Commit 3dfaebda authored by Johannes Stezenbach's avatar Johannes Stezenbach Committed by Linus Torvalds

[PATCH] dvb: support for TT/Hauppauge Nexus-S Rev 2.3

Support for TT/Hauppauge Nexus-S Rev 2.3 (Oliver Endriss)
Signed-off-by: default avatarJohannes Stezenbach <js@linuxtv.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 958706c1
......@@ -1673,6 +1673,106 @@ static struct stv0299_config alps_bsru6_config = {
};
static u8 alps_bsbe1_inittab[] = {
0x01, 0x15,
0x02, 0x30,
0x03, 0x00,
0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
0x06, 0x40, /* DAC not used, set to high impendance mode */
0x07, 0x00, /* DAC LSB */
0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
0x09, 0x00, /* FIFO */
0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
0x10, 0x3f, // AGC2 0x3d
0x11, 0x84,
0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on
0x15, 0xc9, // lock detector threshold
0x16, 0x00,
0x17, 0x00,
0x18, 0x00,
0x19, 0x00,
0x1a, 0x00,
0x1f, 0x50,
0x20, 0x00,
0x21, 0x00,
0x22, 0x00,
0x23, 0x00,
0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
0x29, 0x1e, // 1/2 threshold
0x2a, 0x14, // 2/3 threshold
0x2b, 0x0f, // 3/4 threshold
0x2c, 0x09, // 5/6 threshold
0x2d, 0x05, // 7/8 threshold
0x2e, 0x01,
0x31, 0x1f, // test all FECs
0x32, 0x19, // viterbi and synchro search
0x33, 0xfc, // rs control
0x34, 0x93, // error control
0x0f, 0x92,
0xff, 0xff
};
static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
struct av7110* av7110 = (struct av7110*) fe->dvb->priv;
int ret;
u8 data[4];
u32 div;
struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
if ((params->frequency < 950000) || (params->frequency > 2150000))
return -EINVAL;
div = (params->frequency + (125 - 1)) / 125; // round correctly
data[0] = (div >> 8) & 0x7f;
data[1] = div & 0xff;
data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4;
ret = i2c_transfer(&av7110->i2c_adap, &msg, 1);
return (ret != 1) ? -EIO : 0;
}
static struct stv0299_config alps_bsbe1_config = {
.demod_address = 0x68,
.inittab = alps_bsbe1_inittab,
.mclk = 88000000UL,
.invert = 1,
.enhanced_tuning = 0,
.skip_reinit = 0,
.min_delay_ms = 100,
.set_symbol_rate = alps_bsru6_set_symbol_rate,
.pll_set = alps_bsbe1_pll_set,
};
static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
{
struct av7110* av7110 = (struct av7110*) fe->dvb->priv;
int ret;
u8 data[1];
struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) };
switch(voltage) {
case SEC_VOLTAGE_OFF:
data[0] = 0x00;
break;
case SEC_VOLTAGE_13:
data[0] = 0x44;
break;
case SEC_VOLTAGE_18:
data[0] = 0x4c;
break;
default:
return -EINVAL;
};
ret = i2c_transfer(&av7110->i2c_adap, &msg, 1);
return (ret != 1) ? -EIO : 0;
}
static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
......@@ -2116,6 +2216,14 @@ static int frontend_init(struct av7110 *av7110)
av7110->dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240;
break;
}
break;
case 0x000E: /* Hauppauge/TT Nexus-S rev 2.3 */
/* ALPS BSBE1 */
av7110->fe = stv0299_attach(&alps_bsbe1_config, &av7110->i2c_adap);
if (av7110->fe)
av7110->fe->ops->set_voltage = lnbp21_set_voltage;
break;
}
}
......@@ -2672,21 +2780,23 @@ MAKE_AV7110_INFO(ttt_1_X, "Technotrend/Hauppauge WinTV DVB-T rev1.X");
MAKE_AV7110_INFO(ttc_1_X, "Technotrend/Hauppauge WinTV Nexus-CA rev1.X");
MAKE_AV7110_INFO(ttc_2_X, "Technotrend/Hauppauge WinTV DVB-C rev2.X");
MAKE_AV7110_INFO(tts_2_X, "Technotrend/Hauppauge WinTV Nexus-S rev2.X");
MAKE_AV7110_INFO(tts_2_3, "Technotrend/Hauppauge WinTV Nexus-S rev2.3");
MAKE_AV7110_INFO(tts_1_3se, "Technotrend/Hauppauge WinTV DVB-S rev1.3 SE");
MAKE_AV7110_INFO(ttt, "Technotrend/Hauppauge DVB-T");
MAKE_AV7110_INFO(fsc, "Fujitsu Siemens DVB-C");
MAKE_AV7110_INFO(fss, "Fujitsu Siemens DVB-S rev1.6");
static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(fsc, 0x110a, 0x0000),
MAKE_EXTENSION_PCI(tts_1_X, 0x13c2, 0x0000),
MAKE_EXTENSION_PCI(ttt_1_X, 0x13c2, 0x0001),
MAKE_EXTENSION_PCI(ttc_2_X, 0x13c2, 0x0002),
MAKE_EXTENSION_PCI(tts_2_X, 0x13c2, 0x0003),
MAKE_EXTENSION_PCI(tts_1_3se, 0x13c2, 0x1002),
MAKE_EXTENSION_PCI(fsc, 0x110a, 0x0000),
MAKE_EXTENSION_PCI(ttc_1_X, 0x13c2, 0x000a),
MAKE_EXTENSION_PCI(fss, 0x13c2, 0x0006),
MAKE_EXTENSION_PCI(ttt, 0x13c2, 0x0008),
MAKE_EXTENSION_PCI(ttc_1_X, 0x13c2, 0x000a),
MAKE_EXTENSION_PCI(tts_2_3, 0x13c2, 0x000e),
MAKE_EXTENSION_PCI(tts_1_3se, 0x13c2, 0x1002),
/* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0004), UNDEFINED CARD */ // Galaxis DVB PC-Sat-Carte
/* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0005), UNDEFINED CARD */ // Technisat SkyStar1
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment