Commit 3d8e8186 authored by Takashi Iwai's avatar Takashi Iwai

ALSA: doc: ReSTize MIXART.txt

Another simple conversion from a plain text file.
Put to cards directory.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 4e47556e
......@@ -11,3 +11,4 @@ Card-Specific Information
emu10k1-jack
via82xx-mixer
audiophile-usb
mixart
Alsa driver for Digigram miXart8 and miXart8AES/EBU soundcards
Digigram <alsa@digigram.com>
==============================================================
Alsa driver for Digigram miXart8 and miXart8AES/EBU soundcards
==============================================================
Digigram <alsa@digigram.com>
GENERAL
......@@ -48,11 +51,15 @@ formats are supported.
Mixer
-----
<Master> and <Master Capture> : analog volume control of playback and capture PCM.
<PCM 0-3> and <PCM Capture> : digital volume control of each analog substream.
<AES 0-3> and <AES Capture> : digital volume control of each AES/EBU substream.
<Monitoring> : Loopback from 'pcm0c' to 'pcm0p' with digital volume
and mute control.
<Master> and <Master Capture>
analog volume control of playback and capture PCM.
<PCM 0-3> and <PCM Capture>
digital volume control of each analog substream.
<AES 0-3> and <AES Capture>
digital volume control of each AES/EBU substream.
<Monitoring>
Loopback from 'pcm0c' to 'pcm0p' with digital volume
and mute control.
Rem : for best audio quality try to keep a 0 attenuation on the PCM
and AES volume controls which is set by 219 in the range from 0 to 255
......@@ -79,11 +86,14 @@ FIRMWARE
For loading the firmware automatically after the module is loaded, use a
install command. For example, add the following entry to
/etc/modprobe.d/mixart.conf for miXart driver:
::
install snd-mixart /sbin/modprobe --first-time -i snd-mixart && \
/usr/bin/mixartloader
(for 2.2/2.4 kernels, add "post-install snd-mixart /usr/bin/vxloader" to
/etc/modules.conf, instead.)
/etc/modules.conf, instead.)
The firmware binaries are installed on /usr/share/alsa/firmware
(or /usr/local/share/alsa/firmware, depending to the prefix option of
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment