Skip to content

L
linux
Commit 3c3f5d2c authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz
Browse files
Options

cs5530/sc1200: add ->speedproc support 

* add {cs5530,sc1200}_tunepio() for programming PIO timings

* add {cs5530,sc1200}_tune_chipset() (->speedproc method) for setting
  transfer mode and convert {cs5530,sc1200}_config_dma() to use it

* bump driver version
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent a01ba401
Hide whitespace changes
Inline Side-by-side
Showing with 81 additions and 46 deletions
drivers/ide/pci/cs5530.c
View file @ 3c3f5d2c
/*
* linux/drivers/ide/pci/cs5530.c Version 0.72 Mar 10 2007
* linux/drivers/ide/pci/cs5530.c Version 0.73 Mar 10 2007
*
* Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2000 Mark Lord <mlord@pobox.com>
......@@ -62,6 +62,14 @@ static unsigned int cs5530_pio_timings[2][5] = {
#define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132)
#define CS5530_BASEREG(hwif) (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20))
static void cs5530_tunepio(ide_drive_t *drive, u8 pio)
{
unsigned long basereg = CS5530_BASEREG(drive->hwif);
unsigned int format = (inl(basereg + 4) >> 31) & 1;
outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3));
}
/**
* cs5530_tuneproc - select/set PIO modes
*
......@@ -74,17 +82,10 @@ static unsigned int cs5530_pio_timings[2][5] = {
static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autotune" */
{
ide_hwif_t *hwif = HWIF(drive);
unsigned int format;
unsigned long basereg = CS5530_BASEREG(hwif);
static u8 modes[5] = { XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3, XFER_PIO_4};
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
if (!cs5530_set_xfer_mode(drive, modes[pio])) {
format = (inl(basereg + 4) >> 31) & 1;
outl(cs5530_pio_timings[format][pio],
basereg+(drive->select.b.unit<<3));
}
if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
cs5530_tunepio(drive, pio);
}
/**
......@@ -136,18 +137,27 @@ static u8 cs5530_udma_filter(ide_drive_t *drive)
static int cs5530_config_dma(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
unsigned int reg, timings = 0;
if (ide_use_dma(drive)) {
u8 mode = ide_max_dma_mode(drive);
if (mode && drive->hwif->speedproc(drive, mode) == 0)
return 0;
}
return 1;
}
static int cs5530_tune_chipset(ide_drive_t *drive, u8 mode)
{
unsigned long basereg;
u8 unit = drive->dn & 1, mode = 0;
unsigned int reg, timings = 0;
if (ide_use_dma(drive))
mode = ide_max_dma_mode(drive);
mode = ide_rate_filter(drive, mode);
/*
* Tell the drive to switch to the new mode; abort on failure.
*/
if (!mode || cs5530_set_xfer_mode(drive, mode))
if (cs5530_set_xfer_mode(drive, mode))
return 1; /* failure */
/*
......@@ -160,14 +170,21 @@ static int cs5530_config_dma(ide_drive_t *drive)
case XFER_MW_DMA_0: timings = 0x00077771; break;
case XFER_MW_DMA_1: timings = 0x00012121; break;
case XFER_MW_DMA_2: timings = 0x00002020; break;
case XFER_PIO_4:
case XFER_PIO_3:
case XFER_PIO_2:
case XFER_PIO_1:
case XFER_PIO_0:
cs5530_tunepio(drive, mode - XFER_PIO_0);
return 0;
default:
BUG();
break;
}
basereg = CS5530_BASEREG(hwif);
basereg = CS5530_BASEREG(drive->hwif);
reg = inl(basereg + 4); /* get drive0 config register */
timings |= reg & 0x80000000; /* preserve PIO format bit */
if (unit == 0) { /* are we configuring drive0? */
if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */
outl(timings, basereg + 4); /* write drive0 config register */
} else {
if (timings & 0x00100000)
......@@ -293,6 +310,8 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
hwif->serialized = hwif->mate->serialized = 1;
hwif->tuneproc = &cs5530_tuneproc;
hwif->speedproc = &cs5530_tune_chipset;
basereg = CS5530_BASEREG(hwif);
d0_timings = inl(basereg + 0);
if (CS5530_BAD_PIO(d0_timings)) {
......
drivers/ide/pci/sc1200.c
View file @ 3c3f5d2c
/*
* linux/drivers/ide/pci/sc1200.c Version 0.93 Mar 10 2007
* linux/drivers/ide/pci/sc1200.c Version 0.94 Mar 10 2007
*
* Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
......@@ -95,6 +95,20 @@ static const unsigned int sc1200_pio_timings[4][5] =
*/
//#define SC1200_BAD_PIO(timings) (((timings)&~0x80000000)==0x00009172)
static void sc1200_tunepio(ide_drive_t *drive, u8 pio)
{
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *pdev = hwif->pci_dev;
unsigned int basereg = hwif->channel ? 0x50 : 0x40, format = 0;
pci_read_config_dword(pdev, basereg + 4, &format);
format = (format >> 31) & 1;
if (format)
format += sc1200_get_pci_clock();
pci_write_config_dword(pdev, basereg + ((drive->dn & 1) << 3),
sc1200_pio_timings[format][pio]);
}
/*
* The SC1200 specifies that two drives sharing a cable cannot mix
* UDMA/MDMA. It has to be one or the other, for the pair, though
......@@ -124,11 +138,7 @@ static u8 sc1200_udma_filter(ide_drive_t *drive)
return mask;
}
/*
* sc1200_config_dma2() handles selection/setting of DMA/UDMA modes
* for both the chipset and drive.
*/
static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
static int sc1200_tune_chipset(ide_drive_t *drive, u8 mode)
{
ide_hwif_t *hwif = HWIF(drive);
int unit = drive->select.b.unit;
......@@ -136,14 +146,26 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
unsigned short pci_clock;
unsigned int basereg = hwif->channel ? 0x50 : 0x40;
mode = ide_rate_filter(drive, mode);
/*
* Tell the drive to switch to the new mode; abort on failure.
*/
if (!mode || sc1200_set_xfer_mode(drive, mode)) {
if (sc1200_set_xfer_mode(drive, mode)) {
printk("SC1200: set xfer mode failure\n");
return 1; /* failure */
}
switch (mode) {
case XFER_PIO_4:
case XFER_PIO_3:
case XFER_PIO_2:
case XFER_PIO_1:
case XFER_PIO_0:
sc1200_tunepio(drive, mode - XFER_PIO_0);
return 0;
}
pci_clock = sc1200_get_pci_clock();
/*
......@@ -196,11 +218,9 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
case PCI_CLK_66: timings = 0x00015151; break;
}
break;
}
if (timings == 0) {
printk("%s: sc1200_config_dma: huh? mode=%02x clk=%x \n", drive->name, mode, pci_clock);
return 1; /* failure */
default:
BUG();
break;
}
if (unit == 0) { /* are we configuring drive0? */
......@@ -220,12 +240,14 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
*/
static int sc1200_config_dma (ide_drive_t *drive)
{
u8 mode = 0;
if (ide_use_dma(drive)) {
u8 mode = ide_max_dma_mode(drive);
if (ide_use_dma(drive))
mode = ide_max_dma_mode(drive);
if (mode && drive->hwif->speedproc(drive, mode) == 0)
return 0;
}
return sc1200_config_dma2(drive, mode);
return 1;
}
......@@ -265,8 +287,6 @@ static int sc1200_ide_dma_end (ide_drive_t *drive)
static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "autotune" */
{
ide_hwif_t *hwif = HWIF(drive);
unsigned int format;
static byte modes[5] = {XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3, XFER_PIO_4};
int mode = -1;
/*
......@@ -283,21 +303,16 @@ static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "au
if (mode != -1) {
printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
hwif->dma_off_quietly(drive);
if (sc1200_config_dma2(drive, mode) == 0)
if (sc1200_tune_chipset(drive, mode) == 0)
hwif->dma_host_on(drive);
return;
}
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
printk("SC1200: %s: setting PIO mode%d\n", drive->name, pio);
if (!sc1200_set_xfer_mode(drive, modes[pio])) {
unsigned int basereg = hwif->channel ? 0x50 : 0x40;
pci_read_config_dword (hwif->pci_dev, basereg+4, &format);
format = (format >> 31) & 1;
if (format)
format += sc1200_get_pci_clock();
pci_write_config_dword(hwif->pci_dev, basereg + (drive->select.b.unit << 3), sc1200_pio_timings[format][pio]);
}
if (sc1200_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
sc1200_tunepio(drive, pio);
}
#ifdef CONFIG_PM
......@@ -447,6 +462,7 @@ static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif)
if (!noautodma)
hwif->autodma = 1;
hwif->tuneproc = &sc1200_tuneproc;
hwif->speedproc = &sc1200_tune_chipset;
}
hwif->atapi_dma = 1;
hwif->ultra_mask = 0x07;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7