acpi/acpi_bus.h>
 #endif
 
-/*
- * which logical CPU number maps to which CPU (physical APIC ID)
- *
- * The following static array is used during kernel startup
- * and the x86_cpu_to_apicid_ptr contains the address of the
- * array during this time.  Is it zeroed when the per_cpu
- * data area is removed.
- */
+/* which logical CPU number maps to which CPU (physical APIC ID) */
 u16 x86_cpu_to_apicid_init[NR_CPUS] __initdata
 					= { [0 ... NR_CPUS-1] = BAD_APICID };
-void *x86_cpu_to_apicid_ptr;
+void *x86_cpu_to_apicid_early_ptr;
 DEFINE_PER_CPU(u16, x86_cpu_to_apicid) = BAD_APICID;
 EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
 

arch/x86/kernel/mpparse_64.c

@@ -125,14 +125,9 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
 		cpu = 0;
  	}
 	bios_cpu_apicid[cpu] = m->mpc_apicid;
-	/*
-	 * We get called early in the the start_kernel initialization
-	 * process when the per_cpu data area is not yet setup, so we
-	 * use a static array that is removed after the per_cpu data
-	 * area is created.
-	 */
-	if (x86_cpu_to_apicid_ptr) {
-		u16 *x86_cpu_to_apicid = (u16 *)x86_cpu_to_apicid_ptr;
+	/* are we being called early in kernel startup? */
+	if (x86_cpu_to_apicid_early_ptr) {
+		u16 *x86_cpu_to_apicid = (u16 *)x86_cpu_to_apicid_early_ptr;
 		x86_cpu_to_apicid[cpu] = m->mpc_apicid;
 	} else {
 		per_cpu(x86_cpu_to_apicid, cpu) = m->mpc_apicid;

arch/x86/kernel/setup_64.c

@@ -360,7 +360,7 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_SMP
 	/* setup to use the static apicid table during kernel startup */
-	x86_cpu_to_apicid_ptr = (void *)&x86_cpu_to_apicid_init;
+	x86_cpu_to_apicid_early_ptr = (void *)&x86_cpu_to_apicid_init;
 #endif
 
 #ifdef CONFIG_ACPI

arch/x86/kernel/smpboot_32.c

@@ -91,15 +91,10 @@ static cpumask_t smp_commenced_mask;
 DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
 EXPORT_PER_CPU_SYMBOL(cpu_info);
 
-/*
- * The following static array is used during kernel startup
- * and the x86_cpu_to_apicid_ptr contains the address of the
- * array during this time.  Is it zeroed when the per_cpu
- * data area is removed.
- */
+/* which logical CPU number maps to which CPU (physical APIC ID) */
 u8 x86_cpu_to_apicid_init[NR_CPUS] __initdata =
 			{ [0 ... NR_CPUS-1] = BAD_APICID };
-void *x86_cpu_to_apicid_ptr;
+void *x86_cpu_to_apicid_early_ptr;
 DEFINE_PER_CPU(u8, x86_cpu_to_apicid) = BAD_APICID;
 EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
 

arch/x86/kernel/smpboot_64.c

@@ -852,23 +852,25 @@ static int __init smp_sanity_check(unsigned max_cpus)
 }
 
 /*
- * Copy apicid's found by MP_processor_info from initial array to the per cpu
- * data area.  The x86_cpu_to_apicid_init array is then expendable and the
- * x86_cpu_to_apicid_ptr is zeroed indicating that the static array is no
- * longer available.
+ * Copy data used in early init routines from the initial arrays to the
+ * per cpu data areas.  These arrays then become expendable and the
+ * *_ptrs are zeroed indicating that the static arrays are gone.
  */
 void __init smp_set_apicids(void)
 {
 	int cpu;
 
-	for_each_cpu_mask(cpu, cpu_possible_map) {
+	for_each_possible_cpu(cpu) {
 		if (per_cpu_offset(cpu))
 			per_cpu(x86_cpu_to_apicid, cpu) =
 						x86_cpu_to_apicid_init[cpu];
+		else
+			printk(KERN_NOTICE "per_cpu_offset zero for cpu %d\n",
+									cpu);
 	}
 
-	/* indicate the static array will be going away soon */
-	x86_cpu_to_apicid_ptr = NULL;
+	/* indicate the early static arrays are gone */
+	x86_cpu_to_apicid_early_ptr = NULL;
 }
 
 static void __init smp_cpu_index_default(void)

include/asm-x86/smp_32.h

@@ -30,7 +30,7 @@ extern void (*mtrr_hook) (void);
 extern void zap_low_mappings (void);
 
 extern u8 __initdata x86_cpu_to_apicid_init[];
-extern void *x86_cpu_to_apicid_ptr;
+extern void *x86_cpu_to_apicid_early_ptr;
 
 DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
 DECLARE_PER_CPU(cpumask_t, cpu_core_map);

include/asm-x86/smp_64.h

@@ -27,7 +27,7 @@ extern int smp_call_function_mask(cpumask_t mask, void (*func)(void *),
 				  void *info, int wait);
 
 extern u16 __initdata x86_cpu_to_apicid_init[];
-extern void *x86_cpu_to_apicid_ptr;
+extern void *x86_cpu_to_apicid_early_ptr;
 extern u16 bios_cpu_apicid[];
 
 DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);