scsi: docs: convert g_NCR5380.txt to ReST

Link: https://lore.kernel.org/r/a66e9ea704be6a7aa81b9864ad66a32b75ab808d.1583136624.git.mchehab+huawei@kernel.orgAcked-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Documentation/scsi/g_NCR5380.txt → Documentation/scsi/g_NCR5380.rst

-README file for the Linux g_NCR5380 driver.
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
 
-(c) 1993 Drew Eckhard
-NCR53c400 extensions (c) 1994,1995,1996 Kevin Lentin
+==========================================
+README file for the Linux g_NCR5380 driver
+==========================================
+
+Copyright |copy| 1993 Drew Eckhard
+
+NCR53c400 extensions Copyright |copy| 1994,1995,1996 Kevin Lentin
 
 This file documents the NCR53c400 extensions by Kevin Lentin and some
 enhancements to the NCR5380 core.
@@ -26,43 +32,62 @@ time. More info to come in the future.
 This driver works as a module.
 When included as a module, parameters can be passed on the insmod/modprobe
 command line:
+
+  ============= ===============================================================
   irq=xx[,...]	the interrupt(s)
   base=xx[,...]	the port or base address(es) (for port or memory mapped, resp.)
   card=xx[,...]	card type(s):
-		0 = NCR5380,
-		1 = NCR53C400,
-		2 = NCR53C400A,
-		3 = Domex Technology Corp 3181E (DTC3181E)
-		4 = Hewlett Packard C2502
+
+		==  ======================================
+		0   NCR5380,
+		1   NCR53C400,
+		2   NCR53C400A,
+		3   Domex Technology Corp 3181E (DTC3181E)
+		4   Hewlett Packard C2502
+		==  ======================================
+  ============= ===============================================================
 
 These old-style parameters can support only one card:
-  ncr_irq=xx   the interrupt
-  ncr_addr=xx  the port or base address (for port or memory
-               mapped, resp.)
-  ncr_5380=1   to set up for a NCR5380 board
-  ncr_53c400=1 to set up for a NCR53C400 board
+
+  ============= =================================================
+  ncr_irq=xx    the interrupt
+  ncr_addr=xx   the port or base address (for port or memory
+                mapped, resp.)
+  ncr_5380=1    to set up for a NCR5380 board
+  ncr_53c400=1  to set up for a NCR53C400 board
   ncr_53c400a=1 to set up for a NCR53C400A board
-  dtc_3181e=1  to set up for a Domex Technology Corp 3181E board
-  hp_c2502=1   to set up for a Hewlett Packard C2502 board
+  dtc_3181e=1   to set up for a Domex Technology Corp 3181E board
+  hp_c2502=1    to set up for a Hewlett Packard C2502 board
+  ============= =================================================
+
+E.g. Trantor T130B in its default configuration::
+
+	modprobe g_NCR5380 irq=5 base=0x350 card=1
+
+or alternatively, using the old syntax::
 
-E.g. Trantor T130B in its default configuration:
-modprobe g_NCR5380 irq=5 base=0x350 card=1
-or alternatively, using the old syntax,
-modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_53c400=1
+	modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_53c400=1
 
-E.g. a port mapped NCR5380 board, driver to probe for IRQ:
-modprobe g_NCR5380 base=0x350 card=0
-or alternatively,
-modprobe g_NCR5380 ncr_addr=0x350 ncr_5380=1
+E.g. a port mapped NCR5380 board, driver to probe for IRQ::
 
-E.g. a memory mapped NCR53C400 board with no IRQ:
-modprobe g_NCR5380 irq=255 base=0xc8000 card=1
-or alternatively,
-modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
+	modprobe g_NCR5380 base=0x350 card=0
+
+or alternatively::
+
+	modprobe g_NCR5380 ncr_addr=0x350 ncr_5380=1
+
+E.g. a memory mapped NCR53C400 board with no IRQ::
+
+	modprobe g_NCR5380 irq=255 base=0xc8000 card=1
+
+or alternatively::
+
+	modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
 
 E.g. two cards, DTC3181 (in non-PnP mode) at 0x240 with no IRQ
-and HP C2502 at 0x300 with IRQ 7:
-modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
+and HP C2502 at 0x300 with IRQ 7::
+
+	modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
 
 Kevin Lentin
 K.Lentin@cs.monash.edu.au

Documentation/scsi/index.rst

@@ -20,5 +20,6 @@ Linux SCSI Subsystem
    dc395x
    dpti
    FlashPoint
+   g_NCR5380
 
    scsi_transport_srp/figures

Documentation/scsi/scsi-parameters.txt

@@ -57,13 +57,13 @@ parameters may be changed at runtime by the command
 			See header of drivers/scsi/NCR_D700.c.
 
 	ncr5380=	[HW,SCSI]
-			See Documentation/scsi/g_NCR5380.txt.
+			See Documentation/scsi/g_NCR5380.rst.
 
 	ncr53c400=	[HW,SCSI]
-			See Documentation/scsi/g_NCR5380.txt.
+			See Documentation/scsi/g_NCR5380.rst.
 
 	ncr53c400a=	[HW,SCSI]
-			See Documentation/scsi/g_NCR5380.txt.
+			See Documentation/scsi/g_NCR5380.rst.
 
 	ncr53c8xx=	[HW,SCSI]
 

MAINTAINERS

@@ -11473,7 +11473,7 @@ M:	Finn Thain <fthain@telegraphics.com.au>
 M:	Michael Schmitz <schmitzmic@gmail.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
-F:	Documentation/scsi/g_NCR5380.txt
+F:	Documentation/scsi/g_NCR5380.rst
 F:	drivers/scsi/NCR5380.*
 F:	drivers/scsi/arm/cumana_1.c
 F:	drivers/scsi/arm/oak.c

drivers/scsi/g_NCR5380.c

@@ -20,7 +20,7 @@
  * Added ISAPNP support for DTC436 adapters,
  * Thomas Sailer, sailer@ife.ee.ethz.ch
  *
- * See Documentation/scsi/g_NCR5380.txt for more info.
+ * See Documentation/scsi/g_NCR5380.rst for more info.
  */
 
 #include <asm/io.h>