Commit 3cb5b0ee authored by Linus Walleij's avatar Linus Walleij Committed by Jakub Kicinski

net: ehernet: ixp4xx: Use netdev_* messages

Simplify and correct a bunch of messages using printk
directly to use the netdev_* macros. I have not changed
all of them, just the low-hanging fruit.
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent d813d7e5
......@@ -572,8 +572,8 @@ static void ixp4xx_adjust_link(struct net_device *dev)
__raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
&port->regs->tx_control[0]);
printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n",
dev->name, port->speed, port->duplex ? "full" : "half");
netdev_info(dev, "%s: link up, speed %u Mb/s, %s duplex\n",
dev->name, port->speed, port->duplex ? "full" : "half");
}
......@@ -583,7 +583,7 @@ static inline void debug_pkt(struct net_device *dev, const char *func,
#if DEBUG_PKT_BYTES
int i;
printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len);
netdev_debug(dev, "%s(%i) ", func, len);
for (i = 0; i < len; i++) {
if (i >= DEBUG_PKT_BYTES)
break;
......@@ -674,7 +674,7 @@ static int eth_poll(struct napi_struct *napi, int budget)
int received = 0;
#if DEBUG_RX
printk(KERN_DEBUG "%s: eth_poll\n", dev->name);
netdev_debug(dev, "eth_poll\n");
#endif
while (received < budget) {
......@@ -688,23 +688,20 @@ static int eth_poll(struct napi_struct *napi, int budget)
if ((n = queue_get_desc(rxq, port, 0)) < 0) {
#if DEBUG_RX
printk(KERN_DEBUG "%s: eth_poll napi_complete\n",
dev->name);
netdev_debug(dev, "eth_poll napi_complete\n");
#endif
napi_complete(napi);
qmgr_enable_irq(rxq);
if (!qmgr_stat_below_low_watermark(rxq) &&
napi_reschedule(napi)) { /* not empty again */
#if DEBUG_RX
printk(KERN_DEBUG "%s: eth_poll napi_reschedule succeeded\n",
dev->name);
netdev_debug(dev, "eth_poll napi_reschedule succeeded\n");
#endif
qmgr_disable_irq(rxq);
continue;
}
#if DEBUG_RX
printk(KERN_DEBUG "%s: eth_poll all done\n",
dev->name);
netdev_debug(dev, "eth_poll all done\n");
#endif
return received; /* all work done */
}
......@@ -769,7 +766,7 @@ static int eth_poll(struct napi_struct *napi, int budget)
}
#if DEBUG_RX
printk(KERN_DEBUG "eth_poll(): end, not all work done\n");
netdev_debug(dev, "eth_poll(): end, not all work done\n");
#endif
return received; /* not all work done */
}
......@@ -833,7 +830,7 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
struct desc *desc;
#if DEBUG_TX
printk(KERN_DEBUG "%s: eth_xmit\n", dev->name);
netdev_debug(dev, "eth_xmit\n");
#endif
if (unlikely(skb->len > MAX_MRU)) {
......@@ -888,22 +885,21 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
#if DEBUG_TX
printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
netdev_debug(dev, "eth_xmit queue full\n");
#endif
netif_stop_queue(dev);
/* we could miss TX ready interrupt */
/* really empty in fact */
if (!qmgr_stat_below_low_watermark(txreadyq)) {
#if DEBUG_TX
printk(KERN_DEBUG "%s: eth_xmit ready again\n",
dev->name);
netdev_debug(dev, "eth_xmit ready again\n");
#endif
netif_wake_queue(dev);
}
}
#if DEBUG_TX
printk(KERN_DEBUG "%s: eth_xmit end\n", dev->name);
netdev_debug(dev, "eth_xmit end\n");
#endif
ixp_tx_timestamp(port, skb);
......@@ -1177,8 +1173,7 @@ static int eth_open(struct net_device *dev)
return err;
if (npe_recv_message(npe, &msg, "ETH_GET_STATUS")) {
printk(KERN_ERR "%s: %s not responding\n", dev->name,
npe_name(npe));
netdev_err(dev, "%s not responding\n", npe_name(npe));
return -EIO;
}
port->firmware[0] = msg.byte4;
......@@ -1290,7 +1285,7 @@ static int eth_close(struct net_device *dev)
msg.eth_id = port->id;
msg.byte3 = 1;
if (npe_send_recv_message(port->npe, &msg, "ETH_ENABLE_LOOPBACK"))
printk(KERN_CRIT "%s: unable to enable loopback\n", dev->name);
netdev_crit(dev, "unable to enable loopback\n");
i = 0;
do { /* drain RX buffers */
......@@ -1314,11 +1309,11 @@ static int eth_close(struct net_device *dev)
} while (++i < MAX_CLOSE_WAIT);
if (buffs)
printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
" left in NPE\n", dev->name, buffs);
netdev_crit(dev, "unable to drain RX queue, %i buffer(s)"
" left in NPE\n", buffs);
#if DEBUG_CLOSE
if (!buffs)
printk(KERN_DEBUG "Draining RX queue took %i cycles\n", i);
netdev_debug(dev, "draining RX queue took %i cycles\n", i);
#endif
buffs = TX_DESCS;
......@@ -1334,17 +1329,16 @@ static int eth_close(struct net_device *dev)
} while (++i < MAX_CLOSE_WAIT);
if (buffs)
printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
"left in NPE\n", dev->name, buffs);
netdev_crit(dev, "unable to drain TX queue, %i buffer(s) "
"left in NPE\n", buffs);
#if DEBUG_CLOSE
if (!buffs)
printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
netdev_debug(dev, "draining TX queues took %i cycles\n", i);
#endif
msg.byte3 = 0;
if (npe_send_recv_message(port->npe, &msg, "ETH_DISABLE_LOOPBACK"))
printk(KERN_CRIT "%s: unable to disable loopback\n",
dev->name);
netdev_crit(dev, "unable to disable loopback\n");
phy_stop(dev->phydev);
......@@ -1476,8 +1470,8 @@ static int ixp4xx_eth_probe(struct platform_device *pdev)
if ((err = register_netdev(ndev)))
goto err_phy_dis;
printk(KERN_INFO "%s: MII PHY %i on %s\n", ndev->name, plat->phy,
npe_name(port->npe));
netdev_info(ndev, "%s: MII PHY %i on %s\n", ndev->name, plat->phy,
npe_name(port->npe));
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment