Commit 3b7f9dbb authored by Lars-Peter Clausen's avatar Lars-Peter Clausen Committed by Jonathan Cameron

iio: xilinx-xadc: Make sure not exceed maximum samplerate

The XADC supports a samplerate of up to 1MSPS. Unfortunately the hardware
does not have a FIFO, which means it generates an interrupt for each
conversion sequence. At one 1MSPS this creates an interrupt storm that
causes the system to soft-lock.

For this reason the driver limits the maximum samplerate to 150kSPS.
Currently this check is only done when setting a new samplerate. But it is
also possible that the initial samplerate configured in the FPGA bitstream
exceeds the limit.

In this case when starting to capture data without first changing the
samplerate the system can overload.

To prevent this check the currently configured samplerate in the probe
function and reduce it to the maximum if necessary.
Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Fixes: bdc8cda1 ("iio:adc: Add Xilinx XADC driver")
Cc: <Stable@vger.kernel.org>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 8bef455c
......@@ -102,6 +102,16 @@ static const unsigned int XADC_ZYNQ_UNMASK_TIMEOUT = 500;
#define XADC_FLAGS_BUFFERED BIT(0)
/*
* The XADC hardware supports a samplerate of up to 1MSPS. Unfortunately it does
* not have a hardware FIFO. Which means an interrupt is generated for each
* conversion sequence. At 1MSPS sample rate the CPU in ZYNQ7000 is completely
* overloaded by the interrupts that it soft-lockups. For this reason the driver
* limits the maximum samplerate 150kSPS. At this rate the CPU is fairly busy,
* but still responsive.
*/
#define XADC_MAX_SAMPLERATE 150000
static void xadc_write_reg(struct xadc *xadc, unsigned int reg,
uint32_t val)
{
......@@ -834,11 +844,27 @@ static const struct iio_buffer_setup_ops xadc_buffer_ops = {
.postdisable = &xadc_postdisable,
};
static int xadc_read_samplerate(struct xadc *xadc)
{
unsigned int div;
uint16_t val16;
int ret;
ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
if (ret)
return ret;
div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
if (div < 2)
div = 2;
return xadc_get_dclk_rate(xadc) / div / 26;
}
static int xadc_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long info)
{
struct xadc *xadc = iio_priv(indio_dev);
unsigned int div;
uint16_t val16;
int ret;
......@@ -891,41 +917,31 @@ static int xadc_read_raw(struct iio_dev *indio_dev,
*val = -((273150 << 12) / 503975);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SAMP_FREQ:
ret = xadc_read_adc_reg(xadc, XADC_REG_CONF2, &val16);
if (ret)
ret = xadc_read_samplerate(xadc);
if (ret < 0)
return ret;
div = (val16 & XADC_CONF2_DIV_MASK) >> XADC_CONF2_DIV_OFFSET;
if (div < 2)
div = 2;
*val = xadc_get_dclk_rate(xadc) / div / 26;
*val = ret;
return IIO_VAL_INT;
default:
return -EINVAL;
}
}
static int xadc_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long info)
static int xadc_write_samplerate(struct xadc *xadc, int val)
{
struct xadc *xadc = iio_priv(indio_dev);
unsigned long clk_rate = xadc_get_dclk_rate(xadc);
unsigned int div;
if (!clk_rate)
return -EINVAL;
if (info != IIO_CHAN_INFO_SAMP_FREQ)
return -EINVAL;
if (val <= 0)
return -EINVAL;
/* Max. 150 kSPS */
if (val > 150000)
val = 150000;
if (val > XADC_MAX_SAMPLERATE)
val = XADC_MAX_SAMPLERATE;
val *= 26;
......@@ -938,7 +954,7 @@ static int xadc_write_raw(struct iio_dev *indio_dev,
* limit.
*/
div = clk_rate / val;
if (clk_rate / div / 26 > 150000)
if (clk_rate / div / 26 > XADC_MAX_SAMPLERATE)
div++;
if (div < 2)
div = 2;
......@@ -949,6 +965,17 @@ static int xadc_write_raw(struct iio_dev *indio_dev,
div << XADC_CONF2_DIV_OFFSET);
}
static int xadc_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long info)
{
struct xadc *xadc = iio_priv(indio_dev);
if (info != IIO_CHAN_INFO_SAMP_FREQ)
return -EINVAL;
return xadc_write_samplerate(xadc, val);
}
static const struct iio_event_spec xadc_temp_events[] = {
{
.type = IIO_EV_TYPE_THRESH,
......@@ -1234,6 +1261,21 @@ static int xadc_probe(struct platform_device *pdev)
if (ret)
goto err_free_samplerate_trigger;
/*
* Make sure not to exceed the maximum samplerate since otherwise the
* resulting interrupt storm will soft-lock the system.
*/
if (xadc->ops->flags & XADC_FLAGS_BUFFERED) {
ret = xadc_read_samplerate(xadc);
if (ret < 0)
goto err_free_samplerate_trigger;
if (ret > XADC_MAX_SAMPLERATE) {
ret = xadc_write_samplerate(xadc, XADC_MAX_SAMPLERATE);
if (ret < 0)
goto err_free_samplerate_trigger;
}
}
ret = request_irq(xadc->irq, xadc->ops->interrupt_handler, 0,
dev_name(&pdev->dev), indio_dev);
if (ret)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment