Commit 3b43ad20 authored by Manjunathappa, Prakash's avatar Manjunathappa, Prakash Committed by Tomi Valkeinen

da8xx-fb: cleanup LCDC configurations

Configure below LCDC configurations to optimal values, also have an
option configure these optional parameters for platform.
1) AC bias configuration: Required only for passive panels
2) Dma_burst_size:
3) FIFO_DMA_DELAY:
4) FIFO threshold: Does not apply for da830 LCDC.

Patch is verified for 16bpp and 24bpp configurations on da830, da850 and
am335x EVMs.
Signed-off-by: default avatarManjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
parent f772fabd
......@@ -518,29 +518,9 @@ void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
}
}
static const struct display_panel disp_panel = {
QVGA,
16,
16,
COLOR_ACTIVE,
};
static struct lcd_ctrl_config lcd_cfg = {
&disp_panel,
.ac_bias = 255,
.ac_bias_intrpt = 0,
.dma_burst_sz = 16,
.panel_shade = COLOR_ACTIVE,
.bpp = 16,
.fdd = 255,
.tft_alt_mode = 0,
.stn_565_mode = 0,
.mono_8bit_mode = 0,
.invert_line_clock = 1,
.invert_frm_clock = 1,
.sync_edge = 0,
.sync_ctrl = 1,
.raster_order = 0,
.fifo_th = 6,
};
struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata = {
......
......@@ -226,7 +226,8 @@ static struct fb_videomode known_lcd_panels[] = {
.lower_margin = 2,
.hsync_len = 0,
.vsync_len = 0,
.sync = FB_SYNC_CLK_INVERT,
.sync = FB_SYNC_CLK_INVERT |
FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
/* Sharp LK043T1DG01 */
[1] = {
......@@ -240,7 +241,7 @@ static struct fb_videomode known_lcd_panels[] = {
.lower_margin = 2,
.hsync_len = 41,
.vsync_len = 10,
.sync = 0,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.flag = 0,
},
[2] = {
......@@ -255,7 +256,7 @@ static struct fb_videomode known_lcd_panels[] = {
.lower_margin = 10,
.hsync_len = 10,
.vsync_len = 10,
.sync = 0,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.flag = 0,
},
};
......@@ -387,10 +388,9 @@ static int lcd_cfg_dma(int burst_size, int fifo_th)
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_8);
break;
case 16:
default:
reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16);
break;
default:
return -EINVAL;
}
reg |= (fifo_th << 8);
......@@ -435,7 +435,8 @@ static void lcd_cfg_vertical_sync(int back_porch, int pulse_width,
lcdc_write(reg, LCD_RASTER_TIMING_1_REG);
}
static int lcd_cfg_display(const struct lcd_ctrl_config *cfg)
static int lcd_cfg_display(const struct lcd_ctrl_config *cfg,
struct fb_videomode *panel)
{
u32 reg;
u32 reg_int;
......@@ -444,7 +445,7 @@ static int lcd_cfg_display(const struct lcd_ctrl_config *cfg)
LCD_MONO_8BIT_MODE |
LCD_MONOCHROME_MODE);
switch (cfg->p_disp_panel->panel_shade) {
switch (cfg->panel_shade) {
case MONOCHROME:
reg |= LCD_MONOCHROME_MODE;
if (cfg->mono_8bit_mode)
......@@ -457,7 +458,9 @@ static int lcd_cfg_display(const struct lcd_ctrl_config *cfg)
break;
case COLOR_PASSIVE:
if (cfg->stn_565_mode)
/* AC bias applicable only for Pasive panels */
lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt);
if (cfg->bpp == 12 && cfg->stn_565_mode)
reg |= LCD_STN_565_ENABLE;
break;
......@@ -478,22 +481,19 @@ static int lcd_cfg_display(const struct lcd_ctrl_config *cfg)
reg = lcdc_read(LCD_RASTER_TIMING_2_REG);
if (cfg->sync_ctrl)
reg |= LCD_SYNC_CTRL;
else
reg &= ~LCD_SYNC_CTRL;
reg |= LCD_SYNC_CTRL;
if (cfg->sync_edge)
reg |= LCD_SYNC_EDGE;
else
reg &= ~LCD_SYNC_EDGE;
if (cfg->invert_line_clock)
if (panel->sync & FB_SYNC_HOR_HIGH_ACT)
reg |= LCD_INVERT_LINE_CLOCK;
else
reg &= ~LCD_INVERT_LINE_CLOCK;
if (cfg->invert_frm_clock)
if (panel->sync & FB_SYNC_VERT_HIGH_ACT)
reg |= LCD_INVERT_FRAME_CLOCK;
else
reg &= ~LCD_INVERT_FRAME_CLOCK;
......@@ -738,9 +738,6 @@ static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
if (ret < 0)
return ret;
/* Configure the AC bias properties. */
lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt);
/* Configure the vertical and horizontal sync properties. */
lcd_cfg_vertical_sync(panel->lower_margin, panel->vsync_len,
panel->upper_margin);
......@@ -748,18 +745,12 @@ static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
panel->left_margin);
/* Configure for disply */
ret = lcd_cfg_display(cfg);
ret = lcd_cfg_display(cfg, panel);
if (ret < 0)
return ret;
if (QVGA != cfg->p_disp_panel->panel_type)
return -EINVAL;
bpp = cfg->bpp;
if (cfg->bpp <= cfg->p_disp_panel->max_bpp &&
cfg->bpp >= cfg->p_disp_panel->min_bpp)
bpp = cfg->bpp;
else
bpp = cfg->p_disp_panel->max_bpp;
if (bpp == 12)
bpp = 16;
ret = lcd_cfg_frame_buffer(par, (unsigned int)panel->xres,
......@@ -1381,7 +1372,7 @@ static int __devinit fb_probe(struct platform_device *device)
da8xx_fb_var.yres_virtual = lcdc_info->yres * LCD_NUM_BUFFERS;
da8xx_fb_var.grayscale =
lcd_cfg->p_disp_panel->panel_shade == MONOCHROME ? 1 : 0;
lcd_cfg->panel_shade == MONOCHROME ? 1 : 0;
da8xx_fb_var.bits_per_pixel = lcd_cfg->bpp;
da8xx_fb_var.hsync_len = lcdc_info->hsync_len;
......
......@@ -12,10 +12,6 @@
#ifndef DA8XX_FB_H
#define DA8XX_FB_H
enum panel_type {
QVGA = 0
};
enum panel_shade {
MONOCHROME = 0,
COLOR_ACTIVE,
......@@ -27,13 +23,6 @@ enum raster_load_mode {
LOAD_PALETTE,
};
struct display_panel {
enum panel_type panel_type; /* QVGA */
int max_bpp;
int min_bpp;
enum panel_shade panel_shade;
};
struct da8xx_lcdc_platform_data {
const char manu_name[10];
void *controller_data;
......@@ -42,7 +31,7 @@ struct da8xx_lcdc_platform_data {
};
struct lcd_ctrl_config {
const struct display_panel *p_disp_panel;
enum panel_shade panel_shade;
/* AC Bias Pin Frequency */
int ac_bias;
......@@ -68,18 +57,9 @@ struct lcd_ctrl_config {
/* Mono 8-bit Mode: 1=D0-D7 or 0=D0-D3 */
unsigned char mono_8bit_mode;
/* Invert line clock */
unsigned char invert_line_clock;
/* Invert frame clock */
unsigned char invert_frm_clock;
/* Horizontal and Vertical Sync Edge: 0=rising 1=falling */
unsigned char sync_edge;
/* Horizontal and Vertical Sync: Control: 0=ignore */
unsigned char sync_ctrl;
/* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */
unsigned char raster_order;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment