cxl/region: Calculate performance data for a region

Calculate and store the performance data for a CXL region. Find the worst
read and write latency for all the included ranges from each of the devices
that attributes to the region and designate that as the latency data. Sum
all the read and write bandwidth data for each of the device region and
that is the total bandwidth for the region.

The perf list is expected to be constructed before the endpoint decoders
are registered and thus there should be no early reading of the entries
from the region assemble action. The calling of the region qos calculate
function is under the protection of cxl_dpa_rwsem and will ensure that
all DPA associated work has completed.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240308220055.2172956-10-dave.jiang@intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

drivers/cxl/core/cdat.c

@@ -9,6 +9,7 @@
 #include "cxlmem.h"
 #include "core.h"
 #include "cxl.h"
+#include "core.h"
 
 struct dsmas_entry {
 	struct range dpa_range;
@@ -515,3 +516,67 @@ void cxl_coordinates_combine(struct access_coordinate *out,
 }
 
 MODULE_IMPORT_NS(CXL);
+
+void cxl_region_perf_data_calculate(struct cxl_region *cxlr,
+				    struct cxl_endpoint_decoder *cxled)
+{
+	struct cxl_memdev *cxlmd = cxled_to_memdev(cxled);
+	struct cxl_port *port = cxlmd->endpoint;
+	struct cxl_dev_state *cxlds = cxlmd->cxlds;
+	struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds);
+	struct access_coordinate hb_coord[ACCESS_COORDINATE_MAX];
+	struct access_coordinate coord;
+	struct range dpa = {
+			.start = cxled->dpa_res->start,
+			.end = cxled->dpa_res->end,
+	};
+	struct cxl_dpa_perf *perf;
+	int rc;
+
+	switch (cxlr->mode) {
+	case CXL_DECODER_RAM:
+		perf = &mds->ram_perf;
+		break;
+	case CXL_DECODER_PMEM:
+		perf = &mds->pmem_perf;
+		break;
+	default:
+		return;
+	}
+
+	lockdep_assert_held(&cxl_dpa_rwsem);
+
+	if (!range_contains(&perf->dpa_range, &dpa))
+		return;
+
+	rc = cxl_hb_get_perf_coordinates(port, hb_coord);
+	if (rc)  {
+		dev_dbg(&port->dev, "Failed to retrieve hb perf coordinates.\n");
+		return;
+	}
+
+	for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) {
+		/* Pickup the host bridge coords */
+		cxl_coordinates_combine(&coord, &hb_coord[i], &perf->coord);
+
+		/* Get total bandwidth and the worst latency for the cxl region */
+		cxlr->coord[i].read_latency = max_t(unsigned int,
+						    cxlr->coord[i].read_latency,
+						    coord.read_latency);
+		cxlr->coord[i].write_latency = max_t(unsigned int,
+						     cxlr->coord[i].write_latency,
+						     coord.write_latency);
+		cxlr->coord[i].read_bandwidth += coord.read_bandwidth;
+		cxlr->coord[i].write_bandwidth += coord.write_bandwidth;
+
+		/*
+		 * Convert latency to nanosec from picosec to be consistent
+		 * with the resulting latency coordinates computed by the
+		 * HMAT_REPORTING code.
+		 */
+		cxlr->coord[i].read_latency =
+			DIV_ROUND_UP(cxlr->coord[i].read_latency, 1000);
+		cxlr->coord[i].write_latency =
+			DIV_ROUND_UP(cxlr->coord[i].write_latency, 1000);
+	}
+}

drivers/cxl/core/region.c

@@ -1752,6 +1752,8 @@ static int cxl_region_attach(struct cxl_region *cxlr,
 		return -EINVAL;
 	}
 
+	cxl_region_perf_data_calculate(cxlr, cxled);
+
 	if (test_bit(CXL_REGION_F_AUTO, &cxlr->flags)) {
 		int i;
 

drivers/cxl/cxl.h

@@ -517,6 +517,7 @@ struct cxl_region_params {
  * @cxlr_pmem: (for pmem regions) cached copy of the nvdimm bridge
  * @flags: Region state flags
  * @params: active + config params for the region
+ * @coord: QoS access coordinates for the region
  */
 struct cxl_region {
 	struct device dev;
@@ -527,6 +528,7 @@ struct cxl_region {
 	struct cxl_pmem_region *cxlr_pmem;
 	unsigned long flags;
 	struct cxl_region_params params;
+	struct access_coordinate coord[ACCESS_COORDINATE_MAX];
 };
 
 struct cxl_nvdimm_bridge {
@@ -881,6 +883,8 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port,
 				      struct access_coordinate *coord);
 int cxl_hb_get_perf_coordinates(struct cxl_port *port,
 				struct access_coordinate *coord);
+void cxl_region_perf_data_calculate(struct cxl_region *cxlr,
+				    struct cxl_endpoint_decoder *cxled);
 
 void cxl_memdev_update_perf(struct cxl_memdev *cxlmd);