Commit 3d2528d6 authored by Binbin Zhou's avatar Binbin Zhou Committed by Mark Brown

ASoC: loongson: Simplify with dev_err_probe()

Error handling in probe() can be a bit simpler with dev_err_probe().
Signed-off-by: default avatarBinbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/07855aa6c290ec826d63e68b898e7f4afac5e30d.1725844530.git.zhoubinbin@loongson.cnSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent ce3997ab
......@@ -176,22 +176,17 @@ static int loongson_asoc_card_probe(struct platform_device *pdev)
snd_soc_card_set_drvdata(card, ls_priv);
ret = device_property_read_string(dev, "model", &card->name);
if (ret) {
dev_err(dev, "Error parsing card name: %d\n", ret);
return ret;
}
if (ret)
dev_err_probe(dev, ret, "Error parsing card name\n");
ret = device_property_read_u32(dev, "mclk-fs", &ls_priv->mclk_fs);
if (ret) {
dev_err(dev, "Error parsing mclk-fs: %d\n", ret);
return ret;
}
if (ret)
dev_err_probe(dev, ret, "Error parsing mclk-fs\n");
if (has_acpi_companion(dev))
ret = loongson_card_parse_acpi(ls_priv);
else
ret = loongson_card_parse_of(ls_priv);
if (ret < 0)
return ret;
ret = has_acpi_companion(dev) ? loongson_card_parse_acpi(ls_priv)
: loongson_card_parse_of(ls_priv);
if (ret)
dev_err_probe(dev, ret, "Error parsing acpi/of properties\n");
return devm_snd_soc_register_card(dev, card);
}
......
......@@ -97,13 +97,12 @@ static int loongson_i2s_pci_probe(struct pci_dev *pdev,
dev_err(dev, "iomap_regions failed\n");
return ret;
}
i2s->reg_base = pcim_iomap_table(pdev)[0];
i2s->regmap = devm_regmap_init_mmio(dev, i2s->reg_base,
&loongson_i2s_regmap_config);
if (IS_ERR(i2s->regmap)) {
dev_err(dev, "regmap_init_mmio failed\n");
return PTR_ERR(i2s->regmap);
}
if (IS_ERR(i2s->regmap))
dev_err_probe(dev, PTR_ERR(i2s->regmap), "regmap_init_mmio failed\n");
tx_data = &i2s->tx_dma_data;
rx_data = &i2s->rx_dma_data;
......@@ -115,22 +114,16 @@ static int loongson_i2s_pci_probe(struct pci_dev *pdev,
rx_data->order_addr = i2s->reg_base + LS_I2S_RX_ORDER;
tx_data->irq = fwnode_irq_get_byname(fwnode, "tx");
if (tx_data->irq < 0) {
dev_err(dev, "dma tx irq invalid\n");
return tx_data->irq;
}
if (tx_data->irq < 0)
dev_err_probe(dev, tx_data->irq, "dma tx irq invalid\n");
rx_data->irq = fwnode_irq_get_byname(fwnode, "rx");
if (rx_data->irq < 0) {
dev_err(dev, "dma rx irq invalid\n");
return rx_data->irq;
}
if (rx_data->irq < 0)
dev_err_probe(dev, rx_data->irq, "dma rx irq invalid\n");
device_property_read_u32(dev, "clock-frequency", &i2s->clk_rate);
if (!i2s->clk_rate) {
dev_err(dev, "clock-frequency property invalid\n");
return -EINVAL;
}
ret = device_property_read_u32(dev, "clock-frequency", &i2s->clk_rate);
if (ret)
dev_err_probe(dev, ret, "clock-frequency property invalid\n");
dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
......@@ -141,10 +134,8 @@ static int loongson_i2s_pci_probe(struct pci_dev *pdev,
ret = devm_snd_soc_register_component(dev, &loongson_i2s_component,
&loongson_i2s_dai, 1);
if (ret) {
dev_err(dev, "register DAI failed %d\n", ret);
return ret;
}
if (ret)
dev_err_probe(dev, ret, "register DAI failed\n");
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment