usb: typec: ucsi: Wait for the USB role switches

When role switch module probe late than ucsi module,
fwnode_usb_role_switch_get() will return -EPROBE_DEFER,
it is better to restart ucsi init work to find
it again every 100ms, total wait time is 10 second.

It also means change ucsi init work to delayed_work.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Link: https://lore.kernel.org/r/1650881886-25530-3-git-send-email-quic_linyyuan@quicinc.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/typec/ucsi/ucsi.c

@@ -1053,6 +1053,14 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
 	con->num = index + 1;
 	con->ucsi = ucsi;
 
+	cap->fwnode = ucsi_find_fwnode(con);
+	con->usb_role_sw = fwnode_usb_role_switch_get(cap->fwnode);
+	if (IS_ERR(con->usb_role_sw)) {
+		dev_err(ucsi->dev, "con%d: failed to get usb role switch\n",
+			con->num);
+		return PTR_ERR(con->usb_role_sw);
+	}
+
 	/* Delay other interactions with the con until registration is complete */
 	mutex_lock(&con->lock);
 
@@ -1088,7 +1096,6 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
 	if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DEBUG_ACCESSORY)
 		*accessory = TYPEC_ACCESSORY_DEBUG;
 
-	cap->fwnode = ucsi_find_fwnode(con);
 	cap->driver_data = con;
 	cap->ops = &ucsi_ops;
 
@@ -1146,13 +1153,6 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
 		ucsi_port_psy_changed(con);
 	}
 
-	con->usb_role_sw = fwnode_usb_role_switch_get(cap->fwnode);
-	if (IS_ERR(con->usb_role_sw)) {
-		dev_err(ucsi->dev, "con%d: failed to get usb role switch\n",
-			con->num);
-		con->usb_role_sw = NULL;
-	}
-
 	/* Only notify USB controller if partner supports USB data */
 	if (!(UCSI_CONSTAT_PARTNER_FLAGS(con->status.flags) & UCSI_CONSTAT_PARTNER_FLAG_USB))
 		u_role = USB_ROLE_NONE;
@@ -1285,12 +1285,20 @@ static int ucsi_init(struct ucsi *ucsi)
 
 static void ucsi_init_work(struct work_struct *work)
 {
-	struct ucsi *ucsi = container_of(work, struct ucsi, work);
+	struct ucsi *ucsi = container_of(work, struct ucsi, work.work);
 	int ret;
 
 	ret = ucsi_init(ucsi);
 	if (ret)
 		dev_err(ucsi->dev, "PPM init failed (%d)\n", ret);
+
+	if (ret == -EPROBE_DEFER) {
+		if (ucsi->work_count++ > UCSI_ROLE_SWITCH_WAIT_COUNT)
+			return;
+
+		queue_delayed_work(system_long_wq, &ucsi->work,
+				   UCSI_ROLE_SWITCH_INTERVAL);
+	}
 }
 
 /**
@@ -1330,7 +1338,7 @@ struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops)
 	if (!ucsi)
 		return ERR_PTR(-ENOMEM);
 
-	INIT_WORK(&ucsi->work, ucsi_init_work);
+	INIT_DELAYED_WORK(&ucsi->work, ucsi_init_work);
 	mutex_init(&ucsi->ppm_lock);
 	ucsi->dev = dev;
 	ucsi->ops = ops;
@@ -1365,7 +1373,7 @@ int ucsi_register(struct ucsi *ucsi)
 	if (!ucsi->version)
 		return -ENODEV;
 
-	queue_work(system_long_wq, &ucsi->work);
+	queue_delayed_work(system_long_wq, &ucsi->work, 0);
 
 	return 0;
 }
@@ -1382,7 +1390,7 @@ void ucsi_unregister(struct ucsi *ucsi)
 	u64 cmd = UCSI_SET_NOTIFICATION_ENABLE;
 
 	/* Make sure that we are not in the middle of driver initialization */
-	cancel_work_sync(&ucsi->work);
+	cancel_delayed_work_sync(&ucsi->work);
 
 	/* Disable notifications */
 	ucsi->ops->async_write(ucsi, UCSI_CONTROL, &cmd, sizeof(cmd));

drivers/usb/typec/ucsi/ucsi.h

@@ -287,7 +287,11 @@ struct ucsi {
 	struct ucsi_capability cap;
 	struct ucsi_connector *connector;
 
-	struct work_struct work;
+	struct delayed_work work;
+	int work_count;
+#define UCSI_ROLE_SWITCH_RETRY_PER_HZ	10
+#define UCSI_ROLE_SWITCH_INTERVAL	(HZ / UCSI_ROLE_SWITCH_RETRY_PER_HZ)
+#define UCSI_ROLE_SWITCH_WAIT_COUNT	(10 * UCSI_ROLE_SWITCH_RETRY_PER_HZ)
 
 	/* PPM Communication lock */
 	struct mutex ppm_lock;