ath9k: fix processing RXORN interrupts

The "goto chip_reset" is a bit misleading, because it does not actually
issue a chip reset. Instead it is bypassing processing of other
interrupts and assumes that the tasklet will issue a chip reset.

In the case of RXORN this does not happen, so bypassing processing of
other interrupts will simply allow them to fire again. Even if RXORN
was triggering a reset, it is not critical enough to need the bypass
here.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/main.c

@@ -545,11 +545,10 @@ irqreturn_t ath_isr(int irq, void *dev)
 		sched = true;
 
 	/*
-	 * If a FATAL or RXORN interrupt is received, we have to reset the
-	 * chip immediately.
+	 * If a FATAL interrupt is received, we have to reset the chip
+	 * immediately.
 	 */
-	if ((status & ATH9K_INT_FATAL) || ((status & ATH9K_INT_RXORN) &&
-	    !(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)))
+	if (status & ATH9K_INT_FATAL)
 		goto chip_reset;
 
 	if ((ah->config.hw_hang_checks & HW_BB_WATCHDOG) &&