Commit 3d896d34 authored by Roy Spliet's avatar Roy Spliet Committed by Ben Skeggs

drm/nva3/clk: Parse clock control registers more accurately

Signed-off-by: default avatarRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: default avatarBen Skeggs <bskeggs@redhat.com>
parent 17eac85a
......@@ -20,6 +20,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*
* Authors: Ben Skeggs
* Roy Spliet
*/
#include <subdev/bios.h>
......@@ -42,9 +43,17 @@ static u32
read_vco(struct nva3_clock_priv *priv, int clk)
{
u32 sctl = nv_rd32(priv, 0x4120 + (clk * 4));
if ((sctl & 0x00000030) != 0x00000030)
switch (sctl & 0x00000030) {
case 0x00000000:
return nv_device(priv)->crystal;
case 0x00000020:
return read_pll(priv, 0x41, 0x00e820);
return read_pll(priv, 0x42, 0x00e8a0);
case 0x00000030:
return read_pll(priv, 0x42, 0x00e8a0);
default:
return 0;
}
}
static u32
......@@ -66,14 +75,25 @@ read_clk(struct nva3_clock_priv *priv, int clk, bool ignore_en)
if (!ignore_en && !(sctl & 0x00000100))
return 0;
/* out_alt */
if (sctl & 0x00000400)
return 108000;
/* vco_out */
switch (sctl & 0x00003000) {
case 0x00000000:
return nv_device(priv)->crystal;
if (!(sctl & 0x00000200))
return nv_device(priv)->crystal;
return 0;
case 0x00002000:
if (sctl & 0x00000040)
return 108000;
return 100000;
case 0x00003000:
/* vco_enable */
if (!(sctl & 0x00000001))
return 0;
sclk = read_vco(priv, clk);
sdiv = ((sctl & 0x003f0000) >> 16) + 2;
return (sclk * 2) / sdiv;
......@@ -95,7 +115,9 @@ read_pll(struct nva3_clock_priv *priv, int clk, u32 pll)
N = (coef & 0x0000ff00) >> 8;
P = (coef & 0x003f0000) >> 16;
/* no post-divider on these.. */
/* no post-divider on these..
* XXX: it looks more like two post-"dividers" that
* cross each other out in the default RPLL config */
if ((pll & 0x00ff00) == 0x00e800)
P = 1;
......@@ -136,6 +158,8 @@ nva3_clock_read(struct nouveau_clock *clk, enum nv_clk_src src)
nv_error(clk, "invalid clock source %d\n", src);
return -EINVAL;
}
return 0;
}
int
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment