i2c: qcom-geni: Grow a dev pointer to simplify code

Some lines are long here. Use a struct dev pointer to shorten lines and
simplify code. The clk_get() call can fail because of EPROBE_DEFER
problems too, so just remove the error print message because it isn't
useful. Finally, platform_get_irq() already prints an error so just
remove that error message.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-qcom-geni.c

@@ -502,45 +502,40 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	struct resource *res;
 	u32 proto, tx_depth;
 	int ret;
+	struct device *dev = &pdev->dev;
 
-	gi2c = devm_kzalloc(&pdev->dev, sizeof(*gi2c), GFP_KERNEL);
+	gi2c = devm_kzalloc(dev, sizeof(*gi2c), GFP_KERNEL);
 	if (!gi2c)
 		return -ENOMEM;
 
-	gi2c->se.dev = &pdev->dev;
-	gi2c->se.wrapper = dev_get_drvdata(pdev->dev.parent);
+	gi2c->se.dev = dev;
+	gi2c->se.wrapper = dev_get_drvdata(dev->parent);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	gi2c->se.base = devm_ioremap_resource(&pdev->dev, res);
+	gi2c->se.base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(gi2c->se.base))
 		return PTR_ERR(gi2c->se.base);
 
-	gi2c->se.clk = devm_clk_get(&pdev->dev, "se");
-	if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(&pdev->dev)) {
-		ret = PTR_ERR(gi2c->se.clk);
-		dev_err(&pdev->dev, "Err getting SE Core clk %d\n", ret);
-		return ret;
-	}
+	gi2c->se.clk = devm_clk_get(dev, "se");
+	if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(dev))
+		return PTR_ERR(gi2c->se.clk);
 
-	ret = device_property_read_u32(&pdev->dev, "clock-frequency",
-							&gi2c->clk_freq_out);
+	ret = device_property_read_u32(dev, "clock-frequency",
+				       &gi2c->clk_freq_out);
 	if (ret) {
-		dev_info(&pdev->dev,
-			"Bus frequency not specified, default to 100kHz.\n");
+		dev_info(dev, "Bus frequency not specified, default to 100kHz.\n");
 		gi2c->clk_freq_out = KHZ(100);
 	}
 
-	if (has_acpi_companion(&pdev->dev))
-		ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(&pdev->dev));
+	if (has_acpi_companion(dev))
+		ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(dev));
 
 	gi2c->irq = platform_get_irq(pdev, 0);
-	if (gi2c->irq < 0) {
-		dev_err(&pdev->dev, "IRQ error for i2c-geni\n");
+	if (gi2c->irq < 0)
 		return gi2c->irq;
-	}
 
 	ret = geni_i2c_clk_map_idx(gi2c);
 	if (ret) {
-		dev_err(&pdev->dev, "Invalid clk frequency %d Hz: %d\n",
+		dev_err(dev, "Invalid clk frequency %d Hz: %d\n",
 			gi2c->clk_freq_out, ret);
 		return ret;
 	}
@@ -549,29 +544,29 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	init_completion(&gi2c->done);
 	spin_lock_init(&gi2c->lock);
 	platform_set_drvdata(pdev, gi2c);
-	ret = devm_request_irq(&pdev->dev, gi2c->irq, geni_i2c_irq, 0,
-			       dev_name(&pdev->dev), gi2c);
+	ret = devm_request_irq(dev, gi2c->irq, geni_i2c_irq, 0,
+			       dev_name(dev), gi2c);
 	if (ret) {
-		dev_err(&pdev->dev, "Request_irq failed:%d: err:%d\n",
+		dev_err(dev, "Request_irq failed:%d: err:%d\n",
 			gi2c->irq, ret);
 		return ret;
 	}
 	/* Disable the interrupt so that the system can enter low-power mode */
 	disable_irq(gi2c->irq);
 	i2c_set_adapdata(&gi2c->adap, gi2c);
-	gi2c->adap.dev.parent = &pdev->dev;
-	gi2c->adap.dev.of_node = pdev->dev.of_node;
+	gi2c->adap.dev.parent = dev;
+	gi2c->adap.dev.of_node = dev->of_node;
 	strlcpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
 
 	ret = geni_se_resources_on(&gi2c->se);
 	if (ret) {
-		dev_err(&pdev->dev, "Error turning on resources %d\n", ret);
+		dev_err(dev, "Error turning on resources %d\n", ret);
 		return ret;
 	}
 	proto = geni_se_read_proto(&gi2c->se);
 	tx_depth = geni_se_get_tx_fifo_depth(&gi2c->se);
 	if (proto != GENI_SE_I2C) {
-		dev_err(&pdev->dev, "Invalid proto %d\n", proto);
+		dev_err(dev, "Invalid proto %d\n", proto);
 		geni_se_resources_off(&gi2c->se);
 		return -ENXIO;
 	}
@@ -581,11 +576,11 @@ static int geni_i2c_probe(struct platform_device *pdev)
 							true, true, true);
 	ret = geni_se_resources_off(&gi2c->se);
 	if (ret) {
-		dev_err(&pdev->dev, "Error turning off resources %d\n", ret);
+		dev_err(dev, "Error turning off resources %d\n", ret);
 		return ret;
 	}
 
-	dev_dbg(&pdev->dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
+	dev_dbg(dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
 
 	gi2c->suspended = 1;
 	pm_runtime_set_suspended(gi2c->se.dev);
@@ -595,12 +590,12 @@ static int geni_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_adapter(&gi2c->adap);
 	if (ret) {
-		dev_err(&pdev->dev, "Error adding i2c adapter %d\n", ret);
+		dev_err(dev, "Error adding i2c adapter %d\n", ret);
 		pm_runtime_disable(gi2c->se.dev);
 		return ret;
 	}
 
-	dev_dbg(&pdev->dev, "Geni-I2C adaptor successfully added\n");
+	dev_dbg(dev, "Geni-I2C adaptor successfully added\n");
 
 	return 0;
 }