Merge branch 'pci/huang-d3cold-fixes' into for-linus

* pci/huang-d3cold-fixes:
  PCI/PM: Fix proc config reg access for D3cold and bridge suspending
  PCI/PM: Resume device before shutdown
  PCI/PM: Fix deadlock when unbinding device if parent in D3cold

drivers/pci/bus.c

@@ -320,10 +320,7 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
 		} else
 			next = dev->bus_list.next;
 
-		/* Run device routines with the device locked */
-		device_lock(&dev->dev);
 		retval = cb(dev, userdata);
-		device_unlock(&dev->dev);
 		if (retval)
 			break;
 	}

drivers/pci/pci-driver.c

@@ -398,6 +398,8 @@ static void pci_device_shutdown(struct device *dev)
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	struct pci_driver *drv = pci_dev->driver;
 
+	pm_runtime_resume(dev);
+
 	if (drv && drv->shutdown)
 		drv->shutdown(pci_dev);
 	pci_msi_shutdown(pci_dev);
@@ -408,16 +410,6 @@ static void pci_device_shutdown(struct device *dev)
 	 * continue to do DMA
 	 */
 	pci_disable_device(pci_dev);
-
-	/*
-	 * Devices may be enabled to wake up by runtime PM, but they need not
-	 * be supposed to wake up the system from its "power off" state (e.g.
-	 * ACPI S5).  Therefore disable wakeup for all devices that aren't
-	 * supposed to wake up the system at this point.  The state argument
-	 * will be ignored by pci_enable_wake().
-	 */
-	if (!device_may_wakeup(dev))
-		pci_enable_wake(pci_dev, PCI_UNKNOWN, false);
 }
 
 #ifdef CONFIG_PM

drivers/pci/pci-sysfs.c

@@ -458,40 +458,6 @@ boot_vga_show(struct device *dev, struct device_attribute *attr, char *buf)
 }
 struct device_attribute vga_attr = __ATTR_RO(boot_vga);
 
-static void
-pci_config_pm_runtime_get(struct pci_dev *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct device *parent = dev->parent;
-
-	if (parent)
-		pm_runtime_get_sync(parent);
-	pm_runtime_get_noresume(dev);
-	/*
-	 * pdev->current_state is set to PCI_D3cold during suspending,
-	 * so wait until suspending completes
-	 */
-	pm_runtime_barrier(dev);
-	/*
-	 * Only need to resume devices in D3cold, because config
-	 * registers are still accessible for devices suspended but
-	 * not in D3cold.
-	 */
-	if (pdev->current_state == PCI_D3cold)
-		pm_runtime_resume(dev);
-}
-
-static void
-pci_config_pm_runtime_put(struct pci_dev *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct device *parent = dev->parent;
-
-	pm_runtime_put(dev);
-	if (parent)
-		pm_runtime_put_sync(parent);
-}
-
 static ssize_t
 pci_read_config(struct file *filp, struct kobject *kobj,
 		struct bin_attribute *bin_attr,

drivers/pci/pci.c

@@ -1858,6 +1858,38 @@ bool pci_dev_run_wake(struct pci_dev *dev)
 }
 EXPORT_SYMBOL_GPL(pci_dev_run_wake);
 
+void pci_config_pm_runtime_get(struct pci_dev *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device *parent = dev->parent;
+
+	if (parent)
+		pm_runtime_get_sync(parent);
+	pm_runtime_get_noresume(dev);
+	/*
+	 * pdev->current_state is set to PCI_D3cold during suspending,
+	 * so wait until suspending completes
+	 */
+	pm_runtime_barrier(dev);
+	/*
+	 * Only need to resume devices in D3cold, because config
+	 * registers are still accessible for devices suspended but
+	 * not in D3cold.
+	 */
+	if (pdev->current_state == PCI_D3cold)
+		pm_runtime_resume(dev);
+}
+
+void pci_config_pm_runtime_put(struct pci_dev *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device *parent = dev->parent;
+
+	pm_runtime_put(dev);
+	if (parent)
+		pm_runtime_put_sync(parent);
+}
+
 /**
  * pci_pm_init - Initialize PM functions of given PCI device
  * @dev: PCI device to handle.

drivers/pci/pci.h

@@ -72,6 +72,8 @@ extern void pci_disable_enabled_device(struct pci_dev *dev);
 extern int pci_finish_runtime_suspend(struct pci_dev *dev);
 extern int __pci_pme_wakeup(struct pci_dev *dev, void *ign);
 extern void pci_wakeup_bus(struct pci_bus *bus);
+extern void pci_config_pm_runtime_get(struct pci_dev *dev);
+extern void pci_config_pm_runtime_put(struct pci_dev *dev);
 extern void pci_pm_init(struct pci_dev *dev);
 extern void platform_pci_wakeup_init(struct pci_dev *dev);
 extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);

drivers/pci/pcie/aer/aerdrv_core.c

@@ -213,6 +213,7 @@ static int report_error_detected(struct pci_dev *dev, void *data)
 	struct aer_broadcast_data *result_data;
 	result_data = (struct aer_broadcast_data *) data;
 
+	device_lock(&dev->dev);
 	dev->error_state = result_data->state;
 
 	if (!dev->driver ||
@@ -231,12 +232,14 @@ static int report_error_detected(struct pci_dev *dev, void *data)
 				   dev->driver ?
 				   "no AER-aware driver" : "no driver");
 		}
-		return 0;
+		goto out;
 	}
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->error_detected(dev, result_data->state);
 	result_data->result = merge_result(result_data->result, vote);
+out:
+	device_unlock(&dev->dev);
 	return 0;
 }
 
@@ -247,14 +250,17 @@ static int report_mmio_enabled(struct pci_dev *dev, void *data)
 	struct aer_broadcast_data *result_data;
 	result_data = (struct aer_broadcast_data *) data;
 
+	device_lock(&dev->dev);
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->mmio_enabled)
-		return 0;
+		goto out;
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->mmio_enabled(dev);
 	result_data->result = merge_result(result_data->result, vote);
+out:
+	device_unlock(&dev->dev);
 	return 0;
 }
 
@@ -265,14 +271,17 @@ static int report_slot_reset(struct pci_dev *dev, void *data)
 	struct aer_broadcast_data *result_data;
 	result_data = (struct aer_broadcast_data *) data;
 
+	device_lock(&dev->dev);
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->slot_reset)
-		return 0;
+		goto out;
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->slot_reset(dev);
 	result_data->result = merge_result(result_data->result, vote);
+out:
+	device_unlock(&dev->dev);
 	return 0;
 }
 
@@ -280,15 +289,18 @@ static int report_resume(struct pci_dev *dev, void *data)
 {
 	const struct pci_error_handlers *err_handler;
 
+	device_lock(&dev->dev);
 	dev->error_state = pci_channel_io_normal;
 
 	if (!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->resume)
-		return 0;
+		goto out;
 
 	err_handler = dev->driver->err_handler;
 	err_handler->resume(dev);
+out:
+	device_unlock(&dev->dev);
 	return 0;
 }
 

drivers/pci/proc.c

@@ -76,6 +76,8 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp
 	if (!access_ok(VERIFY_WRITE, buf, cnt))
 		return -EINVAL;
 
+	pci_config_pm_runtime_get(dev);
+
 	if ((pos & 1) && cnt) {
 		unsigned char val;
 		pci_user_read_config_byte(dev, pos, &val);
@@ -121,6 +123,8 @@ proc_bus_pci_read(struct file *file, char __user *buf, size_t nbytes, loff_t *pp
 		cnt--;
 	}
 
+	pci_config_pm_runtime_put(dev);
+
 	*ppos = pos;
 	return nbytes;
 }
@@ -146,6 +150,8 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof
 	if (!access_ok(VERIFY_READ, buf, cnt))
 		return -EINVAL;
 
+	pci_config_pm_runtime_get(dev);
+
 	if ((pos & 1) && cnt) {
 		unsigned char val;
 		__get_user(val, buf);
@@ -191,6 +197,8 @@ proc_bus_pci_write(struct file *file, const char __user *buf, size_t nbytes, lof
 		cnt--;
 	}
 
+	pci_config_pm_runtime_put(dev);
+
 	*ppos = pos;
 	i_size_write(ino, dp->size);
 	return nbytes;