Commit 3dfaa762 authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Kumar Gala

[POWERPC] kill isa_{io,mem}_base definitions for !PCI

When CONFIG_PCI is disabled, the definitions for isa_io_base,
isa_mem_base and pci_dram_offset are entirely unused, but they
can result in link failure because they are defined in multiple
places.

The easiest fix is to just remove all these definitions.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent 14305601
...@@ -28,11 +28,6 @@ ...@@ -28,11 +28,6 @@
#define DBG(fmt...) #define DBG(fmt...)
#endif #endif
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
/* ************************************************************************ /* ************************************************************************
* *
* Setup the architecture * Setup the architecture
......
...@@ -49,11 +49,6 @@ ...@@ -49,11 +49,6 @@
#define DBG(fmt...) #define DBG(fmt...)
#endif #endif
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
static u8 *bcsr_regs = NULL; static u8 *bcsr_regs = NULL;
/* ************************************************************************ /* ************************************************************************
......
...@@ -32,11 +32,6 @@ ...@@ -32,11 +32,6 @@
#define DBG(fmt...) #define DBG(fmt...)
#endif #endif
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
/* ************************************************************************ /* ************************************************************************
* *
* Setup the architecture * Setup the architecture
......
...@@ -38,11 +38,6 @@ ...@@ -38,11 +38,6 @@
#include "mpc83xx.h" #include "mpc83xx.h"
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
/* ************************************************************************ /* ************************************************************************
* *
* Setup the architecture * Setup the architecture
......
...@@ -38,11 +38,6 @@ ...@@ -38,11 +38,6 @@
#include "mpc83xx.h" #include "mpc83xx.h"
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
#define BCSR5_INT_USB 0x02 #define BCSR5_INT_USB 0x02
/* Note: This is only for PB, not for PB+PIB /* Note: This is only for PB, not for PB+PIB
* On PB only port0 is connected using ULPI */ * On PB only port0 is connected using ULPI */
......
...@@ -55,11 +55,6 @@ ...@@ -55,11 +55,6 @@
#define DBG(fmt...) #define DBG(fmt...)
#endif #endif
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
static u8 *bcsr_regs = NULL; static u8 *bcsr_regs = NULL;
/* ************************************************************************ /* ************************************************************************
......
...@@ -38,11 +38,6 @@ ...@@ -38,11 +38,6 @@
#include <asm/fs_pd.h> #include <asm/fs_pd.h>
#endif #endif
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
#ifdef CONFIG_PCI #ifdef CONFIG_PCI
static int mpc85xx_exclude_device(u_char bus, u_char devfn) static int mpc85xx_exclude_device(u_char bus, u_char devfn)
{ {
......
...@@ -47,11 +47,6 @@ ...@@ -47,11 +47,6 @@
#include <sysdev/fsl_soc.h> #include <sysdev/fsl_soc.h>
#include "mpc85xx.h" #include "mpc85xx.h"
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
static int cds_pci_slot = 2; static int cds_pci_slot = 2;
static volatile u8 *cadmus; static volatile u8 *cadmus;
......
...@@ -59,11 +59,6 @@ ...@@ -59,11 +59,6 @@
#define DBG(fmt...) #define DBG(fmt...)
#endif #endif
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
/* ************************************************************************ /* ************************************************************************
* *
* Setup the architecture * Setup the architecture
......
...@@ -44,13 +44,6 @@ ...@@ -44,13 +44,6 @@
#define DBG(fmt...) do { } while(0) #define DBG(fmt...) do { } while(0)
#endif #endif
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
unsigned long pci_dram_offset = 0;
#endif
#ifdef CONFIG_PCI #ifdef CONFIG_PCI
static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc) static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
{ {
......
...@@ -54,12 +54,6 @@ ...@@ -54,12 +54,6 @@
#define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000 #define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000
#ifndef CONFIG_PCI
isa_io_base = MPC7448_HPC2_ISA_IO_BASE;
isa_mem_base = MPC7448_HPC2_ISA_MEM_BASE;
pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET;
#endif
extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn) int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
......
...@@ -18,9 +18,4 @@ ...@@ -18,9 +18,4 @@
#include <asm/ppcboot.h> #include <asm/ppcboot.h>
/* Base Addresses for the PCI bus
*/
#define MPC7448_HPC2_PCI_MEM_OFFSET (0x00000000)
#define MPC7448_HPC2_ISA_IO_BASE (0x00000000)
#define MPC7448_HPC2_ISA_MEM_BASE (0x00000000)
#endif /* __PPC_PLATFORMS_MPC7448_HPC2_H */ #endif /* __PPC_PLATFORMS_MPC7448_HPC2_H */
...@@ -19,12 +19,6 @@ ...@@ -19,12 +19,6 @@
#ifdef CONFIG_PPC_86xx #ifdef CONFIG_PPC_86xx
#define _IO_BASE isa_io_base
#define _ISA_MEM_BASE isa_mem_base
#ifdef CONFIG_PCI
#define PCI_DRAM_OFFSET pci_dram_offset
#endif
#define CPU0_BOOT_RELEASE 0x01000000 #define CPU0_BOOT_RELEASE 0x01000000
#define CPU1_BOOT_RELEASE 0x02000000 #define CPU1_BOOT_RELEASE 0x02000000
#define CPU_ALL_RELEASED (CPU0_BOOT_RELEASE | CPU1_BOOT_RELEASE) #define CPU_ALL_RELEASED (CPU0_BOOT_RELEASE | CPU1_BOOT_RELEASE)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment